Nu-TrolTM Control Cleaner for Electronics 401B Technical Data Sheet 401B-Aerosol Description The 401B Nu-TrolTM Control Cleaner for Electronics is a unique blend of high purity solvents and a lubricating mineral oil that is excellent for cleaning and lubricating delicate moving parts in electronics. The solvent system also effectively dissolves oil and organic residues. This product is useful in a variety of electronics applications such as controls, potentiometers, dials, switches, tuners, and servomechanisms. Features and Benefits * Suitable for use in food facilities as a non-food chemical--Canadian and NFS recognition letters available on request * Safe on many plastics * Contains electronic grade mineral oil * CARB and RoHS compliant Usage Parameters Properties Shelf Life Temperature Ranges Value 5y Properties Storage Temperature Limits a) Value -20 to 40 C [-4 to 104 F] a) Storage below zero is not necessary. Cool, dry, and well ventilated area recommended. Properties Physical Properties Color Odor Density @25C [77 F] Viscosity @25C [77 F] Flash Point Boiling Point Vapor Pressure @25C [77 F] Volatile Organic Content (VOC) Solubility in Water Method -- Closed Cup Page 1 of 3 Date: 29 March 2019 / Ver. 1.03 Value Clear Mild hydrocarbon 0.73 g/mL <20.5 mm2/s -29 C [-20 F] 52 C [126 F] 22 kPa [167 mmHg] 75% Insoluble Nu-TrolTM Control Cleaner for Electronics 401B Technical Data Sheet 401B-Aerosol Compatibility Substrate Compatibility: Consult 401B partial compatibility chart table for substrate compatibility. It is always recommended to perform a compatibility test on a non-critical test area prior to large scale applications. Perform this test even if the chart predicts high compatibility since modern plastic parts may incorporated hidden incompatible materials in the form of plastic blends or as protective and decorative coatings. Compatibility Chart Plastic type Epoxy ABS (acrylonitrile butadiene styrene PMMA (Acrylic) PVC (Polyvinyl chloride) HD-PE (high density polyethylene) LD-PE (low density polyethylene) PP (polypropylene) PS (polystyrene) PC (Polycarbonate) Resistance Very Good Poor Good Good Good Partial Good Partial Poor ATTENTION ! Use with care on thin plastics or near parts that are chemically sensitive. Solvent Miscibility: The 401B is generally miscible organic solvent, but it is immiscible with water. Health, Safety, and Environmental Awareness Please see the 401B Safety Data Sheet (SDS) for more details on transportation, storage, handling and other security guidelines. Health and Safety: This liquid is flammable and should be kept away from flames and other ignition sources. Avoid breathing in fumes or direct contact with the material. HMIS(R) RATING HEALTH: NFPA(R) 704 CODES * 2 FLAMMABILITY: 3 PHYSICAL HAZARD: 0 3 2 PERSONAL PROTECTION: Approximate HMIS and NFPA Risk Ratings Legend: 0 (Low or none); 1 (Slight); 2 (Moderate); 3 (Serious); 4 (Severe) Environmental Impact: It is RoHS and CARB compliant. Page 2 of 3 Date: 29 March 2019 / Ver. 1.03 0 Nu-TrolTM Control Cleaner for Electronics 401B Technical Data Sheet 401B-Aerosol Application Instructions To clean residues in aerosol format 1. Spray dirty area. 2. Ensure that wash runs off the circuit board along the shortest unencumbered path to prevent redeposit of solvated residues Packaging and Supporting Products Cat. No. 401B-140G 401B-340G Packaging Aerosol Aerosol Net Volume 188 mL 6.35 fl oz 457 mL 15.4 fl oz Net Weight 140 g 4.93 oz 340 g 11.9 oz Packaging Weight 2.2 kg a) 4.9 lb a) a) 4.6 kg 10 lb a) a) Case pack of ten Supporting Products * * Hog Hair Cleaning Brush: Cat. No. 852 Large Hog Hair Cleaning Brush: Cat. No. 853 Technical Support Contact us regarding any questions, improvement suggestions, or problems with this product. Application notes, instructions, and FAQs are located at www.mgchemicals.com. Email: support@mgchemicals.com Phone: +(1) 800-340-0772 (Canada, Mexico & USA) +(1) 905-331-1396 (International) Fax: +(1) 905-331-2862 or +(1) 800-340-0773 Mailing address: Manufacturing & Support 1210 Corporate Drive Burlington, Ontario, Canada L7L 5R6 Head Office 9347-193rd Street Surrey, British Columbia, Canada V4N 4E7 Disclaimer This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. M.G. Chemicals Ltd. does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. Page 3 of 3 Date: 29 March 2019 / Ver. 1.03