EMC TECHNOLOGY CAGE CODE # 24602 DWG # 1011885000
8851 SW OLD KANSAS AVE. CHANGE NOTICE EN 10-1208 REV LVL E
STUART, FL 34997 SHEET 1 OF 2
TITLE: SPECIFICATION CONTROL DRAWING
PART IDENTIFIER: HRW0X0XN0XWB2
X-TEMPERATURE COEFFICIENT OF ATTENUATION 1 X 10-3 DB/DB/°C.
N-ATTENUATION SHIFT NEGATIVE
X-TEST CODE: A=GROUP A; B=GROUP B; C=GROUPC
X DB VALUE SEE TABLE BELOW
SINGLE LOT AND DATE CODE AVAILABLE UPON REQUEST.
DESCRIPTION: WIDEBAND TEMPERATURE VARIABLE CHIP ATTENUATOR WITH HIGH RELIABILITY TESTING.
ASSEMBLY DWG: N/A
1.0 SPECIFICATIONS:
1.1 ELECTRICAL:
1.1.1 IMPEDANCE: 50 OHMS NOMINAL
1.1.2 OPERATING FREQUENCY RANGE: DC - 20GHZ.
1.1.3 ATTENUATION VALUE: SEE TABLE ABOVE
1.1.4 ATTENUATION ACCURACY AT 25°C: ±0.5DB.
1.1.5 VSWR DC- 10GHZ 1.25:1 MAX 10-20GHZ 1.45:1 MAX AT 25°C.
1.1.6 INPUT POWER: 0.2 WATTS CW.
1.1.6.1 FULL RATED POWER TO 125°C, DERATED LINEARLY TO 0 WATTS AT 150°C.
1.1.7 TEMPERATURE COEFFICIENT OVER OPERATING TEMPERATURE RANGE:
SEE TABLE ABOVE, TEMPERATURE COEFFICIENT TOLERANCE: ±0.001 DB/DB/°C.
1.2 MECHANICAL:
1.2.1 OUTLINE DWG: SEE SHEET 2.
1.2.2 WORKMANSHIP: PER MIL-PRF-55342.
1.3 ENVIRONMENTAL:
1.3.1 OPERATING TEMPERATURE RANGE: -55°C TO +125°C.
2.0 UNIT MARKING: NONE.
3.0 QUALITY ASSURANCE:
3.1 VERIFY 100% VISUAL PRE-CAP INSPECTION PERFORMED PER TP-9030.
3.2 PERFORM GROUP A, B AND/OR C TESTING AS INDICATED BY THE PART NUMBER PER TP-9030.
3.3 TEST DATA REQUIREMENTS:
3.3.1 TEST DATA REQUIRED FOR CUSTOMER - SEE PARAGRAPH 5.0 OF TP-9030.
3.3.2 DATA RETENTION - 24 MONTHS.
3.3.3 TEST SAMPLES REQUIRED FOR CUSTOMER - SEE PARAGRAPH 5.0 OF TP-9030.
4.0 PACKAGING: STANDARD PACK PER 755W002. (SERIALIZED WAFFLE PACK)
SHIFT
(NEG) DB VALUE
-.007 2, 3, 4, 5, 6
-.006 2, 3, 4, 5, 6
-.005 2, 3, 4, 5, 6
-.004 2, 3, 4, 5, 6
-.003 2, 3, 4, 5, 6
