05177 DALC112S1 Only One Name Means ProTek'TionTM ultra low capacitance steering diode array Description The DALC112S1 is a low capacitance and low leakage steering diode array capable of protecting up to six (6) high speed data lines. Its ultra low capacitance allows maintenance of signal integrity for high-speed data lines while protecting the circuit ICs from the damage of severe transients. An extremely low leakage current makes the DALC112S1 suitable for battery powered devices. The DALC112S1 is available in a SO-8 package. This device meets all the applicable voltage immunity standards, including IEC 61000-4-2 (ESD), 61000-4-4 (EFT) and 61000-4-5 (Surge). SO-8 package Features applications * Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV * Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns * Compatible with IEC 61000-4-5 (Surge): 12A, 8/20s - Level 1(LineGnd) & Level 2(Line-Line) * Low Clamping Voltage * Provides Six Lines of Protection * Low Leakage Current: <200nA * Ultra Low Capacitance: 5pF Typical * RoHS Compliant * REACH Compliant * * * * Ethernet 10/100/1000 Base T SMART Phones USB & FireWire Portable Electronics Mechanical characteristics * Molded JEDEC SO-8 Package * Approximate Weight: 70 milligrams * Lead-Free Pure-Tin Plating (Annealed) * Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C * 12mm Tape and Reel Per EIA Standard 481 * Flammability Rating UL 94V-0 PIN CONFIGURATION 05177.R4 9/10 8 7 6 5 1 2 3 4 Page 1 www.protekdevices.com 05177 DALC112S1 Only One Name Means ProTek'TionTM typical device characteristics MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS TA -55 to 150 C Storage Temperature TSTG -55 to 150 C Continuous Power Dissipation PPC 145 mW Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified PART NUMBER DALC112S1 DEVICE MARKING REPETITIVE PEAK REVERSE VOLTAGE PSC typical forward voltage MAXIMUM peak pulse forward CURRENT MAXIMUM REVERSE LEAKAGE CURRENT MAXIMUM quiescent supply CURRENT typical CAPACITANCE VRRM VOLTS @ 50mA VF VOLTS @ 8/20s I FM Amps VRRM @ 18v IR nA @ 20v IRq nA 0V, 1MHz Cj pF 20 1.3 12 20 200 5 figure 1 pulse wave form IPP - Peak Pulse Current - % of IPP 120 100 TEST WAVEFORM PARAMETERS tf = 8s td = 20s Peak Value IPP 80 e-t 60 40 td = t/(IPP/2) 20 0 05177.R4 9/10 tf 0 5 10 15 t - Time - s Page 2 20 25 30 www.protekdevices.com 05177 DALC112S1 Only One Name Means ProTek'TionTM typical device characteristics figure 2 non-repetitive peak pulse current capability Peak Pulse Current - Amps 8 6 4 2 0 0.001 0.01 10 100 figure 3 TYPICAL LOW CURRENT FORWARD VOLTAGE DROP 200 Forward Current - mA 0.1 1 Square Wave Pulse - ms TA = 25C Single Pulse See Figure 1 160 120 80 40 0 600 800 1000 1200 Forward Voltage Drop - mV figure 4 low forward current vs forward voltage 5 TA = 25C Single Pulse See Figure 1 Forward Current - A 4 3 2 1 0 0 1 2 3 Forward Voltage Drop - V 05177.R4 9/10 Page 3 www.protekdevices.com 05177 DALC112S1 Only One Name Means ProTek'TionTM SO-8 package information outline dimensions dim millimeters -A- inches min max min max A 4.80 5.00 0.189 0.196 B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.054 0.068 D 0.35 0.49 0.014 0.019 F 0.40 1.25 0.016 0.049 G 1.27 BSC 8 5 -B- 1 G 4 D 0.18 0.25 0.007 0.009 K 0.10 0.25 0.004 0.008 P 5.80 6.20 0.229 0.244 R 0.25 0.50 0.010 0.019 R x 45 C 0.05 BSC J + 0.010" (0.25mm) M B M 4 PL P 0 - 10 -T- K + 0.010" (0.25mm) M T B S A S 8 PL J F NOTES 1. 2. 3. 4. 5. 6. -T- = Seating plane and datum surface. Dimensions "A" and "B" are datum. Dimensions "A" and "B" do not include mold protrusion. Maximum mold protrusion is 0.015" (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. A pad layout dimensions dim millimeters B inches min max min max A 1.14 1.40 0.045 0.055 B 0.64 0.89 0.025 0.035 C 6.22 - 0.245 - D 3.94 4.17 0.155 0.165 E 1.02 1.27 0.040 0.050 NOTES 1. Controlling dimension: inches. 05177.R4 9/10 D C E Page 4 www.protekdevices.com 05177 DALC112S1 Only One Name Means ProTek'TionTM TAPE AND REEL P0 D t 10 Pitches Cumulative Tolerance on tape 0.2 P2 Pin 1 E F W K0 B0 A0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7") 12mm A0 B0 K0 D E F W P0 P2 P tmax 6.50 0.10 5.40 0.10 2.00 0.10 1.50 0.10 1.75 0.10 5.50 0.05 12.00 0.30 4.00 0.12 2.00 0.10 4.00 0.10 0.25 Notes 1. 2. 3. 4. 5. 6. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7" Reel - 1,000 pieces per 12mm tape. Suffix - T13 = 13" Reel - 2,500 pieces per 12mm tape. Bulk product shipped in tubes of 98 pieces per tube. Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package. Package outline, pad layout and tape specifications per document number 06011.R4 8/10. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty DALC112S1 -LF -T7 1,000 7" 98 DALC112S1 -LF -T13 2,500 13" 98 05177.R4 9/10 Page 5 www.protekdevices.com 05177 DALC112S1 Only One Name Means ProTek'TionTM company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT (c) ProTek Devices 2002 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05177.R4 9/10 Page 6 www.protekdevices.com