APM86491-SKB800T - M/A-COM Technology Solutions

Pin Diode Switch Element

Rev. V1

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

MEST2G-150-20-CM26

Features

 High Power Handling 150 W

 Low Insertion Loss:

0.25 dB @ 2 GHz

0.40 dB @ 6 GHz

 Medium Isolation:

21 dB @ 2 GHz

12 dB @ 6 GHz

 RoHS* Compliant

Description

The MEST2G-150-20-CM26 is a thermal to ground

series diode switch element (EST2G) in an

Aluminum Nitride package. This part is designed for

a reliable high power switch application up to 150

watts. Usable up to 10 GHz.

* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.

Electrical Specifications: TC = +25°C (unless otherwise specified)

Parameter Test Conditions Units Min. Typ. Max.

Breakdown Voltage (VBR) IR = 10 µA V 500 — —

Forward Voltage (VF) IF = 50 mA V — 1850 —

Series Resistance (RS) IF = 100 mA, 500 MHZ, 2 Diodes Ω — 1.8 —

Junction Capacitance (CJ) VR = 50 V, 1 MHz, 1 Diodes pF — 0.19 —

Lifetime (t) IF = 10 mA, IR = 6 mA, 50% ns — 1800 —

I-Region (w) I-Layer µm — 80 —

Input / Output Return Loss (I/ORL) IF = 100 mA, 2 GHz

IF = 100 mA, 6 GHz dB 25

15 —

Insertion Loss (IL) IF = 100 mA, 2 GHz

IF = 100 mA, 6 GHz dB — 0.25

0.40

0.60

Isolation (ISO) VR = 10 V, 2 GHz

VR = 10 V, 6 GHz dB 18

12 —

Pin Diode Switch Element

Rev. V1

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

MEST2G-150-20-CM26

Absolute Maximum Ratings1,2

Parameter Absolute Maximum

Breakdown Voltage (VR) 500 V

Forward Current (IFDC) 250 mA

Thermal Resistance (θJC) 8°C/W

Junction Temperature (TJ) -40°C to 175°C

Storage Temperature (TSTG) -55°C to +150°C

Mounting Temperature (TMTG) +260°C per

JEDEC STD-J-20C

1. Exceeding any one or combination of these limits may cause

permanent damage to this device.

2. MACOM does not recommend sustained operation near these

survivability limits.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

These electronic devices are sensitive to

electrostatic discharge (ESD) and can be damaged

by static electricity. Proper ESD control techniques

should be used when handling these Class 0 (HBM)

devices.

Insertion Loss Isolation

Input Return Loss Resistance vs. Bias Current,

500 MHz for 2 diodes in Series

Typical Performance Curves: TA = 25°C, ZO = 50 Ω, -10 dBm Small Signal

Pin Diode Switch Element

Rev. V1

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

MEST2G-150-20-CM26

Junction Temperature vs. Input Power

Mounted on Heat Sink @ TA = 25°C, 1.3 GHz

Outline (CM26)

Pin Diode Switch Element

Rev. V1

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

MEST2G-150-20-CM26

Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")

products. These materials are provided by MACOM as a service to its customers and may be used for

informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or

in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM

assumes no responsibility for errors or omissions in these materials. MACOM may make changes to

specifications and product descriptions at any time, without notice. MACOM makes no commitment to update

the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future

changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,

to any intellectual property rights is granted by this document.

THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR

INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR

OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY

OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN

THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,

WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.

MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM

customers using or selling MACOM products for use in such applications do so at their own risk and agree to

fully indemnify MACOM for any damages resulting from such improper use or sale.