SPECIFICATION CONTROL DRAWING
Raychem THERMOFIT
DEVICES Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE: SOLDERSLEEVE* DEVICE
WITH LOCALIZED SOLDER
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.: B-013-8X
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D980891 REPLACES:
B0138X
DRAWN BY:
M. FORONDA DATE: 07/10/98 PROD. REV.
SEE TABLE DOC ISSUE:
2 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Product Dimensions Cable Dimensions
Product Name øA
min øB
min L
max C
min øE
min D
max øG
max
B-013-80 A 3.2
(0.125) 1.8
(0.070) 30.6
(1.205) 0.65
(0.025) 1.4
(0.055) 3.2
(0.125) 1.8
(0.070)
B-013-81 A 4.7
(0.185) 2.5
(0.100) 30.6
(1.205) 1.3
(0.050) 1.8
(0.070) 4.7
(0.185) 2.5
(0.100)
B-013-82 A 5.8
(0.230) 3.2
(0.125) 29.6
(1.165) 1.3
(0.050) 2.4
(0.095) 5.8
(0.230) 3.2
(0.125)
B-013-83 B 7.1
(0.280) 4.2
(0.165) 30
(1.180) 1.3
(0.050) 3.5
(0.140) 7.1
(0.280) 4.2
(0.165)
B-013-84 B 7.5
(0.295) 5.0
(0.195) 30
(1.180) 1.3
(0.050) 4.3
(0.170) 7.5
(0.295) 5.0
(0.195)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
3. MELTABLE SEALING RINGS: Modified polyvinylidene fluoride. Color: blue.
APPLICATION
1. These controlled soldering devices are designed for the termination of a tin plated copper shield of a cable having an insulation
rated for at least +125°C.
2. Temperature range: -65°C to +150°C. For application tooling, contact your local Raychem technical service.
For best results, prepare the cable as shown:
* A trademark of Raychem Corpor ation.
