MAAM-000060-001SMB - Tyco Electronics

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or

information contained herein without notice.

Broadband CATV Amplifier

50 - 1000 MHz M/A-COM Products

Rev. V1

MAAMSS0060

ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for

development. Performance is based on target specifications, simulated results, and/or prototype

measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-

ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has

been fixed. Engineering samples and/or test data may be available. Commitment to produce in

volume is not guaranteed.

Functional Schematic

Features

• 75  Input / Output Match

• CTB: -75 dBc

• Noise Figure: 1.8 dB

• Gain: 17 dB, 20 dB

• Lead Free SOT-89 Package

• 100% Matte Tin Plating over Copper

• Halogen-Free “Green” Mold Compound

• RoHS* Compliant and 260°C Reflow Compatible

Description

M/A-COM’s MAAMSS0060 CATV amplifier is a

GaAs MMIC which exhibits low distortion in a lead

free miniature surface mount plastic package. The

MAAMSS0060 employs a monolithic single stage

design featuring a convenient 75  input/output

impedance that minimizes the number of external

components required.

The MAAMSS0060 provides low noise and high

linearity. It is ideally suited for set top boxes, home

gateways, FTTX, Drop Amplifiers, and other

broadband internet based appliances.

The MAAMSS0060 is fabricated using M/A-COM’s

PHEMT process to realize low noise and low

distortion. The process features full passivation for

robust performance and reliability. Absolute Maximum Ratings 3,4

Parameter Absolute Maximum

RF Input Power 6 dBm

Voltage 10.0 volts

Operating Temperature -40 °C to +85 °C

Storage Temperature -65 °C to +150 °C

Pin Configuration

Pin No. Pin Name Description

1 RFIN RF Input

2 GND Ground

3 RFOUT RF Output / Drain Supply

3. Exceeding any one or combination of these limits may cause

permanent damage to this device.

4. M/A-COM does not recommend sustained operation near

these survivability limits.

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

Ordering Information 1,2

Part Number Package

MAAMSS0060 Bulk Packaging

MAAMSS0060TR 1000 piece reel

MAAMSS0060TR-3000 3000 piece reel

MAAM-000060-001SMB 17 dB Gain Configuration

MAAM-000060-002SMB 20 dB Gain Configuration

1. Reference Application Note M513 for reel size information.

2. All sample boards include 5 loose parts.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or

information contained herein without notice.

Broadband CATV Amplifier

50 - 1000 MHz M/A-COM Products

Rev. V1

MAAMSS0060

ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for

development. Performance is based on target specifications, simulated results, and/or prototype

measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-

ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has

been fixed. Engineering samples and/or test data may be available. Commitment to produce in

volume is not guaranteed.

Parameter Test Conditions Units Min. Typ. Max.

Gain dB 15.8 17 17.8

Gain Flatness dB — 0.5 1.0

Noise Figure dB — 1.8 3.5

Input Return Loss dB — 20 —

Output Return Loss dB — 20 —

Output IP3 6 MHz Spacing, -10 dBm output per tone dBm — 37 —

Composite Triple Beat, CTB 132 channels, +30 dBmV / channel at the output. dBc — -75 —

Composite Second Order, CSO 132 channels, +30 dBmV / channel at the output. dBc — -60 —

P1dB dBm — 23 —

IDD 8 Volts mA — 120 140

17 dB Gain Configuration

Electrical Specifications: TA = 25°C, Freq: 50 - 1000 MHz, VDD = 8 Volts, Z0 = 75 Ω

Parameter Test Conditions Units Min. Typ. Max.

Gain dB — 20 —

Gain Flatness dB — 1 —

Noise Figure dB — 1.6 —

Input Return Loss dB — 12 —

Output Return Loss dB — 12 —

Output IP3 6 MHz Spacing, -10 dBm output per tone dBm — 35 —

Composite Triple Beat, CTB 132 channels, +33 dBmV / channel at the output. dBc — -66 —

Composite Second Order, CSO 132 channels, +33 dBmV / channel at the output. dBc — -55 —

P1dB dBm — 21 —

IDD 8 Volts mA — 120 —

20 dB Gain Configuration

Typical Performance: TA = 25°C, Freq: 50 - 1000 MHz, VDD = 8 Volts, Z0 = 75 Ω

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or

information contained herein without notice.

Broadband CATV Amplifier

50 - 1000 MHz M/A-COM Products

Rev. V1

MAAMSS0060

ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for

development. Performance is based on target specifications, simulated results, and/or prototype

measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-

ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has

been fixed. Engineering samples and/or test data may be available. Commitment to produce in

volume is not guaranteed.

17 & 20 dB Gain Configuration

Schematic Including Off-Chip Components

17 & 20 dB Gain Configuration

Recommended Board Layout

17 dB Gain Configuration

Off-Chip Component Values

Component Value Package

C1,C3,C4 0.01 µF 0402

C5 0.7 pF 0402

L15 1 µH 1210

L2 4.7 nH 0402

L3 8.2 nH 0402

R1 560  0402

C2 470 pF 0402

R2 91  0402

5. L1 supplied from EPCOS, part number B82422A1102K100

20 dB Gain Configuration

Off-Chip Component Values

6. L1 supplied from EPCOS, part number B82422A1152K100

Component Value Package

C1,C2,C3,C4 0.01 µF 0402

C5 0.75 pF 0402

L16 1.5 µH 1210

L2 10 nH 0402

L3 12 nH 0402

R1 750  0402

R2 360  0402

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or

information contained herein without notice.

Broadband CATV Amplifier

50 - 1000 MHz M/A-COM Products

Rev. V1

MAAMSS0060

ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for

development. Performance is based on target specifications, simulated results, and/or prototype

measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-

ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has

been fixed. Engineering samples and/or test data may be available. Commitment to produce in

volume is not guaranteed.

Gain to 3 GHz over Temperature

Gain to 1 GHz over Temperature

Typical Performance Curves: 17dB Gain Configuration

Noise Figure

0 200 400 600 800 1000

+25°C

-40°C

+85°C

Frequency (MHz)

-10

-5

0 500 1000 1500 2000 2500 3000

+25°C

-40°C

+85°C

Frequency (MHz)

-35

-30

-25

-20

-15

-10

-5

0 200 400 600 800 1000

+25°C

-40°C

+85°C

Frequency (MHz)

Output Return Loss over T emp erature

Input Return Loss over Temp erature

-35

-30

-25

-20

-15

-10

-5

0 200 400 600 800 1000

+25°C

-40°C

+85°C

Frequency (MHz)

0 200 400 600 800 1000

+25°C

Frequency (MHz)

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or

information contained herein without notice.

Broadband CATV Amplifier

50 - 1000 MHz M/A-COM Products

Rev. V1

MAAMSS0060

ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for

development. Performance is based on target specifications, simulated results, and/or prototype

measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-

ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has

been fixed. Engineering samples and/or test data may be available. Commitment to produce in

volume is not guaranteed.

Gain to 3 GHz

Gain to 1 GHz

Typical Performance Curves: 20 dB Gain Configuration

Output Return Loss

Input Return Loss

Noise Figure

0 200 400 600 800 1000

Frequency (MHz)

0 200 400 600 800 1000

+25°C

-40°C

+85°C

Frequency (MHz)

-10

-5

0 500 1000 1500 2000 2500 3000

+25°C

-40°C

+85°C

Frequency (MHz)

-25

-20

-15

-10

-5

0 200 400 600 800 1000

+25°C

-40°C

+85°C

Frequency (MHz)

-25

-20

-15

-10

-5

0 200 400 600 800 1000

+25°C

-40°C

+85°C

Frequency (MHz)

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or

information contained herein without notice.

Broadband CATV Amplifier

50 - 1000 MHz M/A-COM Products

Rev. V1

MAAMSS0060

ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for

development. Performance is based on target specifications, simulated results, and/or prototype

measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-

ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has

been fixed. Engineering samples and/or test data may be available. Commitment to produce in

volume is not guaranteed.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

Lead-Free SOT-89 Plastic Package†

† Reference Application Note M538 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.