MBRF16H35 SERIES SCHOTTKY BARRIER RECTIFIERS
PRV : 35 - 60 Volts
Io : 16 Ampere
FEATURES :
* High current capability
* High surge current capability
* Low leakage, high voltage
* Glass passivated chip junction
* Pb / RoHS Free
MECHANICAL DATA :
* Case : Epoxy, Molded
* Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
* Polarity: As marked
* Mounting Position: Any
* Weight : 2.24 grams (Approximately)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTIC
S
(
Tc = 25°C unless otherwise noted
)
SYMBOL UNIT
Maximum Repetitive Peak Reverse Voltage VRRM V
Maximum Working peak Reverse Voltage VRWM V
Maximum DC blocking voltage VDC
Maximum Average Forward Current IF(AV) 16 A
Maximum Peak Forward Surge Current
8.3ms single half sine-wave superimposed
Maximum Instantaneous Forward T J = 25 °C
Voltage at IF = 16A, (Note 1) T J = 125 °C
Maximum Reverse Current at T J = 25 °CIRµA
Rated DC Blocking Voltage (Note 1) TJ = 125 °CIR(H) mA
Maximum Thermal Resistance, Junction to Case RθJC 3.0 °C/W
Operating Junction Temperature Range TJ - 65 to + 175 °C
Storang Temperature Range TSTG - 65 to + 175 °C
RMS Isolation Voltage from terminals to 4500(2)
heatsink with t = 1.0 second, RH ≤30% 3500(3)
1500(4)
Notes: (1) Pluse test: 300µs pulse width, 1% duty cycle
(2) Clip mounting (on case), where lead does not overlap heatsink with 0.110” offset
(3) Clip mounting (on case), where leads do overlap heatsink
(4) Screw mounting with 4-40 screw, where washer diameter is ≤ 4.9 mm (0.19”)
Page 1 of 2 Rev. 01 : May 26, 2005
35
VF
0.66
0.56
35 45
A
50
50
60
60
50 60
RATING
IFSM 150
MBRF16H35 MBRF16H45 MBRF16H50 MBRF16H60
35 45
45
V
VISOL
V
0.73
0.62
100
20
0.055(1.4)Max.
0.110(2.8)
0.098(2.5)
0.543(13.8)
0.512(13.2)
ITO-220AC
Dimensions in inches and
(
millimeters
)
0.100(2.55)
0.124(3.16)Max.
0.272(6.9)
0.248(6.3)
0.161(4.1)Max.
0.603(15.5)
0.573(14.8)
0.185(4.70)Max.
0.035(0.9)Max.
0.406(10.3)MAX.
0.134(3.4)DIA.
0.113(3.0)DIA.
0.112(2.85)
0.100(2.55)
0.030(0.76)Max.
12
PIN 1 PIN 2
RATING AND CHARACTERISTIC CURVES ( MBRF16H35 SERIES )
FIG.1 - FORWARD CURRENT FIG.2 - MAXIMUM NON-REPETITIVE
DERATING CURRENT PEAK FORWARD SURGE CURRENT
0 25 50 75 100 125 150 175 1 10 100
CASE TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz
FIG.3 - TYPICAL INSTANTANEOUS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
FORWARD CHARACTERISTICS
FIG. 5 – TYPICAL JUNCTION CAPACITANCE
Pa
g
e 2 of 2 Rev. 01 : Ma
y
26
,
2005
10000
20
16
12
8
0.1
150
0
25
125
100
75
1
60
1
100
0.001
10020 40 80
PERCENT OF RATED PEAK REVERSE
VOLTAGE, (%)
PEAK FORWARD SURGE
CURRENT, AMPERES
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
INSTANTANEOUS FORWARD
CURRENT, AMPERES
INSTANTANEOUS REVERSE
CURRENT, MICROAMPERES
0.1
00.2 0.4 0.6 0.8 1.0
INSTANTANEOUS FORWARD
VOLTAGE, VOLTS
0.01
4
50
0
0.0001
REVERSE VOLTAGE, VOLTS
0.1 1 10 100
1000
JUNCTION CAPACITANCE, pF
100
0
TJ = TJ max
8.3ms SINGLE HALF SINE-WAVE
(JEDEC) Method
TJ = 125 °C
TJ = 25 °C
0.01
10
TJ = 125 °C
TJ = 25 °C
TJ = 25°C
f = 1.0 MHz
Vsig = 50mVp-p
MBRF16H35 - MBRF16H45
MBRF16H50 - MBRF16H60
10
