EC axial fan - ESM W1G230-EB89-01 sickled blades (S series) ESM wall ring ebm-papst Mulfingen GmbH & Co. KG Bachmuhle 2 * D-74673 Mulfingen Phone +49 7938 81-0 Fax +49 7938 81-110 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership * Headquarters Mulfingen County court Stuttgart * HRA 590344 General partner Elektrobau Mulfingen GmbH * Headquarters Mulfingen County court Stuttgart * HRB 590142 Nominal data Type W1G230-EB89-01 Motor M1G055-BD Phase 1~ 1~ Nominal voltage VAC 230 230 Frequency Hz 50/60 50/60 Speed min-1 1000 1500 Power input W - 26 Current draw A 0.2 Max. back pressure Pa 36 Min. ambient temperature C -30 -30 Max. ambient temperature C 50 50 Type of data definition ml ml = Max. load * me = Max. efficiency * fa = Running at free air * cs = Customer specs * cu = Customer unit Subject to alterations Item no. 50086-5-9980 * Revision 82579 * Release 2014-05-08 * Page 1 / 4 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com EC axial fan - ESM W1G230-EB89-01 sickled blades (S series) ESM wall ring Technical features Mass 1.05 kg Size 230 mm Material of impeller PA plastic 6, fibreglass-reinforced Material of wall ring Plastic, PPTD 20 Number of blades 5 Direction of air flow "V" Direction of rotation Counter-clockwise, seen on rotor Type of protection IP 54 Insulation class "B" Humidity class F3-1 Max. permissible ambient motor temp. (transp./ storage) +80 C Min. permissible ambient motor temp. (transp./storage) -40 C Mounting position Any Condensate discharge holes None Operation mode S1 Motor bearing Ball bearing Technical features - Over-temperature protected motor - Soft start - Speed selection max/min Speed steps 2 EMC interference immunity Acc. to EN 61000-6-2 (industrial environment) EMC harmonics Acc. to EN 61000-3-2/3 EMC interference emission Acc. to EN 61000-6-3 (household environment) Motor protection Thermal overload protector (TOP) wired internally Cable exit Lateral Protection class II Product conforming to standard EN 60335-1; CE Approval CSA C22.2 Nr.77; EAC; UL 2111; VDE Item no. 50086-5-9980 * Revision 82579 * Release 2014-05-08 * Page 2 / 4 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com W1G230-EB89-01 EC axial fan - ESM sickled blades (S series) ESM wall ring Product drawing 1 Direction of air flow "V" 2 Direction of rotation counter-clockwise, seen on rotor 3 Connection line AWG20; 3 x brass lead tips crimped Connection screen Item no. 50086-5-9980 * Revision 82579 * Release 2014-05-08 * Page 3 / 4 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com EC axial fan - ESM W1G230-EB89-01 sickled blades (S series) ESM wall ring Charts: Air flow 50 Hz Druck p f s[Pa]fur Rho=1,2kg/m^3 0 50 100 150 200 250 300 qv [cfm] 350 400 450 500 550 600 650 700 80 750 0,32 0,31 75 0,3 0,29 70 Measurement: LU-112479 Measurement: LU-112480 0,28 0,27 65 0,26 0,25 60 0,24 0,23 55 0,22 0,21 50 0,2 pfs[Pa] 0,18 0,17 40 0,16 4 0,15 35 psf [IN H2O] 0,19 45 Air performance measured as per ISO 5801 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 13347 / LpA measured with 1m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. 0,14 0,13 3 30 0,12 0,11 25 0,1 0,09 20 0,08 8 15 0,07 2 7 0,06 0,05 10 0,04 6 5 0 100 200 300 400 500 0,02 a] pfs[P 0 0,03 ] [Pa pfs 5 0,01 1 600 700 qv [m/h] 800 900 1.000 1.100 1.200 0 1.300 Measured values U f n Ped I LpAin LwAin qv pfs V Hz min-1 W A dB(A) dB(A) m3/h Pa 1 230 50 1500 24 0.19 51 58 980 0 2 230 50 1500 25 0.19 51 58 875 15 3 230 50 1500 25 0.19 50 58 750 30 4 230 50 1500 26 0.20 49 57 670 36 5 230 50 1000 10 0.09 39 48 635 0 6 230 50 1000 10 0.09 39 48 575 7 7 230 50 1000 11 0.10 40 48 500 14 8 230 50 1000 11 0.10 40 48 445 16 U = Supply voltage * f = Frequency * n = Speed * Ped = Power input * I = Current draw * LpAin = Sound pressure level inlet side * LwAin = Sound power level inlet side * qv = Air flow pfs = Pressure increase Item no. 50086-5-9980 * Revision 82579 * Release 2014-05-08 * Page 4 / 4 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com