Philips Components Metallized Polycarbonate film capacitors MKC RADIAL POTTED CAPACITORS Product specification MKC 344 PITCH 10/15/22.5/27.5 mm L \ | \ | , oO OPotT .,, |Oto o P= 10mm P= 15mm l } to 27.5mm { y Fig.1 Simplified outlines. FEATURES QUICK REFERENCE DATA e 10 to 27.5 mm lead pitch DESCRIPTION VALUE * Small dimensions for high density _| Capacitance range (E12 series) 0.010 to 6.8 LF packaging Supplied loose in box and on tape. APPLICATIONS e In electronic circuits for blocking and coupling, bypass and energy reservoir applications. 1996 Oct 21 Capacitance tolerance 410%; 45% Rated voitage (DC) 100 V; 250 V; 400 V; 630V Climatic category 55/100/56 Rated temperature 85 C Maximum application temperature 100 C Tangent of loss angle at 10 kHz 20x 104 Reference specification IEC 384-6 Performance grade grade 1 (long life) 263Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 MKC 344 GENERAL DATA PITCH 10/15/22.5/27.5 mm iat = Pa (|. @d cle Fig.2 Outline. Specific reference data for the 100 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz at 100 kHz Tangent of loss angle: C<0.1 uF $30 x 104 <60 x 104 $130 x 104 0.1 uF <C<1.0pF $30 x 104 <60 x 104 - C>1.0 pF $30 x 104 <75 x 104 - Rated voltage pulse slope (dU/dt)p at Urge: P=10.0 mm 60 V/us P= 15.0 mm 26 V/us P=22.5mm 12 Vus P=27.5mm 9 Vius R between leads, for C < 0.33 uF >15000 MQ RC between leads, for C > 0.33 uF >5000 s Available 100 V DC versions FIRST 9 DIGITS OF PACKAGING DIMENSIONS C-tol CATALOGUE NUMBER ORDERING L inb b=5.041.0 +10% 2222 344 21... on request in box = 5.0+1.0mm cose +5% 2222 344 22... on request +10% 2222 344 28... on request Taped on reel H = 18.5 mm; note 1 +5% 2222 344 29... on request Note 1. H=in-tape height; for detailed specifications refer to this handbook, Chapter Packaging. 1996 Oct 21 264Philips Components Product specification Metailized Polycarbonate film capacitors MKC 344 Urac = 100 V; Urnac = 63 V loose and taped CATALOGUE NUMBER 2222 344 ..... AND PACKAGING LOOSE IN BOX; |, = 5.0+1.0 mm REEL Cc DIME NNIONS MASS t F x nx last 5 digits of (uF) (9) (mm) catalogue number spa spa C-tol = +10% Pitch = 10.0 +0.4 mm; d; = 0.60 +0.06 mm 0.082 21823 0.1 21104 4.0 10.0 x 12.5 0.7 1000 1400 0.12 21124 0.15 21154 0.18 21184 5.0 x 11.0 x 12.5 0.9 1000 1100 0.22 21224 Pitch = 15.0 +0.4 mm; d; = 0.80 +0.08 mm 0.27 21274 0.33 21334 5.0x 14.0 17.5 1.1 1000 1100 0.39 21394 0.47 21474 0.56 21564 6.0 x 12.0 x 17.5 1.4 1000 900 0.68 21684 0.82 21824 7.0 * 13.5 x 17.5 1.8 1000 800 1 21105 Pitch = 22.5 +0.4 mm; d; = 0.80 +0.08 mm 1.2 21125 6.0 x 15.5 x 26.0 2.8 200 600 1.5 21155 1.8 7.0 x 16.5 x 26.0 4.3 21185 200 550 2.2 4.3 21225 8.5 x 18.0 x 26.0 200 450 2.7 5.1 21275 3.3 10.0 x 19.5 x 26.0 541 21335 200 350 Pitch = 27.5 +0.4 mm; d; = 0.80 +0.08 mm 3.9 21395 11.0 x 21.0 x 31.0 74 100 300 4.7 21475 - 21565 5.6 13.0 x 23.0 x 31.0 10.2 6 100 250 6.8 21685 1996 Oct 21 265Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 MKC 344 GENERAL DATA PITCH 10/15/22.5/27.5 mm 6 im 5 Sd a Fig.3 Outline. Specific reference data for the 250 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz at 100 kHz Tangent of loss angle: C<0.1pF <30 x 10-4 <60 x 10-4 <130 x 10-4 0.1 pF<C<1.0pF <30 x 10-4 <60 x 10-4 - C> 1.0 pF <30 x 1074 <75 x 10-4 - Rated voltage pulse slope (dU/dt), at Ura: P= 10.0 mm 90 V/us P= 15.0 mm 36 V/us P=22.5mm 16 Vius P=27.5mm 14 V/us R between leads, for C < 0.33 pF >30000 MQ RC between leads, for C > 0.33 uF >10000 s Available 250 V DC versions FIRST 9 DIGITS OF PACKAGING DIMENSIONS C-tol CATALOGUE NUMBER ORDERING L in bo = 5.0 41.0 mm +10% 2222 344 45... on request 0088 1 BOX mers +5% 2222 344 43... on request 10% 2222 344 48... on request Taped on reel H = 18.5 mm; note 1 +5% 2222 344 49... on request Note 1. H=in-tape height; for detailed specifications refer to this handbook, Chapter Packaging. 1996 Oct 21 266Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 Unde = 250 V; Upac = 160 V loose and taped CATALOGUE NUMBER 2222 344 ..... AND PACKAGING LOOSE IN BOX; |, = 5.0+1.0 mm REEL Cc DIMENSIONS MASS t FE bxhx last 5 digits of (uF) (9) (mm) catalogue number SPO SPQ C-tol = 10% Pitch = 10.0 +0.4 mm; d; = 0.60 40.06 mm 0.039 45393 0.047 45473 4.0 x 10.0 x 12.5 0.7 1000 1400 0.056 45563 0.068 45683 Pitch = 15.0 +0.4 mm; d; = 0.80 +0.08 mm 0.082 45823 0.1 45104 5.0x 11.0 17.5 14 1000 1100 0.12 45124 0.15 45154 0.18 45184 6.0 x 12.0 x 17.5 1.4 1000 900 0.22 45224 0.27 45274 7.0 x 13.5 x 17.5 1.8 1000 800 0.33 45334 Pitch = 22.5 +0.4 mm; d = 0.80 +0.08 mm 0.39 45394 6.0 x 15.5 x 26.0 2.8 200 600 0.47 45474 0.56 45564 7.0 x 16.5 x 26.0 3.5 200 550 0.68 45684 0.82 45824 8.5 x 18.0 x 26.0 51 200 450 1 45105 Pitch = 27.5 +0.4 mm; d; = 0.80 +0.08 mm 1.2 9.0 x 19.0 x 31.0 7.4 45125 100 400 1.5 74 45155 11. 1. 1. 100 300 18 Ox210x310 | t02 45185 2.2 13.0 x 23.0 x 31.0 10.2 45225 100 250 1996 Oct 21 267Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 MKC 344 GENERAL DATA PITCH 10/15/22.5/27.5 mm + h Mt ' Fig.4 Outline. Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz at 100 kHz Tangent of loss angle: C<0.1 uF <30 x 10-4 <60 x 10-4 <130 x 104 0.1 pF <C<1.0pF <30 x 10-4 <60 x 10-4 - Rated voltage pulse slope (dU/dt)q at Upac: P=10.0 mm 140 V/us P= 15.0 mm 60 V/us P = 22.5 mm 26 Vius P=27.5mm 22 Vis R between leads, for C < 0.33 uF >30000 MQ RC between leads, for C > 0.33 pF >10000 s Availabie 400 V DC versions FIRST 9 DIGITS OF PACKAGING DIMENSIONS C-tol CATALOGUE NUMBER ORDERING Loose in box +10% 2222 344 51... on request |, =5.0 1.0 mm t5% 2222 344 52... on request Taped on reel +10% 2222 344 58... on request H = 18.5 mm; note 1 15% 2222 344 59... on request Note 1. H=in-tape height; for detailed specifications refer to this handbook, Chapter Packaging. 1996 Oct 21 268Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 URac = 400 V; URac = 220 V loose and taped CATALOGUE NUMBER 2222 344 ..... AND PACKAGING LOOSE IN BOX; |, = 5.0 +1.0 mm REEL c pimensions MASS t (uF) xn x (g) last 5 digits of (mm) catalogue number SPQ SPQ C-tol = +10% Pitch = 10.0 +0.4 mm; d; = 0.60 0.06 mm 0.01 51103 0.012 51123 0.015 51153 0.018 4.0 x 10.0 x 12.5 0.7 51183 1000 1400 0.022 1223 0.027 51273 0.033 51333 Pitch = 15.0 +0.4 mm; d; = 0.80 +0.08 mm 0.039 51393 0.047 51473 5.0x 11.0 17.5 1.1 1000 1100 0.056 51563 0.068 51683 0.082 51823 6.0 x 12.0 17.5 1.4 1000 900 0.1 51104 0.12 51124 7.0 x 13.5 x 17.5 1.8 1000 800 0.15 51154 Pitch = 22.5 +0.4 mm; d; = 0.80 +0.08 mm 0.18 51184 6.0 x 15.5 x 26.0 2.8 200 600 0.22 51224 0.27 7.0 x 16.5 x 26.0 3.5 51274 200 550 0.33 3.5 51334 3 8.5 x 18.0 x 26.0 200 450 0.39 5.1 51394 0.47 10.0 x 19.5 x 26.0 5.1 51474 200 350 Pitch = 27.5 +0.4 mm; d; = 0.80 +0.08 mm 0. 51564 56 11.0 x 21.0 x 31.0 7.4 100 300 0.68 51684 . 51824 0.82 13.0 x 23.0 x 31.0 10.2 100 250 1 51105 1996 Oct 21 269Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 MKC 344 GENERAL DATA PITCH 10/15/22.5/27.5 mm > a oe It Fig.5 Outline. Specitic reference data for the 630 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz at 100 kHz Tangent of loss angle: C<0.1 pF <30 x 104 <60 x 10-4 <130 x 104 0.1 uF <C<1.0 pF <30 x 10+ <60 x 10-4 ~ Rated voltage pulse slope (dU/dt)p at Ung: P= 10.0 mm 200 V/us P=15.0 mm 90 V/us P=22.5mm 36 V/us P=27.5mm 30 V/us R between leads, for C < 0.33 uF >30000 MQ RC between leads, for C > 0.33 pF >10 000 s Available 630 V DC versions FIRST 9 DIGITS OF PACKAGING DIMENSIONS C-tol CATALOGUE NUMBER ORDERING . +10% 2222 344 61... on request Loose in box =5.01.0 mm +5% 2222 344 62... on request +10% 2222 344 68... on request Taped on reel H = 18.5 mm; note 1 +5% 2222 344 69... on request Note 1. H-=in-tape height; for detailed specifications refer to this handbook, Chapter Packaging. 1996 Oct 21 270Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 URde = 630 V; Unac = 220 V loose and taped CATALOGUE NUMBER 2222 344 ..... AND PACKAGING c DIMENSIONS MASS LOOSE IN BOX; |, = 5.0+1.0 mm REEL (uF) nm i (g) last 5 digits of catalogue number SPQ sPa C-tol = +10% Pitch = 10.0 +0.4 mm; d; = 0.60 40.06 mm 0.01 4.0 x 10.0 x 12.5 0.7 61103 1000 1400 0.012 61123 0.015 5.0 x 11.0 x 12.5 0.9 61153 1000 1100 0.018 61183 0.022 6.0 x 12.0 x 12.5 1.0 61223 1000 900 Pitch = 15.0 +0.4 mm; d; = 0.80 +0.08 mm 0.027 5.0 x 11.0 x 17.5 1.4 61273 1000 1100 0.033 1.4 61333 6.0 x 12.0 x 17.5 1000 900 0.039 1.8 61393 0.047 1.8 61473 7.0 x 13.5 x 17.5 1000 800 0.056 2.6 61563 0.068 8.5x15.0x 17.5 2.6 61683 1000 650 Pitch = 22.5 +0.4 mm; d,; = 0.80 +0.08 mm 0.082 2.8 61823 0.1 7.0 x 16.5 x 26.0 61104 200 550 0.12 3.5 61124 0.15 8.5 x 18.0 x 26.0 3.5 61154 200 450 0.18 10.0 x 19.5 x 26.0 51 61184 200 350 0.22 61224 Pitch = 27.5 +0.4 mm; d; = 0.80 +0.08 mm 0.27 61274 0.33 11.0 x 21.0 x 31.0 7.4 61334 100 300 0.39 61394 0.47 13.0 x 23.0 x 31.0 10.2 61474 100 250 1996 Oct 21 271Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 CONSTRUCTION Description e Low-inductive wound cell of metallized polycarbonate (PC) film, potted with epoxy resin in a blue flame-retardant case e Radial copper leads, solder-coated Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board. SPACE REQUIREMENTS ON PRINTED-CIRGUIT BOARD The maximum length and width of film capacitors is shown in Fig.7: e Eccentricity as in Fig.7. The maximum eccentricity is smailer than or equal to the lead diameter of the product concerned Product height with seating piane as given by IEC 717 as reference: Dmax <h + 0.3 mm. metallized polycarbonate film ~~ metal spray layer ~~ connecting wire-"~ Fig.6 Construction. Z| Dmax= b + 0.3 mm DAR930750 whe | Imax =1+ 0.3 mm Fig.7 Lay-out. Mounting NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by automatic insertion machines. For detailed tape specifications refer to this handbook Chapter Packaging. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK It must be ensured that the stand-off pips are in good contact with the printed-circuit board: For pitches <15 mm capacitors shall be mechanically fixed by the leads e For larger pitches the capacitors shall be mounted in the same way and the body clamped. 1996 Oct 21 RATINGS AND CHARACTERISTICS Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 +1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 42%. For reference testing, a conditioning period shall be applied of 96 +4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. 272Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 Capacitance All capacitance values are specified at 1 kHz. pRo2t03 ACIC (%) 109 104 { (Hz) 105 Fig.8 Capacitance change as a function of frequency; typical curve. DRO2104 2 T | ACIC (%) 0 4 | en L_ SN 2 NIN a S50V series | L IN SN asov Aoov eres | | | 250V series -4 | | } Pid ! NS 7 6 a | Lo} | 100V series -60 -20 20 60 400 Tapp CC) Fig.9 Capacitance change as a function of ambient temperature; typical curves. 1996 Oct 21 273Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 Tangent of loss angle TANGENT OF LOSS ANGLE CAPACITANCE at 1 kHz at 10 kHz at 100 kHz C<0.1 uF $30 x 10+ <60 x 10-4 <130 x 10-4 O.1 uF <C<1 pF <30 x 10-4 <60 x 104 - C>1 pF <30 x 10-4 <75 x 104 - 102 DRO2105 dissipation factor (x 10-4) 107 10 a 102 103 10 f (Hz) 10 Fig.10 Tangent of loss angle as a function of frequency; typical curve. Temperature e Storage temperature: T sig = -25 C to +40 C with RH maximum 80% without condensation. Voltage Category voltage: U, = 0.8 x Unde Test voltage between leads: 1.6 x Upac * Test voltage between interconnected leads and case (foil method): 2 x Upac (min. 200 V). 1996 Oct 21 274Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 Rated voltage pulse slope (dU/dt), MAXIMUM RATED PULSE LOAD RATED VOLTAGE (Vius)OX2) Ur (V) P= 10.0 mm P = 15.0 mm P=22.5mm P=27.5mm 100 60 26 12 9 250 90 36 16 14 400 140 60 26 22 630 200 90 36 30 Notes 1. The maximum pulse load values are valid for voltages equal to the rated voltage. For lower voltages the given values may be multiplied by Ung, and divided by the applied voltage. 2. Ifthe pulse requirement is satisfied, a check must be made to ensure that the maximum dissipation is not exceeded. Insulation resistance The insulation resistance is measured after a voltage has been applied for 1 minute +5 seconds, the voltage being 100 +15 V for the 100, 250 and 400 V versions and 500 +50 V for the 630 V version: e R between leads for C < 0.33 uF: >30000 MQ RC between leads for C > 0.33 pF: >10000 s e R between interconnected leads and case (foil method): >30000 MQ. DRO2106 108 RC {s) 104 10 402 50 0 50 Tamb (C) 100 Fig.11 RC product as a function of ambient temperature; typical curve. 1996 Oct 21 275Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 Maximum dissipation Power dissipation curves as a function of pitch and 250 Breet? capacitor thickness (see Figs 12 and 13) Prax (mW) PITCH 200 Bmax (mm) (mm) 10 15 22.5 27.5 150 4.0 1 - - - 5.0 2 4 - ~- 6.0 3 5 8 - 00 7.0 - 6 9 - 8.5 ~ 7 10 - 9.0 ~ - - 12 10.0 - ~ 11 ~ 0 20 40 60 80 100 11.0 ~ - = 13 Tamb (C) 13.0 ~ - ~ 14 Fig.12 Maximum permissible power dissipation as a function of ambient temperature, at various capacitor dimensions. ORS6T380 Prax (mw) 0 20 40 60 80 100 Tamp (C) Fig.13 Maximum permissible power dissipation as a function of ambient temperature, at various capacitor dimensions. 1996 Oct 21 276Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 Application note To select the capacitor for a certain application, the following conditions must be checked: 1. 2. MARKING Product marking CAPACITORS WITH PITCH 10 mm The capacitors are marked by laser print on the top with the following information: 1. 2. and on the side with the following information: oa Pron The peak voltage (U,) shall not be greater than the rated DC voitage (Upac). The peak-to-peak voltage (Upp) shall not be greater than 2 x J2 times the rated AC voltage (Urac) to avoid the ionisation inception level. The peak current (1) shall not exceed the maximum peak current, defined as maximum voltage pulse slope (dU/dt) multiplied by the capacitance: - (22) |,max = c( at max Or the voltage pulse slope shall not exceed the rated voltage pulse slope. If the puise voltage is lower than the rated voltage, the values (see Section Rated voltage pulse slope (dU/dt)R for more details) may be multiplied by Ug, and divided by the applied voltage. The dissipated power shall not be greater than the maximum permissible power dissipation stated in Figs 12 and 13. The free air ambient temperature for the capacitor does not exceed the category temperature. Since all metallized polycarbonate film capacitors have an intrinsically active flammability risk after a capacitor breakdown (short circuit), it is recommended that the power to the component is limited to 10 times the maximum allowed power dissipation (Pmax) during the short circuit failure mode of the capacitor. HEAD FACE FRONT FACE Rated capacitance code in accordance with IEC 62: 100n K n=nF; p= pF Tolerance on rated capacitance: K = +10%; J = +5%; DR941970 Year and week of manufacture (e.g. 9110 Rated voltage (DC) (e.g. 100 V) Code for dielectric material (MKC) Code for factory of origin (HQ) Manufacturer's type designation (344) Manufacturer (PH). Fig.14 Example of marking for a capacitor with pitch 10 mm. 1996 Oct 21 277Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 CAPACITORS WITH PITCH 15 mm The capacitors are marked by laser print on the top with the following information: HEAD FACE FRONT FACE 1. Rated capacitance code in accordance with IEC 62: n= nF; p= pF 820n K 100V 2. Tolerance on rated capacitance: K = +10%; J = +5% 344 MKC PHILIPS 3. Rated voltage (DC) (e.g. 400 V) Hae2t0 4. Manufacturer's type designation (344) DR9471980 5. Code for dielectric material (MKC); and on the side with the following information: 1. Manufacturer 2. Code for factory of origin (HQ) 3. Year and week of manufacture (e.g. 9210). CAPACITORS WITH PITCH 22.5 OR 27.5 mm The capacitors are marked by laser print on the top with the following information: 1. Rated capacitance code in accordance with IEC 62: n=nF;p=pF Tolerance on rated capacitance: K = 10%; J=15% Rated voltage (DC) (e.g. 100 V) Mantfacturer. Manufacturer's type designation (344) Code for dielectric material (MKC) Code for factory of origin (HQ) Year and week of manufacture (e.g. 9210). OnNoar WOW 1996 Oct 21 Fig.15 Example of marking for a capacitor with pitch 15 mm. HEAD FACE 1p2 K 100V PHILIPS 344 MKC HQ9210 0R941990 Fig.16 Example of marking for a capacitor with pitch 22.5 or 27.5 mm. 278Philips Components Metallized Polycarbonate film capacitors Product specificati MKC 344 jon Package marking The package containing the capacitors is marked as shown in Fig.17. a fF SP Vo (PHILIPS COMPONENTS _i) MADE IN BELGILM METAL. POLYCARB. FILM CAPACITOR MKC PADTAL POTTED TYPE LpF 418% 250V= 55 108-56 ih ORIG A17O PPC HQ 1234 GARAGE RE MKC 344 SDRERAAE AERAAEE (come epee 344 45105 CCAB24 Fig.17 Barcode label. Barcode label explanation LINE a kon oa 10 MARKING EXPLANATION Manufacturer's name Country of origin Sub-family Type description Capacitance value, tolerance, voltage and climatic category (IEC 68-1) Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO Wage number of final inspection. (only for 4e products Product type description Quantity and production period, year and week code Product code (12NC) 1996 Oct 21 279Philips Components Product specification Metallized Polycarbonate film capacitors MKC 344 QUICK REFERENCE TEST REQUIREMENTS (see note 1) TEST PROCEDURE REQUIREMENTS (quick reference) Robustness of leads Tensile and bending: IEC 68-2-21 Resistance to soldering heat: IEC 68-2-20 Component solvent resistance solder bath: 260 C; 10s isopropyl alcohol: 23 C; 5 minutes no visible damage legible marking |AC/C| < 1% Atan & < 30 x 107+; note 2 Robustness of component Vibration: IEC 68-2-6 Shock: 4EC 68-2-27 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s?; 6 hours half sinewave; 490 m/s?; 11 ms |AC/C| < 2.5% Atan 5 < 30 x 10+; note 2 Climatic sequence Dry heat: IEC 68-2-2 IEC 68-2-30" Coid: IEC 68-2-1 Damp heat, cyclic, test Db, remaining cycles: Damp heat cyclic, test Db, first cycte: 16 hours; 100 C 2 hours; 55 C [AC/C| < 3% Atan 8 < 50 x 107+; note 2 Ring 2 50% of specified value 1.25 x Ucac; 100 C 4EC 68-2-30 Other applicable tests Damp heat steady state: 56 days; 40 C; 90 to 95% RH |AC/C] < 3% TEC 68-2-3" Atan 8 < 50 x 10; note 2 Ring = 50% of specified value Endurance (DC): 2000 hours; |AC/C| < 3% IEC 384-6 1.25 x Unac; 85 C Atan 8 < 30 x 10-4; note 2 Ring 2 50% of specified vaiue Heat storage: IEC 384-6 2000 hours; 100 C |AC/C| < 3% Atan 8 < 30 x 104; note 2 Resistance to soldering heat with preheating: body temperature: 80 C; bath temperature: 260 C; |AC/C| < 1%) Atan 6 < 30 x 1074; note 2 IEC 384-6" dwell time: 5 s Passive flammability: class C no burning IEC 695-2-2 Notes 1. For detailed information, see Type specification. 2. Measuring frequency 10 kHz. 1996 Oct 21 280