DATA SHEET GaAs INTEGRATED CIRCUIT PG2009TB DESCRIPTION EOU T L-BAND HIGH POWER SPDT SWITCH The PG2009TB is an L-band SPDT (Single Pole Double Throw) GaAs FET switch which was developed for digital cellular or cordless telephone application. The device can operate from 500 MHz to 2.5 GHz, having the low insertion loss and high isolation by 2.8 V control voltage. * Low insertion loss * High isolation * High power : LINS = 0.25 dB TYP. @ Vcont1/2 = 2.8 V/0 V, f = 1.0 GHz o CG p-I 24 n R 09 ep M2 lac wi em th en Pin t: Ma pp ing FEATURES LINS = 0.30 dB TYP. @ Vcont1/2 = 2.8 V/0 V, f = 2.0 GHz : ISL = 28 dB TYP. @ Vcont1/2 = 2.8 V/0 V, f = 2.0 GHz : Pin (0.1dB) = 34 dBm TYP. @ Vcont1/2 = 2.8 V/0 V, f = 1.0 GHz * 6-pin super minimold package (2.0 x 1.25 x 0.9 mm) APPLICATION * L-band digital cellular or cordless telephone AS * BuletoothTM, W-LAN and WLL applications ORDERING INFORMATION Part Number PG2009TB-E3 Package Marking 6-pin super minimold G2U Supplying Form * Embossed tape 8 mm wide * Pin 1, 2, 3 face the perforation side of the tape * Qty 3 kpcs/reel PH Remark To order evaluation samples, contact your nearby sales office. Dr Part number for sample order: PG2009TB-A Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Document No. PG10191EJ02V0DS (2nd edition) Date Published July 2004 CP(K) The mark shows major revised points. PG2009TB PIN CONNECTIONS 1 4 4 3 5 5 2 6 6 1 Pin No. Pin Name 1 OUT1 2 GND 3 OUT2 ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified) Parameter Control Voltage 1, 2 Ratings Vcont1, 2 -6.0 to +6.0 Unit V Note Pin +36 dBm Ptot 0.15 W Operating Ambient Temperature TA -45 to +85 C Storage Temperature Tstg -55 to +150 C Total Power Dissipation Note Vcont1-Vcont2 6.0 V AS RECOMMENDED OPERATING RENGE (TA = +25C) Parameter Control Voltage (High) Symbol MIN. TYP. MAX. Unit Vcont(H) +2.7 +2.8 +3.0 V Vcont(L) -0.2 0 +0.2 V PH Control Voltage (Low) 2 Vcont2 5 IN 6 Vcont1 Dr o CG p-I 24 n R 09 ep M2 la c wi em th en Pin t: Ma p Input Power Symbol 4 pin g 2 (Bottom View) EOU T 3 G2U (Top View) Data Sheet PG10191EJ02V0DS PG2009TB Parameter Symbol TYP. MAX. Unit f = 0.5 to 1.0 GHz - 0.25 0.45 dB f = 2.0 GHz - 0.30 0.50 dB f = 2.5 GHz - 0.40 - dB f = 0.5 to 2.0 GHz 24 28 - dB f = 2.5 GHz - 25 RLin f = 0.5 to 2.5 GHz 15 20 RLout f = 0.5 to 2.5 GHz 15 20 32.5 34 LINS Isolation ISL Input Return Loss Output Return Loss Input Power at 0.1 dB 2nd Harmonics Pin(0.1 dB) f = 1.0 GHz, Vcont = 2.8 V/0 V - dB - dB - dB - dBm Dr o CG p-I 24 n R 09 ep M2 lac wi em th en Pin t: Ma p Compression Point Note Test Conditions EOU T Insertion Loss MIN. pin g ELECTRICAL CHARACTERISTICS (TA = +25C, Vcont1 = 2.8 V, Vcont2 = 0 V or Vcont1 = 0 V, Vcont2 = 2.8 V, ZO = 50 , Off chip DC blocking capacitors value; 56 pF, unless otherwise specified) 2f0 f = 1.0 GHz, Vcont = 2.8 V/0 V, 65 75 - dBc 65 75 - dBc - 150 - ns - 1 50 A Pin = 30.5 dBm 3rd Harmonics 3f0 f = 1.0 GHz, Vcont = 2.8 V/0 V, Pin = 30.5 dBm Switching Speed Control Current tSW Icont Vcont = 2.8 V/0 V, RF Non AS Note Pin(0.1 dB) are measured the input power level when the insertion loss increase more 0.1 than that of linear range. All other characteristics are measured in linear range. Caution When the PG2009TB is used it is necessary to use DC blocking capacitors for No.1 (OUT1), No.3 (OUT2) and No.5 (IN). The value of DC blocking capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with actual board of your system. PH The range of recommended DC blocking capacitor value is less than 100 pF. Data Sheet PG10191EJ02V0DS 3 PG2009TB EVALUATION CIRCUIT Vcont1 = 2.8 V, Vcont2 = 0 V or Vcont2 = 0 V, Vcont1 = 2.8 V, off chip DC blocking capacitors value C1 = 56 pF, C2 = 1 000 pF (Bypass), using the standard evaluation board. 5 IN C1 4 Vcont2 G2U 6 Vcont1 1 OUT1 2 3 C1 C2 EVALUATION BOARD C1 EOU T C2 OUT2 Vcont1 6pin SMM SPDT SW AS OUT1 C2 C1 G2U IN C1 C1 PH C2 OUT2 Vcont2 TRUTH TABLE 4 Vcont1 Vcont2 IN-OUT1 IN-OUT2 Low High OFF ON High Low ON OFF Data Sheet PG10191EJ02V0DS PG2009TB TYPICAL CHARACTERISTICS (TA = +25C, Vcont1/2 = 2.8 V/0 V, Pin = 0 dBm, OUT2 side is 50 termination, unless otherwise specified) ISOLATION vs. FEQUENCY INPUT RETURN LOSS vs. FREQUENCY 10 dB/ REF 0 dB 0 1 -20 2 -40 START 0.500 000 000 GHz CH1 S21 1: -25.43 dB 1.0 GHz 2: -30.339 dB 1.5 GHz 3: -30.025 dB 2.0 GHz 4: -23.812 dB 2.5 GHz 5: -17.85 dB 3.0 GHz 3 5 4 Isolation ISL (dB) log MAG log MAG 0 -20 2 -40 START 0.500 000 000 GHz STOP 3.000 000 000 GHz -4.0 1: -0.620 dB 1.0 GHz 2: -0.744 dB 1.5 GHz 3: -0.881 dB 2.0 GHz 4: -1.057 dB 2.5 GHz 5: -1.302 dB 3.0 GHz 2 START 0.500 000 000 GHz 3 4 5 STOP 3.000 000 000 GHz Output Return Loss RLout (dB) -2.0 1 4 5 STOP 3.000 000 000 GHz OUTPUT RETERN LOSS vs. FREQUENCY CH1 S22 AS Insertion Loss LINS (dB) 0 1 dB/ REF 0 dB 3 Frequency f (GHz) INSERTION LOSS vs. FREQUENCY log MAG 1: -28.787 dB 1.0 GHz 2: -28.871 dB 1.5 GHz 3: -27.75 dB 2.0 GHz 4: -24.902 dB 2.5 GHz 5: -21.582 dB 3.0 GHz 1 Frequency f (GHz) CH1 S21 10 dB/ REF 0 dB EOU T Input Return Loss RLin (dB) CH1 S11 log MAG 10 dB/ REF 0 dB 0 1: -25.992 dB 1.0 GHz 2: -31.882 dB 1.5 GHz 3: -32.46 dB 2.0 GHz 4: -25.087 dB 2.5 GHz 5: -18.145 dB 3.0 GHz 1 -20 2 -40 START 0.500 000 000 GHz Frequency f (GHz) 3 4 5 STOP 3.000 000 000 GHz Frequency f (GHz) PH Caution These characteristics values include the losses of the evaluation board. Remark The graphs indicate nominal characteristics. Data Sheet PG10191EJ02V0DS 5 PG2009TB TYPICAL CHARACTERISTICS (f = 2 GHz, OUT2 side is 50 termination, unless otherwise specified) Insersion Loss LINS (dB) 0.2 0.3 0.4 0.5 0.6 0.7 EOU T 0 0.1 RELATION BETWEEN CONTROL VOLTAGE OF INSERSION LOSS Vcont = 2.4 V Vcont = 2.8 V Vcont = 3.2 V 0.9 25 26 27 28 29 30 31 32 33 34 35 36 37 0.8 Input Power Pin (dBm) 20 30 40 Vcont = 2.4 V Vcont = 2.8 V Vcont = 3.2 V AS 2nd Harmonics 2f0 (dBc) 10 50 60 70 0 10 3rd Harmonics 3f0 (dBc) 0 RELATION BETWEEN CONTROL VOLTAGE OF 2nd HARMONICS 20 Vcont = 2.4 V Vcont = 2.8 V Vcont = 3.2 V 30 40 50 60 70 80 80 90 25 26 27 28 29 30 31 32 33 34 35 36 37 90 25 26 27 28 29 30 31 32 33 34 35 36 37 PH Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. 6 RELATION BETWEEN CONTROL VOLTAGE OF 3rd HARMONICS Data Sheet PG10191EJ02V0DS Input Power Pin (dBm) PG2009TB PACKAGE DIMENSIONS 6-PIN SUPER MINIMOLD (UNIT: mm) 2.10.1 0.2+0.1 -0.05 0.65 0.65 1.3 2.00.2 EOU T 1.250.1 0.15+0.1 -0.05 PH AS 0 to 0.1 0.7 0.90.1 0.1 MIN. Data Sheet PG10191EJ02V0DS 7 PG2009TB RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Peak temperature (package surface temperature) : 10 seconds or less Preheating time at 120 to 180C : 12030 seconds Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) : 3 times : 0.2%(Wt.) or below : 215C or below Preheating time at 120 to 150C : 30 to 60 seconds Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Maximum number of reflow processes Peak temperature (molten solder temperature) IR260 : 60 seconds or less Peak temperature (package surface temperature) Time at temperature of 200C or higher Wave Soldering : 260C or below Time at peak temperature Time at temperature of 220C or higher VPS Condition Symbol EOU T Infrared Reflow Soldering Conditions For soldering : 25 to 40 seconds VP215 : 3 times : 260C or below Time at peak temperature : 10 seconds or less Maximum number of flow processes : 1 time Peak temperature (pin temperature) : 350C or below Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below WS260 Preheating temperature (package surface temperature) : 120C or below Maximum chlorine content of rosin flux (% mass) Partial Heating Soldering time (per side of device) : 0.2%(Wt.) or below : 3 seconds or less PH AS Caution Do not use different soldering methods together (except for partial heating). 8 Data Sheet PG10191EJ02V0DS HS350 PG2009TB SAFETY INFORMATION ON THIS PRODUCT Caution GaAs Products The product contains gallium arsenide, GaAs. GaAs vapor and powder are hazardous to human health if inhaled or ingested. * Do not destroy or burn the product. * Do not cut or cleave off any part of the product. * Do not crush or chemically dissolve the product. * Do not put the product in the mouth. PH AS EOU T Follow related laws and ordinances for disposal. The product should be excluded from general industrial waste or household garbage. NOTICE Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by California Eastern Laboratories or Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by California Eastern Laboratories, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a California Eastern Laboratories sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories. 12. Please contact a California Eastern Laboratories sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. PH AS EOU T 1. NOTE 1: "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. NOTE 2: "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. NOTE 3: Products and product information are subject to change without notice. CEL Headquarters * 4590 Patrick Henry Drive, Santa Clara, CA 95054 * Phone (408) 919-2500 * www.cel.com For a complete list of sales offices, representatives and distributors, Please visit our website: www.cel.com/contactus Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: CEL: UPG2009TB-A UPG2009TB-E3-A UPC8163TB-EV19 UPG2009TB-EVAL-A