REV. Status REVISION 01/09/02 MP REVISION A CHANGED MARKING 05/09/02 MP REVISION B CHANGED A.3 05/28/02 MP PREPARED BY: ADSL Inductor co A. Electrical Specifications (@ 25C) ti] oO > vv 1. Primary Open Circuit Inductance; 90H +5% @ 10KHz, 0.1Vrms, 100mA DC 2 wt Measured (13) and (4-6) =! | 2. DC Resistance; (13)=1.09 MAX White dot S re 6)= ite do = (4-6)=1.00 MAX indicates 3. Turns Ratio; (13):(4-6)=1:1.00+1% pin 1 _ 4 4. Dielectric Strength; 630Vrms 1 second @ Wdg. to Wdg. Operating Temperature Range; 40C to +85C B. Marking; 4106, TAMURA and date code C. Schematic and Mounting Footprint; 13.720.25[0.540+0.010] 1 . . 6 2.54+0.25[0.100+0.010] t || || to 2.54+0.25[0.100+0.010] my 5 4 = a 1.30+0.10[0.051 0,004]. D. Mechanical Specifications; Suggested Pad Layout 9.40[0.370]MAX 7.62[0.300]MAX 8.90[0.350]MAX 0.25[0.010]TYP Lj UA | L 0.70[0.028]TYP 13.46[0.530]MAX D. Rund ENGINEER: DWG CONTROL NO.| REV ADSL PA112895 M. Pitchai acap\TTc\a1128951.0Wws | B INDUCTOR TTC 41 O6 QUALITY CONTROL: CONTENTS OF THIS DRAWING ARE TAMURA CORPORATION OF AMERICA MODEL SPECIFICATION D. Kelley PRIOR NOTICE 43352 ASIN 8 PARK DANE, Nea SeOaE Oot DIM: mm(In} SCL: 3/1 | SH: 10F 1 APPROVED: PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH TAMURA J. Coleman RETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, REPRODUCTION, MANUFACTURE AND SALE. THIS DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING.