Only One Name Means ProTek’Tion™
The MSMFxxC series are mul-line TVS arrays designed to protect wireless telecommunicaons and portable electron-
ic applicaons from the damaging eects of ESD and EFT. The MSMFxxC is available in a 5 line unidireconal or 4 line
bidireconal conguraon and is rated at 100 Was peak pulse power, which is sucient protecon for terary type
lightning threats at key interface locaons.
Packaged in a miniature SOT-563, the MSMFxxC series meets IEC 61000-4-2 (ESD) and 61000-4-4 (EFT) immunity
requirements. Each device should be placed near a connector to provide the best protecon against transients.
• Compable with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV
• Compable with IEC 61000-4-4 (EFT): 40A, 5/50ns
• 100 Was Peak Pulse Power per Line(tp = 8/20µs)
• Monolithic Design
• Available in Mulple Voltages
• Low Clamping Voltage
• ESD Protecon > 25 kilovolts
• Low Leakage Current
• Protects 4 Bidireconal Lines & 5 Unidireconal Lines
• RoHS Compliant
• REACH Compliant
• Molded JEDEC SOT-563 Package
• Approximate Weight: 3 milligrams
• Lead-Free Nickel Paladium Gold Plang
• Solder Reow Temperature - 260-270°C
• Flammability Rang UL 94V-0
• 8mm Tape and Reel per EIA Standard 481
• Communicaon Systems
• SMART Phones
• Portable Electronics
• Video Interfaces
16
5
2
34
Only One Name Means ProTek’Tion™
Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 100 Was
Operang Temperature TL-55 to 150 °C
Storage Temperature TSTG -55 to 150 °C
Maximum Forward Voltage @ 10mA VF1.0 V
100W, 8/20µs Waveform
MSMF05C B 5.0 6.0 12.0V @ 9.0A 1 40
MSMF12C D 12.0 13.3 23.8V @ 4.2A 1 20
MSMF15C F 15.0 16.7 33.3V @ 3.0A 1 15
MSMF24C H 24.0 26.7 55.5V @ 1.8A 1 10
1. Pins 1, 3, 4, 5 or 6 to pin 2.
Only One Name Means ProTek’Tion™
Peak Pulse Power
8/20µs
Average Power
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
tf
e-t
Peak Value IPP
td = t/(IPP/2)
Only One Name Means ProTek’Tion™
A 1.50 1.70 0.059 0.067
B 1.10 1.30 0.043 0.051
C 0.50 0.60 0.020 0.024
D 0.17 0.27 0.007 0.011
G 0.50 BSC 0.020 BSC
J 0.08 0.18 0.003 0.007
K 0.10 0.30 0.004 0.012
S 1.50 1.70 0.059 0.067
1. Controlling dimension: inches.
2. Dimensioning and tolerances per ANSI Y14.5M, 1985.
3. Dimensions are exclusive of mold ash and metal burrs.
A 1.40 0.055
B 1.02 0.040
C 0.30 0.012
D 0.51 0.020
E 0.51 0.020
1. Controlling dimension: inches.
A
B
D
GJ
C K
S
1
A
B
D
CE
Only One Name Means ProTek’Tion™
MSMFxxC -P -T7 3,000 7” n/a
MSMFxxC -P -T13 10,000 13” n/a
178mm (7”) 8mm 1.78 ± 0.05 1.78 ± 0.05 0.69 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.25
1. Dimensions are in millimeters.
2. Surface mount product is taped and reeled in accordance with EIA-481.
3. Sux - T7 = 7” Reel - 3,000 pieces per 8mm tape.
4. Sux - T13 = 13” Reel - 10,000 pieces per 8mm tape.
5. Marking on Part - marking code (see page 2) and pin one dened by dot on package.
Package outline, pad layout and tape specicaons per document number 06051.R3 3/11.
Top Cover Tape
K0
D
P0
P2
10 Pitches Cumulave
Tolerance on Tape. ± 0.2
A0
B0
P
E
F
W
User Direcon of Feed
Pin 1
t
Only One Name Means ProTek’Tion™
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specically for
the protecon of electronic systems from the eects of lightning, Electrostac Discharge (ESD), Nuclear Electromagnec Pulse (NEMP), in-
ducve switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide
applicaon specic protecon soluons for all electronic equipment/systems.
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.
COPYRIGHT © ProTek Devices 2005 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteriscs described herein without noce.
DESIGN CHANGES: ProTek reserves the right to disconnue product lines without noce and that the nal judgement concerning selecon and specicaons is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selecon or specicaons of such products. ProTek makes no warranty, representaon or guarantee regarding the suitability of
its products for any parcular purpose, nor does ProTek assume any liability arising out of the applicaon or use of any product or circuit and specically disclaims any and all liability without limitaon special,
consequenal or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wrien consent from the factory.
2929 South Fair Lane
Tempe, Arizona 85282
USA
General: 602-431-8101
Sales: 602-414-5109
Customer Service: 602-414-5114
General: 602-431-2288
Sales: sales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com
www.protekdevices.com
www.protekanalog.com
