CSM_XW2Z_DS_E_5_3
1
Connecting Cables for Connector-Terminal Block Conversion Units (Shielded)
XW2Z
Connect Connector-Terminal
Block Conversion Units (XW2@) to
I/O Units for Programmable
Controllers with one touch.
Ordering Information
For 32-point, Connector-type I/O Units for Programmable Controllers
XW2Z-@@@A
(For XW2D-20G6/XW2B-20G@/-40G5-T/-20G5-D/
XW2C-20G5-IN16/20G6-IO16/XW2E-20G5-IN16/
XW2F-20G7-IN16/-OUT16/XW2N-20G8-IN16)
*Cable length L (m)
Cable length L (m) * Model
0.5 XW2Z-050A
1.0 XW2Z-100A
1.5 XW2Z-150A
2.0 XW2Z-200A
3.0 XW2Z-300A
5.0 XW2Z-500A
10.0 XW2Z-010A
15.0 XW2Z-15MA
20.0 XW2Z-20MA
L
Shielded
XW2Z
2
For 32-point, Connector-type I/O Units (Group 2) for Programmable Controllers
For 64-point, Connector-type I/O Units for Programmable Controllers
XW2Z-@@@B (For XW2D-40G6/XW2B-40G@)
*Cable length L (m)
XW2Z-@@@B-A (For XW2F-40G7-IN32)
For 32-point, Connector-type Input Units (Group 2) for Programmable Controllers
For 64-point, Connector-type Input Units for Programmable Controllers
XW2Z-@@@D
20-pole Cable with Discrete-wire Press-fit Terminals
XW2Z-@@@F
Type Cable length L (m) * Model
Normal
wiring
0.5 XW2Z-050B
1.0 XW2Z-100B
1.5 XW2Z-150B
2.0 XW2Z-200B
3.0 XW2Z-300B
5.0 XW2Z-500B
10.0 XW2Z-010B
15.0 XW2Z-15MB
20.0 XW2Z-20MB
Reverse
wiring
0.5 XW2Z-050B-R1
1.0 XW2Z-100B-R1
1.5 XW2Z-150B-R1
2.0 XW2Z-200B-R1
3.0 XW2Z-300B-R1
5.0 XW2Z-500B-R1
L
Type Cable length L (m) * Model
Normal
wiring
1.0 XW2Z-100B-A
1.5 XW2Z-150B-A
2.0 XW2Z-200B-A
3.0 XW2Z-300B-A
5.0 XW2Z-500B-A
Cable length L (m) * Model
1.0 0.75 XW2Z-100D
1.5 1.25 XW2Z-150D
2.0 1.75 XW2Z-200D
3.0 2.75 XW2Z-300D
5.0 4.75 XW2Z-500D
10.0 9.75 XW2Z-010D
15.0 14.75 XW2Z-15MD
20.0 19.75 XW2Z-20MD
Cable length L (m) * Model
1.0 XW2Z-100F
1.5 XW2Z-150F
2.0 XW2Z-200F
3.0 XW2Z-300F
5.0 XW2Z-500F
10.0 XW2Z-010F
15.0 XW2Z-15MF
20.0 XW2Z-20MF
*Cable length L (m)
A
B
Yellow
Black
CN3
(250 mm)
CN2
(500 mm)
CN1
A
B
*Cable length L (m)
L
Forked
terminals
(M3.5)
XG4M-2030-T
Devices
300 (mm)
XW2Z
3
For 32-point, Connector-type Output Units (Group 2) for Programmable Controllers
For 64-point, Connector-type Output Units for Programmable Controllers
XW2Z-@@@L
For 96-point, Connector-type I/O Units for Programmable Controllers
XW2Z-@@@H-1 (For CS1-series I/O Unit Connection)
*Up to two cables required for each Programmable Controller I/O Unit.
Note: CS1 signal names connected to the XW2B/D are different for the XW2Z-@@@H-@ and the XW2Z-@@@H-@G.
Refer to the I/O Signal Tables on page 9.
XW2Z-@@@H-2 (For CS1-series I/O Unit Connection)
*Up to two cables required for each Programmable Controller I/O Unit.
Note: CS1 signal names connected to the XW2B/D are different for the XW2Z-@@@H-@ and the XW2Z-@@@H-@G.
Refer to the I/O Signal Tables on page 9.
Cable length L (m) * Model
1.0 0.75 XW2Z-100L
1.5 1.25 XW2Z-150L
2.0 1.75 XW2Z-200L
3.0 2.75 XW2Z-300L
5.0 4.75 XW2Z-500L
10.0 9.75 XW2Z-010L
15.0 14.75 XW2Z-15ML
20.0 19.75 XW2Z-20ML
Special Connecting Cables *
Cable length L (m) Model
0.5 XW2Z-050H-1
1.0 XW2Z-100H-1
1.5 XW2Z-150H-1
2.0 XW2Z-200H-1
3.0 XW2Z-300H-1
5.0 XW2Z-500H-1
7.0 XW2Z-700H-1
10.0 XW2Z-010H-1
1.0 XW2Z-100H-1G
1.5 XW2Z-150H-1G
2.0 XW2Z-200H-1G
3.0 XW2Z-300H-1G
5.0 XW2Z-500H-1G
Special Connecting Cables *
Cable length L (m) Model
1.0 0.75 XW2Z-100H-2
1.5 1.25 XW2Z-150H-2
2.0 1.75 XW2Z-200H-2
3.0 2.75 XW2Z-300H-2
5.0 4.75 XW2Z-500H-2
10.0 9.75 XW2Z-010H-2
1.0 0.75 XW2Z-100H-2G
1.5 1.25 XW2Z-150H-2G
2.0 1.75 XW2Z-200H-2G
3.0 2.75 XW2Z-300H-2G
5.0 4.75 XW2Z-500H-2G
*Cable length L (m)
A
B
Green
White
CN3
CN1
CN2
(250 mm)
(500 mm)
A
B
*Cable length L (m)
L
*Cable length L (m)
A
B
Ye l l o w
Black
CN3
CN1
CN2
(250 mm)
(500 mm)
Linear lengths (not including bends)
A
B
XW2Z
4
XW2Z-@@@H-3 (For CS1-series I/O Unit Connection)
*Up to two cables required for each Programmable Controller I/O Unit.
For 32-point, MIL Connector-type I/O Units for Programmable Controllers
XW2Z-@@@K
XW2Z-@@@N
XW2Z-@@@X
Special Connecting Cables *
Cable length L (m) Model
1.0 0.75 1.0 XW2Z-100H-3
1.5 1.25 1.5 XW2Z-150H-3
2.0 1.75 2.0 XW2Z-200H-3
3.0 2.75 3.0 XW2Z-300H-3
5.0 4.75 5.0 XW2Z-500H-3
10.0 9.75 10.0 XW2Z-010H-3
Cable length L (m) * Model
0.25 XW2Z-C25K
0.5 XW2Z-C50K
1.0 XW2Z-100K
1.5 XW2Z-150K
2.0 XW2Z-200K
3.0 XW2Z-300K
5.0 XW2Z-500K
Cable length L (m) * Model
1.0 0.75 XW2Z-100N
1.5 1.25 XW2Z-150N
2.0 1.75 XW2Z-200N
3.0 2.75 XW2Z-300N
5.0 4.75 XW2Z-500N
10.0 9.75 XW2Z-010N
15.0 14.75 XW2Z-15MN
20.0 19.75 XW2Z-20MN
Cable length L (m) * Model
0.5 XW2Z-C50X
1.0 XW2Z-100X
2.0 XW2Z-200X
3.0 XW2Z-300X
5.0 XW2Z-500X
10.0 XW2Z-010X
*Cable length L (m)
Linear lengths (not including bends)
CN4
CN1
Black
Yellow
Gray
CN2
CN3
(500 mm)
(250 mm)
(500 mm)
C
B
A
A
B
C
*Cable length L (m)
L
*Cable length L (m)
Linear lengths (not including bends)
CN1
CN2
CN3
(500 mm)
(250 mm)
Green
Black
B
A
A
B
*Cable length L (m)
L
XW2Z
5
Ratings and Specifications
*1. Contact resistance for the Connector.
*2. Dielectric strength for the Connector.
Materials and Finish
Note: These housings, contacts, and connecting screws are made by Fujitsu.
Rated current 1 A
Rated voltage 125 VAC 24 VDC
Contact resistance 20 mΩ max. (at 20 mV, 100 mA max.) *1
Insulation resistance 100 MΩ min. (at 500 VDC)
Dielectric strength 500 VAC for 1 min (leakage current: 1 mA max.) *2
Ambient operating
temperature 0 to 80°C
Item Part name Materials and Finish
Connectors
XG4M-2030
XG4M-4030
Housing Fiber-glass reinforced PBT resin (UL94V-0)/black
Cover
Contacts Mating end Phosphor bronze/nickel base, 0.15-μm gold plating
Press-fit end Phosphor bronze/nickel base, 2.0-μm tin plating
XG4T-2004/4004 Strain Relief Fiber-glass reinforced PBT resin (UL94V-0)/black
FCN-367J024-AU/F *
FCN-367J040-AU/F
Housing Polyester resin (UL94V-0)/black
Contacts Mating end Copper alloy/gold plated
Press-fit end Copper alloy/tin plated
Connecting screw Steel/nickel plated
Cable UL2464 Interface Cable AWG28/Shielded
Crimp terminal Forked crimp terminal 1.25 Y AS 3.5 or the equivalent
XW2Z
6
Appearance and Wiring Diagrams
XW2Z-@@@A
(For XW2D-20G6/XW2B-20G@/-40G5-T/-20G5-D/
XW2C-20G5-IN16/20G6-IO16/XW2E-20G5-IN16/
XW2F-20G7-IN16/-OUT16/XW2N-20G8-IN16)
XW2Z-@@@B (For XW2D-40G6/XW2B-40G@)
For 32-point, Connector-type I/O Units for Programmable Controllers
For 32-point, Connector-type I/O Units (Group 2) for Programmable Controllers
For 64-point, Connector-type I/O Units for Programmable Controllers
FCN367J024-AU/F
(mating side) XG4M-2030-T
(mating side)
11
22
66
77
10 10
99
12 12
11 11
12 11
14 13
21
43
20 19
18 17
BA
Triangular
mark
NC
Wiring Diagram
FCN367J040-AU/F
(mating side) XG4M-4030-T
(mating side)
11
22
10 10
11 11
20 20
19 19
20 19
22 21
21
43
40 39
38 37
BA
Triangular
mark
Wiring Diagram
•Normal wiring
20 20
19 19
11 11
10 10
11
22
20 19
22 21
21
43
40 39
38 37
FCN367J040-AU/F
(mating side) XG4M-4030-T
(mating side)
AB
Triangular
mark
•Reverse wiring
XW2Z
7
XW2Z-@@@B-A (For XW2F-40G7-IN32)
XW2Z-@@@D
B20
B19
B18
B17
B16
B15
B14
B13
B12
B11
B10
B9
B8
B7
B6
B5
B4
B3
B2
B1
A20
A19
A18
A17
A16
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
1
2
3
5
7
9
11
13
15
17
19
4
6
8
10
12
14
16
18
20
21
22
23
25
27
29
31
33
35
37
39
24
26
28
30
32
34
36
38
40
FCN367J040-AU/F XG4M-4030-T
Wiring Diagram
For 32-point, Connector-type Input Units (Group 2) for Programmable Controllers
For 64-point, Connector-type Input Units for Programmable Controllers
B20
B19
B18
B17
B16
B15
B14
B13
B12
B11
B10
B9
B8
B7
B6
B5
B4
B3
B2
B1
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A20
A19
A18
A17
A16
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
FCN367J040-AU/F
CN1
XG4M-2030-T
CN3
XG4M-2030-T
CN2
11
17 17
18 18
20 19
18 17
16 15
43
21
19 19
20 20
22
88
99
10 10
11 11
Triangular mark
20 19
18 17
16 15
43
21
Triangular
mark
XG4M-2030-T
CN3
(mating side)
XG4M-2030-T
CN2
(mating side)
FCN367J040-AU/F
CN1
(mating side)
NC
NC
BA
NC
Wiring Diagram
Note: XW2Z-R Cables for I/O Relay Terminals have different wiring and
cannot be used with the XW2C.
XW2Z
8
XW2Z-@@@F
Connector Pin No. Table
XW2Z-@@@L
20-pole Cable with Discrete-wire Press-fit Terminals
19 20
17 18
34
12
XG4M-2030-T
(mating side)
Forked
terminals
(M3.5)
20
19
18
17
4
3
2
1
Triangular
mark
Wiring Diagram
Forked
terminal
No. of
cores
Insulation
color
Dot
marks
Dot
color
Connector
pin No.
11Blue@Red 1
2Blue@Black 2
32Pink @Red 3
4Pink@Black 4
53Green @Red 5
6Green@Black 6
74Orange @Red 7
8Orange @Black 8
95Gray @Red 9
10 Gray @Black 10
11 6Blue@@ Red 11
12 Blue@@ Black 12
13 7Pink @@ Red 13
14 Pink @@ Black 14
15 8Green @@ Red 15
16 Green @@ Black 16
17 9Orange @@ Red 17
18Orange @@ Black 18
19 10 Gray @@ Red 19
20 Gray @@ Black 20
For 32-point, Connector-type Output Units (Group 2) for Programmable Controllers
For 64-point, Connector-type Output Units for Programmable Controllers
B20
B19
B18
B17
B16
B15
B14
B13
B12
B11
B10
B9
B8
B7
B6
B5
B4
B3
B2
B1
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A20
A19
A18
A17
A16
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
FCN367J040-AU/F
CN1
XG4M-2030
CN3
XG4M-2030
CN2
Wiring Diagram
XW2Z
9
XW2Z-@@@H (For CS1-series I/O Unit Connection)
I/O Signal Tables
XW2Z-@@@H-@ Connecting Cables
XW2Z-@@@H-@G/XW2Z-R@@@C-@@@-@@@ Connecting Cables
Note: The XW2Z-@@@H-@G I/O signal arrangement is oriented the same as the XW2Z-R Cables for I/O Relay Terminals.
For 96-point, Connector-type I/O Units for Programmable Controllers
XW2Z-@@@H-3
XW2Z-@@@H-2
XW2Z-@@@H-1
XW2Z-R@@@C-@@@-@@@
XW2Z-@@@H-2G
XW2Z-@@@H-1G
XW2Z-@@@H-1 XW2Z-@@@H-2 XW2Z-@@@H-3
(Example Using CN1 on CS1W-OD291)
13579
11 13 15 17 19
2468
10 12 14 16 18 20
012 34567
COM
NC
8 9 10 11 12 13 14 15
+V
NC
13579
11 13 15 17 19
2468
10 12 14 16 18 20
012 34567
COM
NC
8 9 10 11 12 13 14 15
+V
NC
13579
11 13 15 17 19
2468
10 12 14 16 18 20
012 34567
COM
NC
8 9 10 11 12 13 14 15
+V
NC
Word N (CN2) Word N+1 (CN3) Word N+2 (CN4)
XW2@-20G@
13579
11 13 15 17 19
2468
10 12 14 16 18 20
012 34567
COM
NC
8 9 10 11 12 13 14 15
+V
NC
13579
11 13 15 17 21 23 25 27 29 31 33 35 37 3919
2468
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
012 34567
COM
NC
8 9 10 11 12 13 14 15
+V
NC
012 34567
COM
NC
8 9 10 11 12 13 14 15
+V
NC
Word N (CN2) Word N+1 (CN2) Word N+2 (CN3)
XW2@-40G@XW2@-20G@
13579
11 13 15 17 21 23 25 27 29 31 33 35 37 3919
2468
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
012 34567
COM COM
8 9 10 11 12 13 14 15
+V
012 34567 012 34567
COM
NC NC NC
8 9 10 11 12 13 14 15 8 9 10 11 12 13 14 15
+V +V
NC NC NC
41 43 45 47 49 51 53 55 57 59
42 44 46 48 50 52 54 56 58 60
Word N (CN2) Word N+1 (CN2) Word N+2 (CN2)
XW2B-60G@
13579
11 13 15 17 19
2468
10 12 14 16 18 20
15 14 13 12 11 10 9 8
COM
NC 765 43210
+V
NC 15 14 13 12 11 10 9 8
COM
NC 765 43210
+V
NC 15 14 13 12 11 10 9 8
COM
NC 765 43210
+V
NC
13579
11 13 15 17 19
2468
10 12 14 16 18 20
13579
11 13 15 17 19
2468
10 12 14 16 18 20
Word N (CN2) Word N+1 (CN3) Word N+2 (CN4)
XW2@-20G@
15 14 13 12 11 10 9 8
COM
NC 765 43210
COM
NC 765 43210
+V
NC 15 14 13 12 11 10 9 8
+V
NC 15 14 13 12 11 10 9 8
COM
NC 765 43210
+V
NC
13579
11 13 15 17 19
2468
10 12 14 16 18 20
13579
11 13 15 17 21 23 25 27 29 31 33 35 37 3919
2468
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Word N (CN2) Word N+ 1 (CN2) Word N +2 (CN3)
XW2@-40G@XW2@-20G@
15 14 13 12 11 10 9 8
COM
NC 765 43210
COM
NC 7 6 5 4 3 2 1 0
+V
NC 15 14 13 12 11 10 9 8
+V
NC
COM
NC 765 43210
15 14 13 12 11 10 9 8
+V
NC
13579
11 13 15 17 21 23 25 27 29 31 33 35 37 3919
2468
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
41 43 45 47 49 51 53 55 57 59
42 44 46 48 50 52 54 56 58 60
Word N (CN2) Word N+1 (CN2) Word N+2 (CN2)
XW2B-60G@
XW2Z
10
XW2Z-@@@KXW2Z-@@@N
XW2Z-@@@X
For 32-point, MIL Connector-type I/O Units for Programmable Controllers
XG4M-4030-T
(mating side)
XG4M-4030-T
(mating side)
Triangular mark
Triangular mark
21 22
19 20
39 40
37 38
12
34
20 19
22 21
21
43
40 39
38 37
Wiring Diagram
Note: Connector pins are connected 1-to-1 so
that pin numbers correspond.
XG4M-2030-T
CN2
(mating side)
XG4M-2030-T
CN3
(mating side)
Triangular mark
23 24
21 22
19 20
17 18
39 40
37 38
12
34
18 17
20 19
21
43
XG4M-4030-T
(mating side) Triangular mark
Triangular mark
18 17
20 19
21
43
Wiring Diagram
XG4M-2030-T
(mating side)
XG4M-2030-T
(mating side)
Triangular mark
Triangular mark
19 20
17 18
12
34
21
43
20 19
18 17
Wiring Diagram
Note: Connector pins are connected 1-to-1 so
that pin numbers correspond.
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2017.6
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2017 All Right Reserved.
