NPN SILICON GERMANIUM RF TRANSISTOR NESG3032M14 NPN SiGe RF TRANSISTOR FOR LOW NOISE, HIGH-GAIN AMPLIFICATION 4-PIN LEAD-LESS MINIMOLD (M14, 1208 PACKAGE) FEATURES * The device is an ideal choice for low noise, high-gain amplification NF = 0.6 dB TYP. @ VCE = 2 V, IC = 6 mA, f = 2.0 GHz * Maximum stable power gain: MSG = 20.5 dB TYP. @ VCE = 2 V, IC = 15 mA, f = 2.0 GHz * SiGe HBT technology (UHS3) adopted: fmax = 110 GHz * 4-pin lead-less minimold (M14, 1208 package) ORDERING INFORMATION Part Number Order Number NESG3032M14 NESG3032M14-A Package Quantity 4-pin lead-less minimold 50 pcs * 8 mm wide embossed taping (M14, 1208 package) (Non reel) * Pin 1 (Collector), Pin 4 (Emitter) face the (Pb-Free) NESG3032M14-T3 NESG3032M14-T3-A Supplying Form perforation side of the tape 10 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Unit sample quantity is 50 pcs. ABSOLUTE MAXIMUM RATINGS (TA = +25C) Parameter Symbol Ratings Unit Collector to Base Voltage VCBO 12.0 V Collector to Emitter Voltage VCEO 4.3 V Emitter to Base Voltage VEBO 1.5 V IC 35 mA 150 mW Collector Current Total Power Dissipation Ptot Note Junction Temperature Tj 150 C Storage Temperature Tstg -65 to +150 C Note Mounted on 1.08 cm2 x 1.0 mm (t) glass epoxy PWB Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. Document No. PU10575EJ01V0DS (1st edition) Date Published July 2005 CP(K) (c) NEC Compound Semiconductor Devices, Ltd. 2005 NESG3032M14 ELECTRICAL CHARACTERISTICS (TA = +25C) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit DC Characteristics Collector Cut-off Current ICBO VCB = 5 V, IE = 0 mA - - 100 nA Emitter Cut-off Current IEBO VEB = 1 V, IC = 0 mA - - 100 nA VCE = 2 V, IC = 6 mA 220 300 380 - S21e VCE = 2 V, IC = 15 mA, f = 2.0 GHz 15.0 17.5 - dB Noise Figure NF VCE = 2 V, IC = 6 mA, f = 2.0 GHz, ZS = ZSopt, ZL = ZLopt - 0.60 0.85 dB Associated Gain Ga VCE = 2 V, IC = 6 mA, f = 2.0 GHz, ZS = ZSopt, ZL = ZLopt - 17.5 - dB VCB = 2 V, IE = 0 mA, f = 1 MHz - 0.15 0.25 pF 17.5 20.5 - dB DC Current Gain hFE Note 1 RF Characteristics 2 Insertion Power Gain Reverse Transfer Capacitance Maximum Stable Power Gain Cre Note 2 Note MSG VCE = 2 V, IC = 15 mA, f = 2.0 GHz 3 Gain 1 dB Compression Output Power PO (1 dB) VCE = 3 V, IC (set) = 20 mA, f = 2.0 GHz, ZS = ZSopt, ZL = ZLopt - 12.5 - dBm 3rd Order Intermodulation Distortion Output Intercept Point OIP3 VCE = 3 V, IC (set) = 20 mA, f = 2.0 GHz, ZS = ZSopt, ZL = ZLopt - 24.0 - dBm Notes 1. Pulse measurement: PW 350 s, Duty Cycle 2% 2. Collector to base capacitance when the emitter grounded 3. MSG = S21 S12 hFE CLASSIFICATION Rank FB Marking zN hFE Value 220 to 380 S-PARAMETERS S-parameters/Noise parameters are provided on the NEC Compound Semiconductor Devices Web site in a form (S2P) that enables direct import to a microwave circuit simulator without keyboard input. Click here to download S-parameters. [RF and Microwave] [Device Parameters] URL http://www.ncsd.necel.com/ 2 Data Sheet PU10575EJ01V0DS NESG3032M14 PACKAGE DIMENSIONS 4-PIN LEAD-LESS MINIMOLD (M14, 1208 PACKAGE) (UNIT: mm) 1.00.05 0.150.05 2 0.11+0.1 -0.05 1 zN 4 0.8 0.50.05 1.2+0.07 -0.05 3 0.8+0.07 -0.05 PIN CONNECTIONS 1. 2. 3. 4. Collector Emitter Base NC (Connected with Pin 2) Data Sheet PU10575EJ01V0DS 3 NESG3032M14 When the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the authority having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license. * The information in this document is current as of July, 2005. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 4 Data Sheet PU10575EJ01V0DS NESG3032M14 For further information, please contact NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) Sales Division TEL: +81-44-435-1573 FAX: +81-44-435-1579 NEC Compound Semiconductor Devices Hong Kong Limited E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) FAX: +852-3107-7309 TEL: +852-3107-7303 Hong Kong Head Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Taipei Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 Korea Branch Office NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0504 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.