SPEC NO: DSAF1093 REV NO: V.4 DATE: MAR/30/2009 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo ERP: 1203003895
3.2x1.0mm RIGHT ANGLE BI-COLOR SMD
CHIP LED LAMP
Part Number: APBA3210SURKCGKC-F01
Hyper Red
Green
Features
z3.2mmx1.0mm right angle SMT LED,1.5mm thickness.
zLow power consumption.
zWide viewing angle.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHs compliant.
Description
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
The Green source color devices are made with AlGaInP on
GaAs substrate Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the
specifications.
SPEC NO: DSAF1093 REV NO: V.4 DATE: MAR/30/2009 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo ERP: 1203003895
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APBA3210SURKCGKC-
F01
Hyper Red (AlGaInP)
WATER CLEAR
110 200
Green (AlGaInP) 18 50
120°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red
Green
650
574 nm IF=20mA
λD [1] Dominant Wavelength Hyper Red
Green
630
570 nm IF=20mA
Δλ1/2 Spectral Line Half-width Hyper Red
Green
28
20 nm IF=20mA
C Capacitance Hyper Red
Green
35
15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Hyper Red
Green
1.95
2.1
2.5
2.5 V IF=20mA
IR Reverse Current Hyper Red
Green 10
10 uA VR = 5V
Parameter Hyper Red Green Units
Power dissipation 75 75 mW
DC Forward Current 30 30 mA
Peak Forward Current [1] 185 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAF1093 REV NO: V.4 DATE: MAR/30/2009 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo ERP: 1203003895
APBA3210SURKCGKC-F01
Hyper Red
SPEC NO: DSAF1093 REV NO: V.4 DATE: MAR/30/2009 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo ERP: 1203003895
Green
SPEC NO: DSAF1093 REV NO: V.4 DATE: MAR/30/2009 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo ERP: 1203003895
APBA3210SURKCGKC-F01
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Dimensions
(Units : mm)
SPEC NO: DSAF1093 REV NO: V.4 DATE: MAR/30/2009 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo ERP: 1203003895
PACKING & LABEL SPECIFICATIONS APBA3210SURKCGKC-F01