Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369
Features
•Military Grade
•Good LO/RF Isolation
•Connectors Per
MIL-C-39012
•Low Conversion Loss
•Good Intermodulation
Performance
•Good LO/RF VSWR
Applications
•Down Converters
•Demodulators
•Pulse Modulators
•
Current Controlled Attenuators
•
Phase, Frequency Discriminators
Mixers
Balanced, OrthoQuad®
Outline Drawing
Electrical Specifications
6.6.17
Model 7A0129
Frequency Isolation LO-RF Convers. Loss VSWR RF, LO
GHz dB Min/Typ dB Max/Typ Max/Typ :1
12.4 - 18.0 14/20 9.5/8.0 2.2/1.7
Noise Fig.1IF Freq.2
dB Max MHz
10.0/9.0 DC-600
Note: Impedance: 50 ohms nominal. Operating temperature -54 to +95°C. LO drive of +8 dBm. All measure-
ments are made in 50 ohm system. For biased models, conversion loss and noise figures specify @ 0 dBm LO
power. Mixers have internal bias networks that allow operation over LO dynamic range ≥20 db while maintaining
optimum conversion loss.
Electrical and Mechanical Specifications subject to change without notice.
1Noise figure is single sideband using a 30 MHz amplifier having a noise of 1.5 dB. 2Upper IF frequency is the -
3dB response point.
Aluminum Cased Connectorized Components
NOTES:
1. FINISH: EPOXY PRIMER BLUE EPOXY PAINT
2. MARK PER MIL-STD-130
3. DIMENSIONS ARE IN INCHES
