Document 459 Flyback Transformers For Texas Instruments LM5070 PoE Interface - 3 Watt * Flyback transformers for 3 W PoE applications * Designed to operate in continuous mode at 250 kHz with an input of 36 - 72 Vdc * 1500 Vrms isolation from primary and bias to secondary Core material Ferrite Terminations RoHS tin-silver over tin over nickel over phos bronze. Other terminations available at additional cost. Weight 2.05 g Ambient temperature -40C to +85C Storage temperature Component: -40C to +85C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 350 per 13 reel Plastic tape: 32 mm wide, 0.42 mm thick, 20 mm pocket spacing, 9.16 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf Inductance Inductance Part at 0 A2 at Ipk3 1 number 10% (H) min (H) C1590-AL_ 310 279 C1591-AL_ 310 279 C1592-AL_ 310 279 Leakage 6 DCR max (Ohms)4 inductance5 Turns ratio pri bias sec max (H) pri : sec pri : bias 1.02 2.01 0.066 4.75 1 : 0.19 1 : 0.70 1.02 2.01 0.118 4.50 1 : 0.28 1 : 0.70 1.04 2.01 0.700 4.25 1 : 0.70 1 : 0.70 1. When ordering, please specify packaging code: Packaging: C1592-ALD D = 13 machine-ready reel. EIA-481 embossed plastic tape (350 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. Dot above pin1 Ipk3 (A) Output7 0.3 3.3 V, 0.91 A 0.3 5.0 V, 0.6 A 0.3 12 V, 0.25 A 2. 3. 4. 5. Inductance is for the primary, measured at 10 kHz, 0.1 Vrms, 0 Adc. Ipk is peak primary current drawn at minimum input voltage. DCR for the secondary is per winding. Leakage inductance measured between pins 3 and 4 with all other pins shorted. 6. Turns ratio is with the secondary windings connected in parallel. 7. Output of the secondary is with the windings connected in parallel. Bias winding output is 12 V, 20 mA. 8. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. 0.355 max 9,02 0.004 /0,10 0.041 1,05 0.520 max 13,21 3 0.339 8,60 1 0.028 0,70 8 Recommended Land Pattern 0.080 2,03 0.370 9,40 Pri 0.050 1,27 4 2 Sec 7 8 Bias 0.430 max 10,92 4 6 5 0.098 2,50 5 1 0.098 2,50 US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg 1 Secondary windings to be connected in parallel on the PC board Document 459 Revised 10/29/08 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: C1590-ALB C1591-ALB C1590-ALD C1592-ALB C1591-ALD C1592-ALD