E3A2-R3M4D - Omron Electronics

E3A2 E3A2

Slim Sensor with Plug-in Outputs,

Built-in T ime Delays

■Plug-in replaceable outputs

■Light-ON/Dark-ON operation, switch

selectable

■Optional solid-state outputs

■Polarized diffuse and through-beam

models

■Timer models provide

selectable ON-delay , OFF-delay

and one-shot outputs

■Standard with 3 A relay output

AC/DC Supply with Timer Models E3A2

Ordering Information

Method of detection Through-beam Retroreflective Diffuse reflective

Sensing distance 10 m (32.8 ft) 3 m (9.8 ft) 70 cm (27.6 in)

Part number Without timer E3A2-10M4 E3A2-R3M4 E3A2-DS70M4

ON-delay , OFF-delay, one-shot E3A2-10M4T E3A2-R3M4T E3A2-DS70M4T

equal ON- and OFF-delays

(0.1 to 5 seconds)

Independent ON-delays and E3A2-10M4D E3A2-R3M4D E3A2-DS70M4D

OFF-delays (0.1 to 5 seconds)

■SENSORS

Description Part number

Solid-state AC (SCR) output module; 200 mA, 250 VAC max. load G3K-2R2P-1

output DC NPN output module; 200 mA, 30 VDC max. load, dual complementary G3KD-YR2P-1

modules DC PNP output module; 200 mA, 30 VDC max. load, dual complementary G3KD-YR2P-2

Reflector adapter for stud-mounting E39-R1 reflector E39-L7

■ACCESSORIES

Description Part number

Relay output module, SPDT, 3 A at 250 VAC (output supplied with each sensor) G6C-2117P-DC8

Reflector (supplied with retroreflective sensor) E39-R1

Mounting bracket (supplied with each sensor) E39-L34

■REPLACEMENT P ARTS

E3A2 E3A2

Specifications

Part number E3A2-10■■■ E3A2-R3■■■ E3A2-DS70■■■

Method of detection Through-beam Retroreflective Diffuse reflective

Supply voltage 24 to 240 VAC, 50/60 Hz; 12 to 240 VDC

Power Relay output type Emitter: 0.82 W max. 1.5 W max.

consumption DC solid-state output type Receiver: 1.2 W max.

AC solid-state output type Emitter: 0.82 VA max. 2 VA max.

Receiver: 1.2 VA max.

Sensing distance 10 m (32.8 ft) 3 m (9.8 ft) 70 cm (27.6 in) with

with E39-R1 reflector 10 x 10 cm (3.94 x 3.94 in)

(included) 90% reflectance white

mat paper

Light source Pulse modulated Pulse modulated red Pulse modulated

infrared LED (950 nm) LED, polarized (680 nm) infrared LED (950 nm)

Detectable object type Opaque materials, Opaque and mirror Opaque and

26 mm (1.02 in) surface materials, 56 mm translucent materials

minimum dimension (2.20 in) min. dimension

Operation mode Light-ON/Dark-ON, switch selectable

Sensitivity Fixed Adjustable

Mutual interference protection Not provided Provided

Control Relay Type SPDT with G6C-2117P-DC8 output module (standard)

output Max. load 3 A, 250 VAC (p.f. = 1); 3 A, 30 VDC

AC Type SCR with G3K-2R2P-1 output module (optional)

solid- Max. load 200 mA, 250 VAC

state Min. load 5 mA

Max. inrush 2 A

Off-state leakage current 1 mA max.

DC Type NPN-SPDT with G3KD-YR2P-1 output module (optional)

solid- PNP-SPDT with G3KD-YR2P-2 output module (optional)

state Max. load 200 mA, 30 VDC

Max. on-state voltage drop 2 VDC at 200 mA

Response Relay 15 ms max. with G6C-2117P-DC8 output module (standard)

time (ON AC solid-state output 30 ms max. with G3KD-2R2P-1 output module (optional)

and OFF) DC solid-state 1 ms max. with G3KD-YR2P-1 or -2 output modules (optional)

Timing T ype E3A2-■■■T Normal, ON-delay, OFF-delay, one-shot or equal ON- and OFF-delays,

functions switch selectable

T ype E3A2-■■■D Independent ON- and OFF-delays

Range 0.1 to 5 seconds

Circuit protection Output short-circuit Provided (AC solid-state and DC solid-state output modules only)

DC power supply reverse Provided

polarity

Indicators Emitter: Light Incident (red LED) and Output Stability

Power On (red LED) (green LED);

Receiver: Light Incident Output Operation (yellow LED) on timer-equipped

(red LED) and output sta- models

bility (green LED); Output

Operation (yellow LED) on

timer-equipped models

Materials Lens Plastic

Case Plastic

Mounting Side surface mount with two through holes; E39-L34 bracket and hardware included

Connections Conduit 1/2-14 NPT

Wire Terminal screws

Weight Emitter: 200 g (7.1 oz) 200 g (7.1 oz)

Receiver: 200 g (7.1 oz)

(Table continues on the next page)

E3A2 E3A2

Part number E3A2-10■■■ E3A2-R3■■■ E3A2-DS70■■■

Enclosure ratings NEMA 1, 4, 4X, 12

IEC 144 IP66

Approvals UL Listed, File Number E41515

Ambient Operating -25° to 55°C (-13° to 131°F)

temperature Storage -30° to 70°C (-22° to 159°F)

Specifications Table - continued from previous page

■CONNECTIONS

Through-Beam Type Retroreflective and Diffuse Reflective Types

■OUTPUT CIRCUIT DIAGRAMS

Relay output AC solid-state output

DC solid-state PNP output DC solid-state NPN output

Light Source Receiver

24 to 240 VAC

12 to 240 VDC

24 to 240 VAC

12 to 240 VDC See Output

Circuit Diagrams

See Output

Circuit Diagrams

24 to 240 VAC

12 to 240 VDC

E3A2 E3A2

■TIMING CHART

NOTE:

1. For sensors without built-in timer

functions, operation follows the

NORM mode shown with multi-

function time delay models.

2. T1, T2 and T denote set time, variable

within 0.1 to 5 second range.

3. For multifunction time delay models

(part numbers ending in “T”), the ON-

and OFF-delay time settings will be

the same.

4. For ON- and OFF-delay models (part

numbers ending in “D”), T1 and T 2 are

independently variable.

5. O.S.D.: one shot delay

E3A2 E3A2

■EXCESS GAIN RATIO

Through-Beam Type

Engineering Data

■LIGHT SOURCE/RECEIVER

SETTING RANGE

Through-Beam Type

Distance X [m (ft)]

Distance Y [cm (in)]

■REFLECTOR SETTING RANGE

Retroreflective Type

Distance X [m (ft)]

Distance Y [mm (in)]

■OPERATING RANGE

Diffuse Reflective Type

Distance X [cm (in)]

Distance Y [mm (in)]

■DETECTING DISTANCE VS. MINIMUM

TARGET SIZE (AT MAXIMUM SENSITIVITY)

Diffuse Reflective Type

Area of detectable object [cm2 (in2)]

Detecting distance [cm (in)]

Excess gain ratio

Distance [m (ft)]

Excess gain ratio

Distance [m (ft)]

Excess gain ratio

Distance [cm (in)]

Retroreflective Type Diffuse Reflective Type

E3A2 E3A2

Dimensions

Unit: mm (inch)

E39-R1 Reflector E39-L7 Reflector Adapter

LIGHT and STABILITY indicators LIGHT -ON/DARK-ON and

function selector

OPERATION indicator

(Timer function

equipped type only)

4-hexagonal spot facing

width across flats: 8 (.31)

depth: 4 (.16)

2-5.5 (.22) dia.

mounting holes

Mounting holes

OMRON ELECTRONICS LLC OMRON CANADA, INC.

One East Commerce Drive 885 Milner Avenue

Schaumburg, IL 60173 Scarborough, Ontario M1B 5V8

1-800-55-OMRON 416-286-6465

Cat. No. CEDSAX4 11/01 Specifications subject to change without notice. Printed in the U.S.A.

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.omron.com/oei

Canada - http://www.omron.com/oci