Features
■ Formerly brand
■ Extremely low capacitance
■ Very high bandwidth
■ Small package, minimal PCB area
■ RoHS compliant*
Applications
■ GR-1089
■ ITU K.20 and K.21
■ ADSL2+ and VDSL2 linecards
■ LAN, WAN equipment
FVC Series Voltage Control Devices
*RoHS COMPLIANT
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex.
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications
Voltage Control
Bourns® voltage control devices are used with high-speed series protectors to protect sensitive circuits from electrical disturbances
caused by lightning-induced surges, inductive-coupled spikes, and AC power cross conditions. The unique structure and character-
istics of the device are used to create an overvoltage protection device with precise and repeatable turn-on characteristics with low
voltage overshoot and high surge current capabilities.
Specifi cations
Part Number
Surge Rating Electrical Characteristics
IPP
(A)
VDRM
(V)
VS
(V)
VT
(V)
IDRM
(µA)
IS
(mA)
IT
(A)
IH
(mA)
CO
(pF)
FVC2300 4 190 260 3 5 400 1 150 6
FVC3100 4 275 350 3 5 400 1 150 6
IPP (peak pulse current) - maximum rated peak impulse current with
1.2/50 µs waveform
VDRM (peak off-state voltage) - maximum voltage that can be applied
while maintaining off state measured at IDRM
VS (switching voltage) - maximum voltage prior to switching to on-state
measured at 100 V/µs
VT (on-state voltage) - maximum voltage measured at rated on-state
current
IDRM (leakage current) - maximum peak off-state current measured at
VDRM
IS (switching current) - maximum current required to switch to on state
IT (on-state current) - maximum rated continuous on-state current
IH (holding current) - minimum current required to maintain on state
CO (off-state capacitance) - typical off-state capacitance measured at 1
MHz with a 2 V bias
+l
+V-V
IT
IS
IH
IDRM
VDRM
VT
VS
-l
General Notes:
• All measurements are at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C.
• IPP is a repetitive surge rating and is designed to be maintained for the life of the product.
• The devices are bidirectional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.
Typical Performance Characteristics
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications
Product Dimensions
FVC Series Voltage Control Devices
D
B
C
H
F
E
G
A
Dim. Minimum Maximum
A 2.29
(0.090)
3.00
(0.118)
B 4.50
(0.177)
5.40
(0.213)
C 1.25
(0.050)
1.65
(0.065)
D 3.90
(0.154)
4.65
(0.183)
E 0.76
(0.030)
1.52
(0.060)
F 0.15
(0.006)
0.30
(0.012)
G — 0.20
(0.008)
H 1.95
(0.077)
2.24
(0.088)
DIMENSIONS: MM
(INCHES)
Typical Part MarkingHow to Order
FVC3100 - BK
Part Number
• FVC2300
• FVC3100
Packaging Indicator
BK = Packaged in tape and reel (1500 pieces per reel) XXXX
YYYY
MARKING NUMBER
V31A = FVC3100
V23A = FVC2300
MANUFACTURER’S
TRADEMARK*
*TRANSITION FROM FULTEC TRADEMARK
TO BOURNS TRADEMARK IN 2009.
MANUFACTURING DATE CODE
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications
FVC Series Voltage Control Devices
Packaging Specifi cations
DIMENSIONS: MM
(INCHES)
D
D2
D1
W1
0.10
(0.004)
EMBOSSED CARRIER TAPE
TOP COVER TAPE THICKNESS (t1)
MAX.
EMBOSSED CAVITY
Symbol Dim.
A0 2.72± 0.10
(0.109 ± 0.004)
B0 5.25± 0.10
(0.210 ± 0.004)
d 1.55± 0.05
(0.061 ± 0.002)
D 330.0
(13.0)
D1 50.0 MIN.
(1.969)--------
D2 13.50 ± 1.0
(0.531 ± 0.039)
E 1.75 ± 0.10
(0.069 ± 0.004)
F 5.50 ± 0.05
(0.217 ± 0.002)
K0 2.66 MAX.
(0.105)--------0
P 4.00 ± 0.10
(0.157 ± 0.004)
P0 4.00 ± 0.10
(0.157 ± 0.004)
P1 2.00 ± 0.05
(0.079 ± 0.002)
t 0.60 MAX.
(0.024)--------.
W 12.00 ± 0.30
(0.472 ± 0.012)
W1 18.4 MAX.
(0.724)--------.
E
P
Ao
t
P1Po d
WBo
Ko
F
SEE NOTE 2 SEE NOTE 1
STARTEND
Asia-Pacifi c: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116
Europe: Tel: +41-41 768 5555 • Fax: +41-41 768 5510
The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700
www.bourns.com
COPYRIGHT©2009, BOURNS, INC. LITHO IN U.S.A. e 01/09 FU0903
01/09
