3.2x1.0mm RIGHT ANGLE BI-COLOR SMD CHIP LED LAMP Part Number: APBA3210SURKCGKC-F01 Hyper Red Green Features Description z3.2mmx1.0mm right angle SMT LED,1.5mm thickness. The Hyper Red source color devices are made with Al- zLow power consumption. GaInP on GaAs substrate Light Emitting Diode. zWide viewing angle. The Green source color devices are made with AlGaInP on zPackage : 2000pcs / reel. GaAs substrate Light Emitting Diode. zMoisture sensitivity level : level 3. zRoHs compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1093 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAR/30/2009 DRAWN: X.J.Guo PAGE: 1 OF 6 ERP: 1203003895 Selection Guide Part No. Dice APBA3210SURKCGKCF01 Iv (mcd) [2] @ 20mA Lens Type Hyper Red (AlGaInP) WATER CLEAR Green (AlGaInP) Min. Typ. 110 200 18 50 Viewing Angle [1] 21/2 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Hyper Red Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 650 574 nm IF=20mA Hyper Red Green 630 570 nm IF=20mA Spectral Line Half-width Hyper Red Green 28 20 nm IF=20mA C Capacitance Hyper Red Green 35 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green 1.95 2.1 2.5 2.5 V IF=20mA IR Reverse Current Hyper Red Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA Reverse Voltage 5 Operating Temperature -40C To +85C Storage Temperature -40C To +85C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1093 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAR/30/2009 DRAWN: X.J.Guo PAGE: 2 OF 6 ERP: 1203003895 APBA3210SURKCGKC-F01 Hyper Red SPEC NO: DSAF1093 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAR/30/2009 DRAWN: X.J.Guo PAGE: 3 OF 6 ERP: 1203003895 Green SPEC NO: DSAF1093 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAR/30/2009 DRAWN: X.J.Guo PAGE: 4 OF 6 ERP: 1203003895 APBA3210SURKCGKC-F01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAF1093 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAR/30/2009 DRAWN: X.J.Guo PAGE: 5 OF 6 ERP: 1203003895 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF1093 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu APBA3210SURKCGKC-F01 DATE: MAR/30/2009 DRAWN: X.J.Guo PAGE: 6 OF 6 ERP: 1203003895