CLIPPER
Characteristics
Mechanical
• Monobloc shell and insulator in
thermoplastic* material self-extinguishing
to UL 94 VO
• 180° screw coupling with positive audible
safety latch
• Scoop proof
• Copper alloy contacts, machined or
stamped and formed :
- plating : gold flash on active part
• Mechanical endurance :
- connector : 250 cycles mating /
unmating
- retention plate : 50 cycles mating /
unmating
• Retention force :
- Ø 1 mm →70 N
- Ø 1.6 mm →90 N
• Vibration :
- frequency range : 10-2000 Hz, 20 g
- 10 cycles in accordance with CEI 68-2-6
*Composite version are under development.
Consult FCI.
Electrical
• Withstand voltage : 1500 Vrms min or in
accordance with DIN 57110b
• Contact resistance < 10 mΩ
• Current rating per contact :
- machined contacts :
Ø 1 mm (7 A), Ø 1.6 mm (13 A)
- stamped and formed contacts :
Ø 1 mm (5 A), Ø 1.6 mm (10 A)
Climatic
• Working temperature :
-40°C to +125°C
• Sealing
examples :
- connector + sealing gland : IP68
- connector + grommet : IP67
• Resistance to salt spray :
- 48 h min
-> 1000 h (sealed mated connectors)
Resistance to fluids
- oil,
- petrol, fuel,
- lubricants
- other fluids : consult FCI
Applications
• Machines / Robotics
• Process control
• Instrumentation
• Railways
1
Retention plate principle
Locked, the retention plate holds
the contacts firmly in position
Unlocked, the retention plate allows
the insertion/extraction of contacts without tooling
Unlocked
plate
Locked
plate
Standards
Description
• Plastic low cost connector
• A retention plate system allowing
insertion/extraction of the contacts
without the need for tooling
• A high sealing level up to IP68
• Facilities to use trade backshells with
the electrical thread adaptor (PG)
Styles available
2
CLIPPER
Plug
In line-receptacle
Backnut
Adaptor
Elbow backshell with sealing gland
Straight cable clamp
Sealing gland backshell with
anti-decoupling system
Straight backshell for
flexible conduit systems
Square flange receptacle
3
CLIPPER
Class 2 - VDE 380 V
CL1M1100 CL1R1100 CL1R1101 CL1R1102
CL1R2102
CL1R3102
CL1R4202
CL1R2101
CL1R3101
CL1R4201
CL1M1101 CL1M1102 CL1C1100 CL1C1101
CL1C1201
CL1C2101
CL1C2201
CL1C3101
CL1C3201
CL1C4101
CL1C4201
CL1C1200
CL1C2100
CL1C2200
CL1C3100
CL1C3200
CL1C4100
CL1C4200
CL1M1202
CL1M2102
CL1M2202
CL1M3102
CL1M3202
CL1M4102
CL1M4202
CL1M1201
CL1M2101
CL1M2201
CL1M3101
CL1M3201
CL1M4101
CL1M4201
CL1R2100
CL1R3100
CL1R4200
CL1M1200
CL1M2100
CL1M2200
CL1M3100
CL1M3200
CL1M4100
CL1M4200
Receptacle
types without
contacts
Contacts
layouts
Unsealed receptacle
(without o’ring)
for
male
contacts
for
female
contacts
for
male
contacts
for
female
contacts
for
male
contacts
for
female
contacts
unsealed
for male
contacts
sealed
for male
contacts
Sealed receptacle
(with o’ring)
for use with
backshell
Sealed receptacle
(with o’ring and
panel gasket)
In-line
receptacle
Shell sizes
1
2
3
4
4 cts
Ø 1.6 mm
9 cts
Ø 1 mm
Class 2 - VDE 250 V
9 cts
Ø 1.6 mm
14 cts
Ø 1 mm
Class 2 - VDE 250 V
18 cts
Ø 1.6 mm
31 cts
Ø 1 mm
Class 2 - VDE 250 V
26 cts
Ø 1.6 mm
40 cts
Ø 1.6 mm
Square flange receptacle and in-line receptacle
Part numbers
4
CLIPPER
Grommet
Thrust ring
O ring
Class 2 - VDE 380 V
CL1P1100 CL1F1100
CL1F1200
CL1F1101
(IP67)
CL1F1103
(IP68)
CL1F1201
(IP67)
CL1F1203
(IP68)
CL111101
CL111201
CL112101
CL113101
CL114101
CL114201
CL1F2101
(IP67)
CL1F2103
(IP68)
CL1F2201
(IP67)
CL1F2203
(IP68)
CL1F3101
(IP67)
CL1F3103
(IP68)
CL1F3201
(IP67)
CL1F3203
(IP68)
CL1F4101
(IP67)
CL1F4103
(IP68)
CL1F4201
(IP67)
CL1F4203
(IP68)
CL1P1101 CL111102
CL111000
CL112000
CL113000
CL114000
CL111202
CL112102
CL113102
CL114102
CL114202
CL1P2101
CL1P3101
CL1P4201
CL1F2100
CL1F2200
CL1F3100
CL1F3200
CL1F4100
CL1F4200
CL1P2100
CL1P3100
CL1P4200
Plug types
without
contacts
Contact
layouts
Unsealed plug
(without o’ring
and mating seal)
for
male
contacts
for
female
contacts
for
male
contacts
for
female
contacts
for
male
contacts
for
female
contacts
for male
and female contacts
Sealed plug
(with o’ring
and mating seal)
Backnut
sealed
Backnut
unsealed
Shell sizes
1
2
3
4
4 cts
Ø 1.6 mm
9 cts
Ø 1 mm
Class 2 - VDE 250 V
9 cts
Ø 1.6 mm
14 cts
Ø 1 mm
Class 2 - VDE 250 V
18 cts
Ø 1.6 mm
31 cts
Ø 1 mm
Class 2 - VDE 380 V
26 cts
Ø 1.6 mm
40 cts
Ø 1.6 mm
Plug and backnut
Part numbers
CLIPPER
5
Adaptor and electrical thread backshells (PG)
Unsealed
S
ealed
Type
Description
1 2 3 4
(PG 13.5) (PG 16) (PG 21) (PG 29) (PG 36)
Adaptor
Straight
backshell
for flexible
conduit
systems
Straight
cable
clamp
CL101000
CL101040 CL102040
CL102030 CL103030 -
CL103040 CL104040
CL101030
CL102000 CL104000
CL103000
CL124030
CL124040
CL124000
Elbow
backshell
with sealing
gland
IP67
Anti-
decoupling
sealing
gland
backshell
IP68
Straight
backshell
for flexible
conduit
systems
IP67
CL101051
CL101021 CL102021 CL103021 CL124021 CL104021
CL102041 CL103041 CL124041 CL104041
CL101041
CL102051 -
CL103051 CL124051
Note : Electrical thread backshells are always supplied complete with the adaptor.
Part numbers
Shell sizes
6
CLIPPER
Accessories
Panel gasket (for square flange receptacle)
Elbow adaptors for receptacles
Dust cap for receptacle IP67
Tailles
de
boîtier
A
21.4
24.6
28.5
36.5
B
24.5
28.0
30.5
39.4
C
38.7
39.7
42.8
49.5
D
3.2
3.2
3.8
3.8
E
29.2
30.8
35.6
47.5
Dim.
(mm)
Shell
sizes
1
2
3
4
Shell Part numbers
1 CL141001
2 CL142001
3 CL143001
4 CL144001
Shell sizes 1 2 3 4
Part numbers
CL191001 CL192001 CL193001 CL194001
Elbow adaptors for receptacles
Shell 1 to 4
Shell
Part numbers
Sealed Unsealed
1 CL131001 CL131000
2 CL132001 CL132000
3 CL133001 CL133000
4 CL134001 CL134000
7
CLIPPER
Plating RF : gold flash on active part for standard version.
Stamped and formed contacts
Contact types ∅Wire insul. Cable
with insulation support (mm) diameter acceptance
∅(mm) (mm2)
male 2.00 min.
3.00 Max.
2.00 min.
3.00 Max.
female
1.6
0.70 to 1.50
0.70 to 1.50
0.70 to 1.50
0.70 to 1.50
1.6
male
female
CF16PC10RF
Part numbers
CF16SC10RF
CF16PC19RF
CF16SC19RF
Packaging
Bulk
Reel 5000 pieces
male 1.20 min.
2.10 Max.
1.20 min.
2.10 Max.
female
female
1
0.35 to 0.60
0.35 to 0.60
0.35 to 0.60
0.35 to 0.60
1
male
CF10PC10RF
CF10SC10RF
CF10PC19RF
CF10SC19RF
Bulk
Reel 5000 pieces
For other platings, consult FCI.
Part number : 8500 479 CL
Filler plug ∅1.6 mm
(for un-used contact cavities)
8
CLIPPER
Machined contacts
Contact types ∅Wire insul. Cable
(mm) diameter acceptance
∅(mm) (mm2)
male 2.00 min.
3.00 Max.
2.00 min.
3.00 Max.
female
1.6
0.93 to 1.91
0.6 *
0.93 to 1.91
0.6 *
1.91 Max.
1.91 Max.
1.6
male
female
Part numbers
CM16PC10MQ
CM16PC20MQ
CM16SC10MQ
CM16SC20MQ
CM16PS10MQ
CM16SS10MQ
* Delivered with reducing sleeve Plating MQ : 0.4 µmin gold on active part for standard version
Packaging
Bulk
Bulk
crimp
solder
male 1.20 min.
2.10 Max.
1.20 min.
2.10 Max.
female
1
0.21 to 0.93
0.06 to 0.21*
0.21 to 0.93
0.06 to 0.21*
0.93 Max.
0.93 Max.
1
male
female
CM10PC10MQ
CM10PC20MQ
CM10SC10MQ
CM10SC20MQ
CM10PS10MQ
CM10SS10MQ
Bulk
Bulk
crimp
solder
Part number : 8500 479 CL
Extended ground contact-crimp (+ 1 mm)
For other platings, consult FCI.
Bulk
male 1.6 2.00 min.
3.00 Max. 0.93 to 1.91
8501 9641
Filler plug ∅1.6 mm
(for un-used contact cavities)
9
CLIPPER
Dimensions
Square flange receptacle Plug
1
42.4
21.0
18.0
4.0
20.5
29.7
21.1
23.3
3.2
2
42.4
24.5
18.0
4.0
24.0
31.3
24.3
24.9
3.2
3
42.4
29.0
18.0
4.0
28.5
36.0
28.3
29.7
3.8
4
42.4
40.5
18.0
4.0
40.0
47.9
36.2
40.0
3.8
Tailles
de
boîtier
1
20.20
29.10
20.50
38.60
2
20.20
32.50
24.00
39.60
3
20.20
37.10
28.50
39.60
4
20.20
48.80
40.00
39.60
Dim.
(mm)
Shell
sizes
Shell
sizes
Dim.
(mm)
A
B
C
D
A
B
C
D
E
F
G
H
min.
Max.
10
CLIPPER
Mated and unmated connectors with backshells
LD
LV
A
B
ADAPTOR
BACKNUT
C
STRAIGHT CABLE CLAMP
D
J
STRAIGHT BACKSHELL FOR CONDUIT SYSTEM
F
SEALING GLAND BACKSHELL WITH ANTI-DECOUPLING SYSTEM
G
ELBOW BACKSHELL WITH SEALING GLAND
K
L
R
N
Q
Shell
Cotes
LDA
LVA
LDB
LVB
LDC
LVC
LDD
LVD
LDF
LVF
LDG
LVG
R
Max.
1
51
58.2
46
53
68
75.5
86.5
94
80
87
84
91
57
2
53.2
59.2
47
53
72.5
78.5
89
95
83
89
88
94
59.5
3
53.2
59.2
47
53
77
83
92
98
85
91
96
102
73
(PG 29)
55.2
61.2
-
-
86.5
91.5
94
100
95
101
109
115
91
(PG 36)
55.2
61.2
47
53
-
-
108
113.5
102
108
-
-
-
dimensions
Dim.
(mm)
* For other needs, consult FCI.
Shell
Cotes
J
Conduit L
Pmaflex
K
Max.
N
Q
1
6/14
17
16
6/12
6/12
2
6/16
17
16
10/14
10/14
3
8/21
23
21,5
13/18
13/18
(PG 29)
10/28
29
27,5
18/25
18/25
(PG 36)
36
36
22/32
-
cable acceptance *
Dim.
(mm)
4
4
11
CLIPPER
Panel cut-out
Crimping tools *
Interchangeability with MIL-C-5015
Panel mounting
Tailles
de
boîtiers
H
J
G
1
21.5
21.4
3.2
2
25
24.6
3.2
3
31
28.6
3.8
4
41
36.5
3.8
Ø H
J
J
4 holes ØG
CLIPPER MIL-C-5015
Shell 1 Shell 14
Shell 2 Shell 16
Shell 3 Shell 20
Shell 4 Shell 28
Machined contacts
(∅ 1 mm - ∅ 1.6 mm)
Stamped and formed
contacts (∅ 1 mm - ∅ 1.6 mm)
8465 Y16SCM-CL3
8365
with
locator
8365-02
Shell
sizes
Dim.
(mm)
* Other manual or semi-automatical crimping tool available, consult FCI.
See wiring instructions.
12
CLIPPER
General technical informations
Degree of protection in accordance with CEI 529, DIN 40050, NF EN 60529
First index Second index Third index
Protection against accidental or
inadvertent contact. Prot. against
ingress of foreign bodies.
Test
No protection
IP0
Index
0
1
Ball Ø 50 mm
Protection against contact with any large
area by hand, protect. against large
solid foreign bodies with Ø > 50 mm.
Ball Ø 12.5 mm
2
Protection against contact with the fingers,
prot. against solid foreign bodies with Ø 12,5 mm
IP2
IP1
Test
finger
IP3
IP4
IP5
Protection against tools wires or similar
objects with Ø > 2,5 mm, prot. against
small foreign solid bodies with Ø > 2,5 mm
Protection against tools wires or similar
objects with Ø > 1 mm, prot. against
small foreign solid bodies with Ø > 1 mm
3
4
5
Steel wire
Ø 2,5 mm
Steel wire
Ø 1 mm
Total protection against accid. or inadv.
contact. Protection against of dust.
Talc
Full protection against accid. or
inadv. contact. Prot. against interior
injurious dust deposits.
IP6
6
Protection against ingress of water Protection against mechanical
strength
0
IP x 0
No protection
Protection against vertical drop water
drips.
1
3Protection against diagonal drop water
drips (up to < of 60° out of vertical)
Protection against diagonal drop water
drips (up to < of 15° of vertical)
2
4Protection against splash water from
all directions
IP x 1IP x 2
IP x 4
IP x 3
± 15°
5Protection against water
(out of a nozzle)
from all directions
6Proof against
temporary flooding
7Protection against
water plunging
Proof against
temporary
water plunging
IP x 5
IP x 6
8
W
Proof against water pressure
Test
No protection
Troisième
chiffre
0
1
3
5
7
9
Impact strength : 0,225 J
250 g
15 cm
IP xx 1
IP xx 3
IP xx 5
IP xx 7
IP xx 9
Impact strength : 0,5 J
250 g
20 cm
Impact strength : 2 J
500 g
40 cm
Impact strength : 6 J
1,5 kg
40 cm
Impact strength : 20 J
5 kg
40 cm
Water tight
IP x 7
EXAMPLE : IP66-5 means: - Total protection against dust
- Proof against temporary flooding
- Proof against impact strength of 2 Joule
