Description
1W Power LED Light Source is a high performance
energy ecient device which can handle high thermal
and high driving current. The exposed pad design has
excellent heat transfer from the package to the mother-
board.
The Warm White Power LED is available in various color
temperature ranging from 2600K to 4000K. The product
has high Color Rendering Index (CRI) which provides
excellent color perception and visual clarity.
The low prole package design is suitable for a wide
variety of applications especially where height is a
constraint.
The package is compatible with reflow soldering
process. This will give more freedom and exibility to
the light source designer.
ASMT-Mx00
1 W Power LED Light Source
Data Sheet
Features
• Available in Green, Blue, Cool White and Warm White
color
• Energy ecient
• Exposed pad for excellent heat transfer
• Suitable for reow soldering process
• High current operation
• Long operation life
• Wide viewing angle
• Silicone encapsulation
• ESD of 16kV
• MSL 2A
Specications
• InGaN technology
• 3.6 V, 350 mA (typical)
• 120 viewing angle
Applications
• Portable (ash light, bicycle head light)
• Reading light
• Architectural lighting
• Garden lighting
• Decorative lighting
2
Package Dimensions
Notes
1. fV is the total luminous ux output as measured with an integrating sphere at 25 ms mono pulse condition.
2. Flux tolerance is ± 10 %.
10.00
8.50
8.50
5.08
0.81
2.00
METAL SLUG
2
2
1
1
3
3
∅ 5.26
∅ 8.00
10.60
5.25
3.30
1.27
1.30
ANODE
ANODE
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS.
2. TOLERANCE IS ± 0.1 mm UNLESS OTHERWISE SPECIFIED.
CATHODE
+
–
LED ZENER
Color Part Number
Luminous Flux, fV
[1,2] (lm) Test Current
(mA)
Dice
TechnologyMin. Typ. Max.
Green ASMT-MG00 25.5 40.0 73.0 350 InGaN
Blue ASMT-MB00 5.5 10.0 19.5 350 InGaN
Cool White ASMT-MW00 43.0 60.0 73.0 350 InGaN
Warm White ASMT-MY00 43.0 50.0 73.0 350 InGaN
Device Selection Guide at Junction Temperature Tj = 25°C
3
Part Numbering System
Color Bin Selection
Max Flux Bin Selection
Min Flux Bin Selection
Color
B - Blue
G - Green
W - Cool White
Y - Warm White
ASMT-M x 00 - N x1x2x30
Absolute Maximum Ratings (TA = 25°C)
Parameter ASMT-Mx00 Units
DC Forward Current [1] 350 mA
Peak Pulsing Current [2] 500 mA
Power Dissipation 1400 mW
LED Junction Temperature 110 °C
Operating Ambient Temperature Range -40 to +85 °C
Storage Temperature Range -40 to +100 °C
Soldering Temperature Refer to Figure 8
Notes:
1. DC forward current – derate linearly based on Figure 5.
2. Pulse condition duty factor = 10%, Frequency = 1 kHz.
Optical Characteristics (TA = 25 °C)
Part Number Color
Peak Wavelength
lPEAK (nm)
Typ.
Dominant Wavelength
lD [1] (nm)
Typ.
Viewing Angle
2q1/2 [2] (Degrees)
Typ.
Luminous Eciency
(lm/W)
Typ.
ASMT- MG00 Green 519 525 120 32
ASMT- MB00 Blue 460 467 120 8
Part Number Color
Correlated Color Temperature,
CCT (Kelvin)
Viewing Angle
2q½
[2] (Degrees)
Luminous Eciency
(lm/W)
Min. Max. Typ. Typ.
ASMT-MW00 Cool White 4000 10000 110 48
ASMT-MY00 Warm White 2600 4000 110 40
Notes:
1. The dominant wavelength, lD, is derived from the CIE Chromaticity Diagram and represents the color of the device.
2. q1/2 is the o-axis angle where the luminous intensity is 1/2 the peak intensity.
4
Figure 1. Relative intensity vs. wavelength Figure 2. Forward current vs. forward voltage
Figure 3. Relative luminous ux vs. mono pulse current Figure 4. Radiation pattern
Figure 5. Maximum forward current vs. ambient temperature
Derated based on TJMAX = 110°C, RqJA = 30°C/W, 40°C/W and 50°C/W
Figure 6. Dominant wavelength vs. forward current – InGaN devices
DOMINANT WAVELENGTH – nm
100
450
FORWARD CURRENT – mA
400
510
520
200150
540
530
250 300
490
350
480
470
460
500
GREEN
BLUE
I
F
– MAXIMUM FORWARD CURRENT – mA
0
0
T
A
– AMBIENT TEMPERATURE – C
90
300
350
2010 30
400
40 50 60
200
70 80
150
100
50
250
RθJA = 50 C/W
RθJA = 40 C/W
RθJA = 30 C/W
0
50
100
150
200
250
300
350
400
450
500
0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00
FORWARD VOLTAGE - V
FORWARD CURRENT - mA
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
380 430 480 530 580 630 680 730 780
WAVELENGTH - nm
RELATIVE INTENSITY
GREEN
BLUE
COOL WHITE
WARM WHITE
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 50 100 150 200 250 300 350 400 450 500
MONO PULSE CURRENT - mA
RELATIVE LUMINOUS FLUX (φ
V
) - lm
GREEN
BLUE
COOL WHITE
WARM WHITE
Electrical Characteristic (TA = 25°C)
Dice Type
Forward Voltage
VF (Volts) @ IF = 350mA
Reverse Voltage
VR (Volts)
Thermal Resistance
Rqj-ms (°C/W) [1]
Typ. Max. Max. Typ.
InGaN 3.6 4.0 5 10
Notes:
1. RqJ-ms is Thermal Resistance from LED junction to metal slug.
5
Figure 7. Chromaticity shift vs. current
*Note: (x,y) values @ 350 mA reference to (0.0)
Figure 8. Recommended reow soldering prole
Figure 9. Recommended soldering land pattern
217 C
200 C
150 C
60 - 120 SEC.
-6 C/SEC. MAX.
3 C/SEC. MAX.
3 C/SEC. MAX.
255 - 260 C
100 SEC. MAX.
10 - 30 SEC.
TIME
TEMPERATURE
(Acc. to J-STD-020C)
17.00 ± 0.20
1.00 ± 0.10
3.1 ± 0.10
8.40 ± 0.10
5.08 ± 0.10
10.70 ± 0.10
Y-COORDINATES
0
0.002
0
X-COORDINATES
0.008
0.014
0.0030.0020.001
0.016
0.004 0.005 0.006
0.01
0.007
0.008
0.006
0.004
0.012
100 mA
150 mA
250 mA
300 mA
350 mA
Figure 10. Temperature vs. relative forward voltage shift
Figure 11. Relative LOP vs. junction temperature
-300
-250
-200
-150
-100
-50
0
50
100
150
200
250
300
-40 -15 10 35 60 85
TEMPERATURE - °C
RELATIVE FORWARD VOLTAGE SHIFT (mV)
0
10
20
30
40
50
60
70
80
90
100
25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110
JUNCTION TEMPERATURE (°C)
RELATIVE LOP (%)
GREEN
BLUE
COOL WHITE
WARM WHITE
6
Flux Bin Limit (for reference only) [x1 x2]
Flux (lm) at 350 mA
Bin Min. Max.
A 5.5 7.0
B 7.0 9.0
C 9.0 11.5
D 11.5 15.0
E 15.0 19.5
F 19.5 25.5
G 25.5 33.0
H 33.0 43.0
J 43.0 56.0
K 56.0 73.0
Tolerance for each bin limits is ±10 %
Color Bin Selections [ X3 ]
Individual reel will contain parts from one full bin only
Cool White
0 Full Distribution
A A only
B B only
C C only
D D only
E E only
F F only
G G only
H H only
Z A and B only
Y B and C only
W C and D only
V D and E only
U E and F only
T F and G only
S G and H only
Q A, B and C only
P B, C and D only
N C, D and E only
M D, E and F only
L E, F and G only
K F, G and H only
J Special Color Bin
1 A, B, C and D only
2 E, F, G and H only
3 B, C, D and E only
4 C, D, E and F only
5 A, B, C, D and E only
6 B, C, D, E, and F only
Warm White
0 Full Distribution
A A only
B B only
C C only
D D only
E E only
F F only
Z A and B only
Y B and C only
W C and D only
V D and E only
U E and F only
Q A, B and C only
P B, C and D only
N C, D and E only
M D, E and F only
J Special Color Bin
1 A, B, C and D only
2 E, F, G and H only
3 B, C, D and E only
4 C, D, E and F only
5 A, B, C, D and E only
6 B, C, D, E, and F only
Color Bin Limits
Blue Min. (nm) Max. (nm)
A 460.0 465.0
B 465.0 470.0
C 470.0 475.0
D 475.0 480.0
Green Min. (nm) Max. (nm)
A 515.0 520.0
B 520.0 525.0
C 525.0 530.0
D 530.0 535.0
Tolerance = ±1 nm
Primary Color Binning
Warm
White
Color Limits
(Chromaticity Coordinates)
Bin A X
Y
0.452
0.434
0.488
0.447
0.470
0.414
0.438
0.403
Bin B X
Y
0.438
0.403
0.470
0.414
0.452
0.384
0.424
0.376
Bin C X
Y
0.407
0.393
0.418
0.422
0.452
0.434
0.438
0.403
Bin D X
Y
0.395
0.362
0.407
0.393
0.438
0.403
0.424
0.376
Bin E X
Y
0.381
0.377
0.387
0.404
0.418
0.422
0.407
0.393
Bin F X
Y
0.373
0.349
0.381
0.377
0.407
0.393
0.395
0.362
Tolerances ± 0.01
Cool
White
Color Limits
(Chromaticity Coordinates)
Bin A X
Y
0.367
0.400
0.362
0.372
0.329
0.345
0.329
0.369
Bin B X
Y
0.362
0.372
0.356
0.330
0.329
0.302
0.329
0.345
Bin C X
Y
0.329
0.369
0.329
0.345
0.305
0.322
0.301
0.342
Bin D X
Y
0.329
0.345
0.329
0.302
0.311
0.285
0.305
0.322
Bin E X
Y
0.303
0.333
0.307
0.311
0.283
0.284
0.274
0.301
Bin F X
Y
0.307
0.311
0.311
0.285
0.290
0.265
0.283
0.284
Bin G X
Y
0.388
0.417
0.379
0.383
0.362
0.372
0.367
0.400
Bin H X
Y
0.379
0.383
0.369
0.343
0.356
0.330
0.362
0.372
Tolerances ± 0.01
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.24 0.26 0.28 0.30 0.32 0.34
X-COORDINATE
0.36 0.38 0.40 0.440.42
Y - COORDINATE
B
C
E
D
A
F
10 k
7 k
5.6 k
4.5 k
4.0 k
G
H
BLACK BODY CURVE
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.48
0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52
X - COORDINATE
Y - COORDINATE
B
C
E
Black Body Curve
D
A
F
3.0k
3.5k
4.0k
2.6k
8
Sub-Color Binning
(Only Applicable for Color Bin A to Bin D and Bin G to Bin H)
Cool White (Chromaticity Coordinates)
Bin D1
X
Y
0.329
0.345
0.329
0.331
0.317
0.320
0.316
0.333
Bin D2
X
Y
0.329
0.331
0.329
0.320
0.318
0.310
0.317
0.320
Bin D3
X
Y
0.329
0.320
0.329
0.302
0.320
0.293
0.318
0.310
Bin D4
X
Y
0.316
0.333
0.317
0.320
0.307
0.311
0.305
0.322
Bin D5
X
Y
0.317
0.320
0.318
0.310
0.309
0.300
0.307
0.311
Bin D6
X
Y
0.318
0.310
0.320
0.293
0.311
0.285
0.309
0.300
Bin G1
X
Y
0.392
0.421
0.386
0.400
0.364
0.383
0.367
0.400
Bin G2
X
Y
0.386
0.400
0.382
0.385
0.362
0.372
0.364
0.383
Bin H1
X
Y
0.382
0.385
0.378
0.370
0.360
0.357
0.362
0.372
Bin H2
X
Y
0.378
0.370
0.375
0.358
0.358
0.343
0.360
0.357
Bin H3
X
Y
0.375
0.358
0.371
0.344
0.356
0.330
0.358
0.343
Tolerances ±0.01
0.24
0.26
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44
X - COORDINATE
Y - COORDINATE
Black Body Curve
4.5k
5.6k
7k
10k
4.0k
A1
A2A3
A4 B1
B2
B3
B4
B5
B6
C1
C2
C3
C4 D1
D2
D3
D4
D5
D6
G1
G2
H1
H2
H3
Color Limits
Cool White (Chromaticity Coordinates)
Bin A1
X
Y
0.364
0.383
0.367
0.400
0.348
0.385
0.347
0.372
Bin A2
X
Y
0.364
0.383
0.362
0.372
0.346
0.359
0.347
0.372
Bin A3
X
Y
0.329
0.357
0.329
0.369
0.348
0.385
0.347
0.372
Bin A4
X
Y
0.329
0.345
0.329
0.357
0.347
0.372
0.346
0.359
Bin B1
X
Y
0.362
0.372
0.360
0.357
0.344
0.344
0.346
0.359
Bin B2
X
Y
0.360
0.357
0.358
0.343
0.343
0.331
0.344
0.344
Bin B3
X
Y
0.358
0.343
0.356
0.330
0.341
0.314
0.343
0.331
Bin B4
X
Y
0.329
0.331
0.329
0.345
0.346
0.359
0.344
0.344
Bin B5
X
Y
0.329
0.331
0.344
0.344
0.343
0.331
0.329
0.320
Bin B6
X
Y
0.343
0.331
0.341
0.314
0.329
0.302
0.329
0.320
Bin C1
X
Y
0.329
0.369
0.329
0.357
0.315
0.344
0.314
0.355
Bin C2
X
Y
0.329
0.357
0.329
0.345
0.316
0.333
0.315
0.344
Bin C3
X
Y
0.314
0.355
0.315
0.344
0.303
0.333
0.301
0.342
Bin C4
X
Y
0.315
0.344
0.316
0.333
0.305
0.322
0.303
0.333
Handling Precaution
The encapsulation material of the product is made of
silicone for better reliability of the product. As silicone is
a soft material, please do not press on the silicone or poke
a sharp object onto the silicone. These might damage the
product and cause premature failure. During assembly
or handling, the unit should be held on the body (white
epoxy).
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0668EN
AV02-0129EN - August 23, 2007
Package Tube Dimensions
36.5
6.6
10.5
10.5
535
This product is classied as moisture sensitive level 2A
When the bag is opened, parts required to mount within
672 hours of factory conditions ≤30°C/60%, and stored
at <10% RH.
Devices required bake, before mounting if:
a) The humidity indicator card is >10% when read at
23±5°C
b) The pack has been opened for more than 672 hours.
Baking recommended condition: 60 ±5°C for 20 hours.
DISCLAIMER
AVAGO’S PRODUCTS AND SOFTWARE ARE NOT SPECIFICALLY DESIGNED, MANUFACTURED OR AUTHORIZED FOR SALE
AS PARTS, COMPONENTS OR ASSEMBLIES FOR THE PLANNING, CONSTRUCTION, MAINTENANCE OR DIRECT OPERATION
OF A NUCLEAR FACILITY OR FOR USE IN MEDICAL DEVICES OR APPLICATIONS. CUSTOMER IS SOLELY RESPONSIBLE,
AND WAIVES ALL RIGHTS TO MAKE CLAIMS AGAINST AVAGO OR ITS SUPPLIERS, FOR ALL LOSS, DAMAGE, EXPENSE OR
LIABILITY IN CONNECTION WITH SUCH USE.