MBRF16H35 SERIES SCHOTTKY BARRIER RECTIFIERS ITO-220AC PRV : 35 - 60 Volts Io : 16 Ampere 0.134(3.4)DIA. 0.113(3.0)DIA. FEATURES : * * * * * 0.185(4.70)Max. 0.406(10.3)MAX. 0.124(3.16)Max. 0.112(2.85) 0.100(2.55) High current capability High surge current capability Low leakage, high voltage Glass passivated chip junction Pb / RoHS Free 0.272(6.9) 0.248(6.3) 0.603(15.5) 0.573(14.8) 1 2 0.110(2.8) 0.098(2.5) 0.161(4.1)Max. 0.543(13.8) 0.512(13.2) 0.055(1.4)Max. MECHANICAL DATA : 0.035(0.9)Max. * Case : Epoxy, Molded * Lead Temperature for Soldering Purposes: 260C Max. for 10 Seconds * Polarity: As marked * Mounting Position: Any * Weight : 2.24 grams (Approximately) 0.030(0.76)Max. 0.100(2.55) PIN 1 PIN 2 Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS(Tc = 25C unless otherwise noted) RATING SYMBOL MBRF16H35 MBRF16H45 MBRF16H50 MBRF16H60 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 35 45 50 60 V Maximum Working peak Reverse Voltage VRWM 35 45 50 60 V Maximum DC blocking voltage VDC 35 45 50 60 Maximum Average Forward Current IF(AV) 16 A IFSM 150 A Maximum Peak Forward Surge Current 8.3ms single half sine-wave superimposed 0.66 0.73 0.56 0.62 Maximum Instantaneous Forward T J = 25 C Voltage at I F = 16A, (Note 1) T J = 125 C Maximum Reverse Current at T J = 25 C IR 100 A Rated DC Blocking Voltage (Note 1) TJ = 125 C IR(H) 20 mA RJC 3.0 C/W TJ - 65 to + 175 C TSTG - 65 to + 175 C Maximum Thermal Resistance, Junction to Case Operating Junction Temperature Range Storang Temperature Range VF (2) RMS Isolation Voltage from terminals to heatsink with t = 1.0 second, RH 30% V 4500 VISOL (3) 3500 V (4) 1500 Notes: (1) Pluse test: 300s pulse width, 1% duty cycle (2) Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset (3) Clip mounting (on case), where leads do overlap heatsink (4) Screw mounting with 4-40 screw, where washer diameter is 4.9 mm (0.19") Page 1 of 2 Rev. 01 : May 26, 2005 RATING AND CHARACTERISTIC CURVES ( MBRF16H35 SERIES ) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 150 20 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG.1 - FORWARD CURRENT DERATING CURRENT 16 12 8 4 0 0 25 50 75 100 125 150 100 75 50 25 0 175 TJ = TJ max 8.3ms SINGLE HALF SINE-WAVE (JEDEC) Method 125 1 10 CASE TEMPERATURE, ( C) 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FORWARD CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 100 TJ = 125 C 10 TJ = 25 C 1 0.1 0.01 0 1 TJ = 125 C 0.1 0.01 TJ = 25 C 0.001 0.0001 0.2 0.4 0.6 0.8 0 1.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 10000 TJ = 25C f = 1.0 MHz Vsig = 50mVp-p 1000 100 MBRF16H35 - MBRF16H45 MBRF16H50 - MBRF16H60 0.1 1 10 100 REVERSE VOLTAGE, VOLTS Page 2 of 2 Rev. 01 : May 26, 2005