VOW135, VOW136 www.vishay.com Vishay Semiconductors Widebody, High Isolation, High Speed Optocoupler, 1 MBd FEATURES * External creepage > 10 mm * Reinforced isolation NC 1 8 C (VCC) * Internal shield for very high input to output noise isolation A 2 7 B (VB) * High common mode interference immunity C 3 6 C (VO) NC 4 5 E (GND) * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * Solar inverters * Industrial motor drives 22660 * Welding equipment DESCRIPTION * Isolated industrial communications 1 MBd widebody optocouplers consist of a GaAlAs infrared emitting diode, optically coupled with an integrated photo detector. An integral Faraday shield provides a high level of noise isolation, required by high power switching applications. * Noise isolation of sensitive circuits AGENCY APPROVALS The safety application model number covering all products in this datasheet is VOW135 or VOW136 respectively. This model number should be used when consulting safety agency documents. Vishay's 1 MBd wide body couplers feature a high level of isolation distance, exhibiting an external creepage distance of > 10 mm. This makes these parts ideal for applications with working voltages exceeding 1000 V. * UL1577 * cUL * DIN EN 60747-5-5 (VDE 0884-5) * CQC ORDERING INFORMATION V O W 1 PART NUMBER 3 # - X 0 # PACKAGE OPTION AGENCY CERTIFIED/PACKAGE VDE, UL, cUL, CQC # T DIPW-8 TAPE AND REEL 10.16 mm typ. Option 7 0.75 mm CTR (%) 7 19 DIP-8, 400 mil, widebody VOW135-X001 VOW136-X001 SMD-8, 400 mil, option 7, widebody VOW135-X017T VOW136-X017T Rev. 1.1, 26-Mar-15 Document Number: 84156 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VOW135, VOW136 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER CONDITIONS SYMBOL VALUE UNIT INPUT Reverse voltage VR 3 V Forward current IF 25 mA t = 1 ms, duty cycle 50 % IFM 50 mA t 1 s, 300 pulses/s IFSM 1 A Power dissipation Pdiss 45 mW Input junction temperature Tj max. 125 C VS -0.5 to 30 V V Peak forward current Maximum surge forward current OUTPUT Supply voltage Output voltage VO -0.5 to 25 VEBO 5 V Average output current IO 8 mA Peak output current IO 16 mA Base current IB 5 mA Power dissipation Pdiss 100 mW Output junction temperature Tj max. 125 C Storage temperature range Tstg -55 to +150 C Ambient temperature range Tamb -40 to +100 C Tsld 260 C Emitter base voltage COUPLER max. 10 s, dip soldering 0.5 mm distance from case bottom Soldering temperature Ptot - Total Power Dissipation (mW) Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. 100 Output Detector 80 60 40 IR-LED 20 0 0 25 50 75 100 125 Tamb - Ambient Temperature (C) Fig. 1 - Maximum Power vs. Operating Temperature Rev. 1.1, 26-Mar-15 Document Number: 84156 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VOW135, VOW136 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 0 C to 70 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. 1.38 1.9 UNIT INPUT Forward voltage IF = 16 mA VF Breakdown voltage IR = 10 A VBR Reverse current Input capacitance Temperature coefficient of forward voltage V 3 V VR = 3 V IR 0.5 VR = 0 V, f = 1 MHz CI 36 pF IF = 16 mA VF/Tamb -1.9 mV/C 10 A OUTPUT Logic low supply current IF = 16 mA, VO = open, VCC = 15 V ICCL 50 200 A Logic high supply current IF = 0 A, VO = open, VCC = 15 V ICCH 0.02 2 A IF = 16 mA, VCC = 4.5 V, IO = 0.8 mA VOW135 VOL 0.1 0.5 V IF = 16 mA, VCC = 4.5 V, IO = 2.4 mA VOW136 VOL 0.1 0.5 V IF = 0 mA, VO = VCC = 5.5 V IOH 3 500 nA IF = 0 mA, VO = VCC =15 V IOH 0.01 1 A VR = 0 V, f = 1 MHz CO 3.70 pF f = 1 MHz CIO 0.9 pF Output voltage, output logic low Output current, output logic high Output capacitance COUPLER Capacitance (input to output) Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 0 C to 70 C, unless otherwise specified) PARAMETER Current transfer ratio TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 16 mA, VO = 0.4 V, VCC = 4.5 V, Tamb = 25 C VOW135 CTR 7 18 50 % VOW136 CTR 19 24 50 % IF = 16 mA, VO = 0.5 V, VCC = 4.5 V UNIT VOW135 CTR 5 19 % VOW136 CTR 15 25 % Pulse generator IF ZO = 50 t r , t f = 5 ns duty cycle 10 % t 100 s t 5V 1 8 2 7 3 6 VO 4 5 CL 15 pF VO IF IF monitor 5V RL 1.5 V VOL t 100 tPHL tPLH isfh6135_01 Fig. 2 - Schematics SWITCHING CHARACTERISTICS (Tamb = 0 C to 70 C, unless otherwise specified) PARAMETER High to low Low to high Rev. 1.1, 26-Mar-15 TEST CONDITION PART SYMBOL TYP. MAX. UNIT IF = 16 mA, VCC = 5 V, RL = 4.1 k VOW135 tPHL MIN. 0.2 2.0 s IF = 16 mA, VCC = 5 V, RL = 1.9 k VOW136 tPHL 0.2 1.0 s IF = 16 mA, VCC = 5 V, RL = 4.1 k VOW135 tPLH 1.3 2.0 s IF = 16 mA, VCC = 5 V, RL = 1.9 k VOW136 tPLH 0.6 1.0 s Document Number: 84156 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VOW135, VOW136 www.vishay.com Vishay Semiconductors VCM 10 V IF A B 1 8 2 7 3 6 4 5 90 % 10 % 5V 0V RL VO VO VFF 10 % 90 % t tr tf 5V A: IF = 0 mA t VO +VCM Pulse generator Z O = 50 t r , t f = 8 ns B: IF = 16 mA VOL isfh6135_02 t Fig. 3 - Common Mode Interference Immunity COMMON MODE TRANSIENT IMMUNITY (Tamb = 0 C to 70 C, unless otherwise specified) PARAMETER High Low TEST CONDITION PART SYMBOL MIN. VCM = 10 VPP, VCC = 5 V, IF = 0 mA, RL = 4.1 k VCM = 10 VPP, VCC = 5 V, IF = 0 mA, RL = 1.9 k VCM = 10 VPP, VCC = 5 V, IF = 16 mA, RL = 4.1 k VCM = 10 VPP, VCC = 5 V, IF = 16 mA, RL = 1.9 k VOW135 VOW136 VOW135 VOW136 CMH CMH CML CML 1000 1000 1000 1000 TYP. MAX. UNIT V/s V/s V/s V/s SAFETY AND INSULATION RATINGS PARAMETER SYMBOL Climatic classification (according to IEC 68 part 1) Comparative tracking index VALUE UNIT 55/100/21 CTI 250 VISO 5300 VRMS Maximum transient isolation voltage VIOTM 8000 Vpeak Maximum repetitive peak isolation voltage VIORM 1414 Vpeak Tamb = 25 C, VDC = 500 V RIO 1012 Tamb = 100 C, VDC = 500 V RIO 1011 Output safety power PSO 700 mW Input safety current ISI 400 mA Safety temperature TS 150 C 10 mm Maximum rated withstanding isolation voltage Insulation resistance t = 1 min Clearance distance (DIP-8, widebody) 10 mm DTI 0.4 mm Input to output test voltage, method B VIORM x 1.875 = VPR, 100 % production test with tM = 1 s, partial discharge < 5 pC VPR 2651 Vpeak Input to output test voltage, method A VIORM x 1.6 = VPR, 100 % production test with tM = 10 s, partial discharge < 5 pC VPR 2262 Vpeak Creepage distance (DIP-8, widebody) Insulation thickness Environment (pollution degree in accordance to DIN VDE 0109) 2 Note * As per DIN EN 60747-5-5, 7.4.3.8.2, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. Rev. 1.1, 26-Mar-15 Document Number: 84156 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VOW135, VOW136 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 100 IOH - High Level Output Current (nA) 1000 IF - Forward Current (mA) Tamb = 100 C Tamb = 75 C 10 Tamb = 25 C Tamb = 0 C Tamb = -40 C 1 1.0 1.2 1.4 1.6 IF = 0 mA 100 Vo = 15 V 10 1 Vo = 5.5 V 0.1 1.8 -40 VF - Forward Voltage (V) Fig. 4 - Output Current vs. Forward Voltage 20 40 60 80 100 1200 tp - Propagation Delay Time (ns) VCC = 5 V IO - Output Current (mA) 0 Fig. 7 - Logic High Level Output Current vs. Temperature 25 IF = 40 mA 20 IF = 30 mA 15 IF = 20 mA IF = 15 mA 10 IF = 10 mA 5 IF = 5 mA IF = 1 mA 0 RL = 4.1 k IF = 16 mA VCC = 5 V 1000 tPLH 800 600 400 tPHL 200 0 0 5 10 15 20 25 -40 VO - Output Voltage (V) -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) Fig. 5 - Output Current vs. Output Voltage Fig. 8 - Propagation Delay vs. Ambient Temperature - VOW135 8 1200 VO = 0.4 V VCC = 5 V 7 tp - Propagation Delay Time (ns) IO - Output Current (mA) -20 Tamb - Ambient Temperature (C) IF = 20 mA 6 5 IF = 10 mA 4 3 IF = 5 mA 2 1 IF = 1 mA 0 RL = 1.9 k IF = 16 mA VCC = 5 V 1000 800 tPLH 600 tPHL 400 200 0 -40 -20 0 20 40 60 80 Tamb - Ambient Temperature (C) Fig. 6 - Output Current vs. Temperature Rev. 1.1, 26-Mar-15 100 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) Fig. 9 - Propagation Delay vs. Ambient Temperature - VOW136 Document Number: 84156 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VOW135, VOW136 www.vishay.com Vishay Semiconductors 1.1 VO = 0.4 V Normalized Saturated CTR IF/IC - Small Signal CTR 0.6 0.5 0.4 0.3 0.2 RL = 100 VCC = 5 V 0.1 0 1 0.9 0.8 0.7 Normalized to CTR value: IF = 16 mA, VCC = 5 V, Tamb = 25 C 0.6 0 5 10 15 20 25 -40 Normalized Saturated CTR Tamb = 25 C VO = 0.4 V 1.4 1.2 1.0 0.8 0.6 Normalized to CTR value: IF = 16 mA, VCC = 5 V, Tamb = 25 C 0.4 0.2 0.1 1 10 100 Fig. 11 - Normalized Saturated CTR vs. Forward Current Normalized Non-Saturated CTR 20 40 60 80 100 1.1 VO = 5 V 1.0 0.9 0.8 0.7 Normalized to CTR value: IF = 16 mA, VCC = 5 V, Tamb = 25 C 0.6 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (C) IF - Forward Current (mA) 1.6 0 Fig. 13 - Normalized Saturated CTR vs. Ambient Temperature Normalized Non-Saturated CTR Fig. 10 - Small Signal Current Transfer Ratio vs. Forward Current 1.6 -20 Tamb - Ambient Temperature (C) IF - Forward Current (mA) Fig. 14 - Normalized Non-Saturated CTR vs. Ambient Temperature Tamb = 25 C VO = 5 V 1.4 1.2 1.0 0.8 0.6 0.4 Normalized to CTR value: IF = 16 mA, VCC = 5 V, Tamb = 25 C 0.2 0.1 1 10 100 IF - Forward Current (mA) Fig. 12 - Normalized Non-Saturated CTR vs. Forward Current Rev. 1.1, 26-Mar-15 Document Number: 84156 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VOW135, VOW136 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters DIP-8, widebody 11.30 max. 11.00 max. 10.90 0.15 1.32 0.05 3.50 0.40 3.90 0.10 0.51 min. 9.00 0.15 10.16 typ. 0.25 0 .05 2.54 nom. 7.0 nom . 1.75 0.15 0.50 0.05 8 7 6 5 1 2 3 4 SMD-8, widebody (option 7) 11.30 max. 12.30 0.30 11.00 max. 10.90 0.15 1.32 0.05 0.25 0.05 3.90 0.10 0.75 0.25 9.00 0.15 Min. 10.16 2.54 nom. 8 7 6 1.75 0.15 Lead coplanarity max. 0.10 1 0.15 5 2.54 R0 1.78 Recommended footprint .2 5 2.00 1 2 3 14.00 4 PACKAGE MARKING (example of VOW136-X017T) VOW136 V YWW 68 Note * Tape and reel suffix (T) is not part of the package marking. Rev. 1.1, 26-Mar-15 Document Number: 84156 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VOW135, VOW136 www.vishay.com Vishay Semiconductors PACKING INFORMATION (tape and reel) Top cover tape Embossed carrier Embossment 17998 Fig. 15 - Tape and Reel Shipping Medium Fig. 16 - Tape and Reel Packing Option 7 (750 parts per reel) Rev. 1.1, 26-Mar-15 Document Number: 84156 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VOW135, VOW136 www.vishay.com Vishay Semiconductors PACKING INFORMATION (tubes) DEVICE PER TUBE TYPE UNITS/TUBE TUBE/BOX UNITS/BOX 40 30 1200 DIP-8, widebody SOLDER PROFILES HANDLING AND STORAGE CONDITIONS 300 ESD level: HBM class 2 255 C 240 C 217 C 250 Temperature (C) max. 260 C 245 C Floor life: unlimited Conditions: Tamb < 30 C, RH < 85 % 200 Moisture sensitivity level 1, according to J-STD-020 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 C/s 50 max. ramp up 3 C/s 0 0 19841 50 100 150 200 250 300 Time (s) Fig. 17 - Lead (Pb)-free Reflow Solder Profile According to J-STD-020 for SMD Devices Rev. 1.1, 26-Mar-15 Document Number: 84156 9 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VOW136-X017T VOW135-X017T VOW136-X001 VOW135-X001