2322 4/5/6.. ..... Vishay BCcomponents PTC Thermistors For Overload And Overcurrent Protection FEATURES QUICK REFERENCE DATA PARAMETER Switch temperature; note 1 VALUE UNIT 140 C 20 V (DC) Maximum voltage; note 2: 2322 66. 5...4 2322 66. 4/5/6...1 30 to 60 V (DC) 2322 66. 4/5/6...2 145 V (RMS) 2322 66. 4/5/6...3 265 V (RMS) 2322 66. 4/5/6...1 -40 to +85 C 2322 66. 4/5/6...2 0 to 70 C 2322 66. 4/5/6...3 0 to 70 C Temperature range: Climatic category: * Different voltages to be chosen in function of the application * Available in three mechanical versions: - 2322 66. 4.... naked discs - 2322 66. 5.... leaded and coated - 2322 66. 6.... taped, on reel (to diameter 12.5 mm) * Wide range of trip and non-trip currents: from 17 mA up to 4.5 A for the trip current * Wide range of resistance: from 0.3 up to 3 k * Small ratio between trip and non-trip currents (It/Int = 1.5 at 25 C) * High maximum inrush current * Excellent long term behaviour, also in humidity * Leaded parts withstand mechanical stresses and vibration * UL approved PTCs are guaranteed to withstand severe test programmes including: - long-life cycle tests (over 5000 trip cycles) - long-life storage tests (3000 hours at 250 C) - electrical cycle tests at low ambient temperatures (-40 C or 0 C) - damp-heat and water immersion tests - overvoltage tests at up to 200% of rated voltage. * UL file E148885 according to XGPU2 standard UL1434. APPLICATIONS * * * * * Telecommunications Automotive systems Industrial electronics Consumer electronics Electronic data processing DESCRIPTION 66. 4/5/6...1 40/125/56 66. 4/5/6...2/3 25/125/56 Notes 1. 2322 660 5 ...4 types, have a 155C switch temperature. These directly heated thermistors have a positive temperature coefficient and are primarily intended for overload protection. They consist of a naked disc or with two tinned brass or copper clad steel leads and coated. 2. 2322 660 4/5/6 ...3 types, have a 120 C switch temperature. 3. Rated voltages are respectively: PACKAGING 24 to 48 V (AC or DC) 120 V (AC or DC) 230 V (AC or DC). Document Number: 29069 Revision: 10-Oct-03 All tape and reel specifications are in accordance with "IEC 60286-3". For technical questions contact: nlr.europe@vishay.com www.vishay.com 151 2322 4/5/6.. ..... Vishay BCcomponents PTC Thermistors For Overload And Overcurrent Protection VERY LOW VOLTAGE TYPES 20 V ELECTRICAL DATA AND ORDERING INFORMATION for 2322 66. 5...4; max. voltage = 20 V (ac or dc)(1) Ires MAX. at Vmax and 25 C (mA) DISSIP. FACTOR (mW/K) TYPICAL D (mm) CATALOG NUMBERS 3.5 80 7.0 5 2322 660 53514 4.7 100 7.0 5 2322 660 54714 Int MAX. at 25 C (mA) It MIN. at 25 C (mA) R25 20% () I(4) MAX. at 25 C (mA) 350 525 4.10 470 705 2.30 610 915 1.55 6.7 120 8.0 7 2322 661 56114 700 1050 1.20 7.7 125 8.0 7 2322 661 57014 900 1350 0.80 10 150 8.8 8.5 2322 661 59014 1200 1800 0.50 13 200 10.0 10.5 2322 662 51224 1600 2400 0.33 17 260 11.6 12.5 2322 662 51624 2200 3300 0.22 24 320 15.0 16.5 2322 663 52224 3000 4500 0.15 33 400 19.0 20.5 2322 664 53024 LOW VOLTAGE TYPES 30 - 60 V ELECTRICAL DATA AND ORDERING INFORMATION for 2322 66. 4/5/6...1; max. voltage = 30 to 60 V (ac or dc)(1) CATALOG NUMBERS(3) Int(2) MAX. at 25 C (mA) It(2) MIN. at 25 C (mA) R25 20% () V MAX. (V) I(4) MAX. at 25 C (mA) Ires MAX. at Vmax and 25 C (mA) DISSIP. FACTOR (mW/K) TYPICAL D (mm) BULK TAPE ON REEL 94 145 50 60 800 22 6.9 4.5 2322 660 59491 2322 660 69491 130 195 25 60 1200 25 6.9 4.5 2322 660 51311 2322 660 61311 180 270 13 30 1700 45 6.9 4.5 2322 660 51811 2322 660 61811 270 405 6 30 2500 60 6.9 4.5 2322 660 52711 2322 660 62711 320 480 5 30 3500 62 7.8 6.5 2322 661 53211 2322 661 63211 410 615 3 30 4500 65 7.8 6.5 2322 661 54111 2322 661 64111 470 705 2.5 30 5000 70 8.8 8.0 2322 661 54711 2322 661 64711 540 810 1.9 30 6000 75 8.8 8.0 2322 661 55411 2322 661 65411 610 915 1.7 30 7000 80 9.9 10 2322 662 56111 2322 662 66111 700 1050 1.3 30 8000 90 9.9 10 2322 662 57011 2322 662 67011 830 1245 1.1 30 10000 100 11.5 12 2322 662 58311 2322 662 68311 920 1380 0.9 30 11000 105 11.5 12 2322 662 59211 2322 662 69211 1 170 1755 0.7 30 13500 140 14.5 16 2322 663 51121 - 1390 2085 0.5 30 16000 170 14.5 16 2322 663 51321 - 1770 2655 0.4 30 20000 200 18.7 20 2322 664 51721 - 2050 3075 0.3 30 23000 220 18.7 20 2322 664 52021 - Notes 1. The thermistors are clamped at the seating plane. 2. For leadless types the values given for Int and It are only valid for thermistors mounted in accordance with "IEC 60738". Thermistor dissipation depends on mounting and can slightly affect the typical values. 3. For leadless types replace the 8th digit in the catalog numbers by 4. 4. Imax is the maximum overload current that may flow through the PTC when it passes from the low ohmic to the high ohmic state. www.vishay.com 152 For technical questions contact: nlr.europe@vishay.com Document Number: 29069 Revision: 10-Oct-03 2322 4/5/6.. ..... PTC Thermistors For Overload And Overcurrent Protection Vishay BCcomponents MAINS VOLTAGE TYPES 145 V ELECTRICAL DATA AND ORDERING INFORMATION for 2322 66. 4/5/6...2; max. voltage = 145 V (ac or dc)(1) Int(2) MAX. at 25 C (mA) It(2) MIN. at 25 C (mA) R25 20% () I(4) MAX. at 25 C (mA) 47 65 93 110 130 170 210 250 270 320 360 410 450 600 710 880 1000 70 100 140 165 195 255 315 375 405 480 540 615 675 900 1065 1320 1500 240 115 55 40 28 19 12 9.4 8 6.7 5.3 4.6 3.8 2.9 2.1 1.7 1.3 200 300 450 500 600 1000 1400 2000 2200 3000 3500 4500 5000 7200 8500 11000 13000 Ires MAX. at Vmax and 25 C (mA) 9 11 13 13 13 15 15 16.5 16.5 19 19 22.5 22.5 28.5 28.5 37.5 37.5 CATALOG NUMBERS(3) DISSIP. FACTOR (mW/K) TYPICAL D (mm) BULK TAPE ON REEL 7.3 7.3 7.3 7.3 7.3 8.3 8.3 9 9 10.5 10.5 11.7 11.7 15.5 15.5 19.8 19.8 4.5 4.5 4.5 4.5 4.5 6.5 6.5 8.0 8.0 10 10 12 12 16 16 20 20 2322 660 54792 2322 660 56592 2322 660 59392 2322 660 51112 2322 660 51312 2322 661 51712 2322 661 52112 2322 661 52512 2322 661 52712 2322 662 53212 2322 662 53612 2322 662 54112 2322 662 54512 2322 663 56012 2322 663 57112 2322 664 58812 2322 664 51022 2322 660 64792 2322 660 66592 2322 660 69392 2322 660 61112 2322 660 61312 2322 661 61712 2322 661 62112 2322 661 62512 2322 661 62712 2322 662 63212 2322 662 63612 2322 662 64112 2322 662 64512 - - - - MAINS VOLTAGE TYPES 265 V ELECTRICAL DATA AND ORDERING INFORMATION for 2322 66. 4/5/6...3; max. voltage = 265 V (ac or dc)(1) Int(2) MAX. at 25 C (mA) It(2) MIN. at 25 C (mA) R25 25% () I(4) MAX. at 25 C (mA) 11 15 19 28 39 63 76 95 110 140 170 190 210 250 280 320 400 490 590 700 800 17 23 29 42 59 95 115 143 165 210 255 285 315 375 420 480 600 735 855 1050 1200 3000 1900 1200 500 260 120 85 56 48 29 22 18 17 12 11 8.4 6.6 4.4 4 2.8 2.1 80 110 140 200 300 450 550 600 650 800 900 1000 1300 1500 1800 2200 3000 3500 4500 5500 5500 Ires MAX. at Vmax and 25 C (mA) 6.5 6.5 6.5 6.8 6.8 7 7 7 7.5 8 9 9.5 10 11 12 13 15 16 19.5 21 22.5 CATALOG NUMBERS(3) DISSIP. FACTOR (mW/K) TYPICAL D (mm) BULK TAPE ON REEL 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 8.3 8.3 9 9 10.5 10.5 11.7 11.7 15.5 15.5 19.8 19.8 19.8 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 6.5 6.5 8.0 8.0 10 10 12 12 16 16 20 20 20 2322 660 51193 2322 660 51593 2322 660 51993 2322 660 52893 2322 660 53993 2322 660 56393 2322 660 57693 2322 660 59593 2322 661 51113 2322 661 51413 2322 661 51713 2322 661 51913 2322 662 52113 2322 662 52513 2322 662 52813 2322 662 53213 2322 663 54013 2322 663 54913 2322 664 55913 2322 664 57013 2322 664 58013(5) 2322 660 61193 2322 660 61593 2322 660 61993 2322 660 62893 2322 660 63993 2322 660 66393 2322 660 67693 2322 660 69593 2322 661 61113 2322 661 61413 2322 661 61713 2322 661 61913 2322 662 62113 2322 662 62513 2322 662 62813 2322 662 63213 - - - - - Notes 1. The thermistors are clamped at the seating plane. 2. For leadless types the values given for Int and It are only valid for thermistors mounted in accordance with "IEC 60738". Thermistor dissipation depends on mounting and can slightly affect the typical values. 3. For leadless types replace the 8th digit in the catalog numbers by 4. 4. Imax is the maximum overload current that may flow through the PTC when it passes from the low ohmic to the high ohmic state. 5. Not UL approved. Document Number: 29069 Revision: 10-Oct-03 For technical questions contact: nlr.europe@vishay.com www.vishay.com 153 2322 4/5/6.. ..... Vishay BCcomponents PTC Thermistors For Overload And Overcurrent Protection DIMENSIONS in millimeters T T1 D D THICKNESS DIMENSIONS AND CATALOG NUMBERS T1 MAX. 4 1 +0.6 5 -0.1 20 min. T MAX. CATALOG NUMBERS 2322 ... ..... N.A. 3.0 66. 5...4 1.7 4.0 66. 4/5...1 2.8 5.0 66. 4/5...2 3.2 5.5 66. 4/5...3 0.6 Component outline for 2322 66. 4/5...1/2/3. DEVICE AND TAPE DIMENSIONS, PACKAGING AND CATALOG NUMBERS in millimeters D MAX. H1 MAX. PACKAGING AND CATALOG NUMBERS 2322 ... ..... H3 MAX. NAKED LEADED BULK LEADED TAPED 5 26 9.5 660 49491; 660 41311; 660 41811; 660 42711; 660 44792; 660 46592; 660 49392; 660 41112; 660 41312; 660 41193; 660 41593; 660 41993; 660 42893; 660 43993; 660 46393; 660 47693; 660 49593 660 59491; 660 51311; 660 51811; 660 52711; 660 54792; 660 56592; 660 59392; 660 51112; 660 51312; 660 51193; 660 51593; 660 51993; 660 52893; 660 53993; 660 56393; 660 57693; 660 53514; 660 54714; 660 59593 660 69491; 660 61311; 660 61811; 660 62711; 660 64792; 660 66592; 660 69392; 660 61112; 660 61312; 660 61193; 660 61593; 660 61993; 660 62893; 660 63993; 660 66393; 660 67693; 660 69593 7 28 11.5 661 43211; 661 44111; 661 41712; 661 42112; 661 41113; 661 41413 661 53211; 661 54111; 661 51712; 661 52112; 661 51113; 661 51413; 661 56114; 661 57014 661 63211; 661 64111; 661 61712; 661 62112; 661 61113; 661 61413 8.5 29.5 13.0 661 44711; 661 45411; 661 42512; 661 42712; 661 41713; 661 41913 661 54711; 661 55411; 661 52512; 661 52712; 661 51713; 661 51913; 661 59014 661 64711; 661 65411; 661 62512; 661 62712; 661 61713; 661 61913 10.5 31.5 15.0 662 46111; 662 47011; 662 43212; 662 43612; 662 42113; 662 42513 662 56111; 662 57011; 662 53212; 662 53612; 662 52113; 662 52513; 662 51224 662 66111; 662 67011; 662 63212; 662 63612; 662 62113; 662 62513 12.5 32.5 17.0 662 48311; 662 49211; 662 44112; 662 44512; 662 42813; 662 43213 662 58311; 662 59211; 662 54112; 662 54512; 662 52813; 662 53213; 662 51624 662 68311; 662 69211; 662 64112; 662 64512; 662 62813; 662 63213 16.5 - - 663 41121; 663 41321; 663 46012; 663 47112; 663 44013; 663 44913 663 51121; 663 51321; 663 56012; 663 57112; 663 54013; 663 54913; 663 52224 - 20.5 - - 664 41721; 664 42021; 664 48812; 664 41022; 664 45913; 664 47013 664 51721; 664 52021; 664 58812; 664 51022; 664 55913; 664 57013; 664 53024 - www.vishay.com 154 For technical questions contact: nlr.europe@vishay.com Document Number: 29069 Revision: 10-Oct-03 2322 4/5/6.. ..... PTC Thermistors For Overload And Overcurrent Protection Vishay BCcomponents IMAX AS A FUNCTION OF VOLTAGE. 250 % 200 It 150 I nt 100 I max 50 0 50 25 0 25 50 75 T amb ( oC) 100 CURRENT DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE. CCB701 200 Imax (%) 150 100 80 0 40 50 70 100 120 150 Vrated (%) Imax as stated in the Electrical data and ordering information tables, is the maximum overload current that may flow through the PTC when passing from the low ohmic to high ohmic state at rated voltage. When other voltages are present after tripping, the Imax value can be derived from the above Imax as a function of voltage graph. Voltages below Vrated will allow higher overload currents to pass the ptc. Example What maximum overload current is allowed for a thermistor type 2322 662 52513 at 0 C and a maximum voltage after tripping of 180 VRMS: Imax at 230 V and 25 C = 1.5 ARMS: see electrical data and ordering information for 2322 66. 4/5/6...3; max. voltage = 265 V (ac or dc) table. Imax at 180 V and 25 C = 1.85 ARMS (180 VRMS = 78% of 230 VRMS gives 123% of Imax). At 0 C this gives 1.68 ARMS maximum overload current. See Current deviation as a function of the ambient temperature drawing. Document Number: 29069 Revision: 10-Oct-03 For technical questions contact: nlr.europe@vishay.com www.vishay.com 155 2322 4/5/6.. ..... Vishay BCcomponents PTC Thermistors For Overload And Overcurrent Protection TYPICAL TRIP-TIME AS A FUNCTION OF TRIP CURRENT RATIO for 30 to 60 volt types. 10 2 Curve 1: typical D = 20 mm. Curve 2: typical D = 16 mm. Curve 3: typical D = 12.0 mm. Curve 4: typical D = 10.0 mm. Curve 5: typical D = 8.0 mm. Curve 6: typical D = 6.5 mm. Curve 7: typical D = 4.5 mm. Measured in accordance with "IEC 60738". For an example, see "Trip-time or switching time (ts)". ts 10 1 10 1 (1) (2) (3) (4) (5) (6) (7) 1 2 4 6 8 10 12 14 It / Int 16 TYPICAL TRIP-TIME AS A FUNCTION OF TRIP CURRENT RATIO for 145 and 265 volt types. 10 3 Curve 1: typical D = 20.0 mm. ts Curve 2: typical D = 16.0 mm. Curve 3: typical D = 12.0 mm. Curve 4: typical D = 10.0 mm. Curve 5: typical D = 8.0 mm. Curve 6: typical D = 6.5 mm. Curve 7: typical D = 4.5 mm. Measured in accordance with "IEC 60738". For an example, see "Trip-time or switching time (ts)". 10 2 10 (1) (2) (3) (4) (5) (6) (7) 1 10 1 1 2 4 6 8 10 12 14 It / Int 16 Trip-time or switching time (ts) To check the trip-time for a specific PTC, refer to the Electrical Data and Ordering Information tables for the value Int. Divide the overload or trip current by this Int and you realize the factor It/Int. This rule is valid for any ambient temperature between 0 and 70 C. Adapt the correct non-trip current with the appropriate curve in the Current Deviation as a Function of the Ambient Temperature graph. The relationship between the It/Int factor and the switching time is a function of the PTC diameter; see the above graphs. Example What will be the trip-time at Iol = 3 A and Tamb = 0 C of a thermistor type 2322 661 54711; 2.5 ; D = 8.0 mm: Int from Table 1: 470 mA at 25 C Int: 470 x 1.12 = 526 mA (0 C). Overload current = 3 A; factor It/Int: 30.526 = 5.70. In the typical trip-time as a function of trip current ratio for 30 to 60 volt types graph, at the 8.0 mm line and It/Int = 5.70, the typical trip-time is 1.7 s. www.vishay.com 156 For technical questions contact: nlr.europe@vishay.com Document Number: 29069 Revision: 10-Oct-03 2322 4/5/6.. ..... PTC Thermistors For Overload And Overcurrent Protection TYPICAL R/T CHARACTERISTICS TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 53514. Vishay BCcomponents TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 54714. 100 1000 R (y) R (y) 100 10 10 1 1 0 25 50 75 0 100 125 150 175 200 225 25 50 75 100 125 150 175 200 225 T (C) T (C) TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 54714. 1000 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 661 57014. 100 R (y) R (y) 100 10 10 1 1 0,1 0,1 0 25 50 75 100 125 150 175 200 225 0 25 50 75 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 661 59014. 100 100 125 150 175 200 225 T (C) T (C) TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 662 51224. 100 R (y) R () 10 10 1 1 0,1 0 25 50 75 10 125 150 175 200 225 0,1 0 25 50 T (C) Document Number: 29069 Revision: 10-Oct-03 For technical questions contact: nlr.europe@vishay.com 75 100 125 150 175 200 225 T (C) www.vishay.com 157 2322 4/5/6.. ..... Vishay BCcomponents PTC Thermistors For Overload And Overcurrent Protection TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 662 51624. TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 663 52224. 10 100 R (y) R (y) 10 1 1 0,1 0 25 50 75 100 125 150 175 200 225 0,1 0 25 50 75 100 125 150 175 200 225 T (C) T (C) TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 59491/51311. 106 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 51811/52711 and 661 53211. 105 R (W) R (W) 105 53211 51811 104 52711 104 103 103 102 102 51811 10 59491 52711 53211 51311 10 0 50 100 150 200 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 662 56111/57011/58311. 104 56111 R (W) 58311 57011 103 1 250 T (C) 100 150 200 250 T (C) 104 51121 R (W) 51321 59211 103 102 10 10 56111 50 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 662 59211 and 663 51121/51321. 102 1 0 57011 59211 1 58311 51211 51321 10-1 www.vishay.com 158 0 50 100 150 200 250 T (C) 10-1 0 For technical questions contact: nlr.europe@vishay.com 50 100 150 200 250 T (C) Document Number: 29069 Revision: 10-Oct-03 2322 4/5/6.. ..... PTC Thermistors For Overload And Overcurrent Protection TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 661 54111/54711/55411. Vishay BCcomponents TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 664 51721/52021. 104 104 54711 R (W) 55411 54111 103 R (W) 103 102 102 10 10 54111 1 1 54711 51721 52021 55411 0 50 100 150 200 250 T (C) TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 54792/56592/59392. 108 R (W) 54792 107 56592 106 59392 10-1 0 50 100 150 200 250 T (C) TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 661 52112/52512/52712. 106 52112 R (W) 52512 52712 105 104 105 103 104 102 103 54792 56592 59392 102 10 0 52112 10 52512 50 100 150 200 250 T (C) TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 51112/51312 and 661 51712. 106 51312 R (W) 51712 51112 105 1 0 50 52712 100 150 200 250 T (C) TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 662 53212/53612/54112. 106 53212 R (W) 53612 105 54112 104 104 103 103 102 102 10 53212 51112 51312 51712 10 0 53612 54112 50 Document Number: 29069 Revision: 10-Oct-03 100 150 200 250 T (C) 1 0 50 For technical questions contact: nlr.europe@vishay.com 100 150 200 250 T (C) www.vishay.com 159 2322 4/5/6.. ..... Vishay BCcomponents PTC Thermistors For Overload And Overcurrent Protection TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 662 54512 and 663 56012/57112. TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 661 54111/54711/55411. 104 106 R (W) 56012 54512 105 57112 54711 R (W) 55411 54111 103 104 102 103 102 10 10 1 54111 56012 54512 57112 0 50 100 150 200 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 51193/51593/51993. 108 51193 R (W) 51593 51993 107 1 250 T (C) 55411 0 50 100 105 58812 102 104 10 58812 100 150 200 106 0 50 100 51113 51022 150 52893 R (W) 250 T (C) 53993 56393 106 105 200 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 52893/53993/56393. 107 57693 R (W) 1 250 T (C) TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 660 57693/59593 and 661 51113. 51022 104 105 50 200 250 T (C) R (W) 103 0 150 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 664 58812/51022. 106 103 54711 59593 104 105 103 104 102 57693 103 59593 51113 10 www.vishay.com 160 0 50 100 150 200 250 T (C) 102 0 For technical questions contact: nlr.europe@vishay.com 50 100 150 200 250 T (C) Document Number: 29069 Revision: 10-Oct-03 2322 4/5/6.. ..... PTC Thermistors For Overload And Overcurrent Protection TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 662 52113/52513/52813. 106 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 661 51413/51713/51913. 107 52113 R (W) Vishay BCcomponents 52813 105 R (W) 51413 51713 106 51913 52513 104 105 103 104 102 103 52113 10 52513 102 52813 51413 1 0 50 100 150 200 10 250 T (C) TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 664 55913/57013. 55913 57013 105 50 100 150 200 250 T (C) TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC for 2322 662 53213 and 663 54013/54913. 106 R (W) 51913 0 51713 106 54013 R (W) 104 105 53213 54913 104 103 103 102 102 10 53213 10 54013 54913 1 0 50 100 150 200 250 T (C) 1 0 50 100 150 200 250 T (C) CHARACTERISTICS CONCERNING TAPED THERMISTORS PARAMETER Minimum pull out force of the component VALUE 5N Minimum pull off force of adhesive tape 6N Minimum tearing force tape 15 N Maximum pull off force tape-reel 5N Storage conditions Storage temperature range -25 to +40 C Maximum relative humidity 80% Document Number: 29069 Revision: 10-Oct-03 For technical questions contact: nlr.europe@vishay.com www.vishay.com 161 2322 4/5/6.. ..... Vishay BCcomponents PTC Thermistors For Overload And Overcurrent Protection TAPE SPECIFICATIONS in millimeters REEL SPECIFICATIONS in millimeters P D T Dp Dh Dp Dh 0 0.2 H1 H3 3 H2 15 o 5 o 18 d H0 W2 L W1 W0 W 30 +1 -0 77 85.6 92 356 max. D0 P0 P1 F t 22.5 T Thermistors on tape for 2322 66. 6...1/2/3. REEL DIMENSIONS in millimeters DIAMETER W1 W2 MAX. <12 42 1 56 12 46 1 60 W1 W2 Dimensions of the reel for 2322 66. 6...1/2/3. TAPE AND OTHER DEVICE DIMENSIONS IN MILLIMETERS SYMBOL body diameter D T d P P0 P1 h F h W W0 W1 W2 H1 H2 H3 H0 D0 t L DIMENSIONS PARAMETER total maximum thickness lead diameter pitch between thermistors: < 12 mm 12 mm feed hole pitch feed hole centre to lead centre component alignment lead to lead distance component alignment tape width hold down tape width hole position hold down tape position component height component body to seating plane component top to seating plane lead-wire clinch height feed hole diameter total tape thickness length of snipped lead www.vishay.com 162 TOLERANCE REMARKS see Device and Tape 0.5 Dimensions table see Thickness Dimesions table 0.6 10% 12.7 1 25.4 2 12.7 0.3 3.81 0.7 0 1.3 5 +0.6 to -0.1 0 2 18 +1 to -0.5 12.3 - 9 0.5 3.0 - see Device and Tape Dimensions table 4 1 see Device and Tape Dimensions table 16 0.5 4 0.2 0.9 - 11 - cumulative pitch error 1 mm/20 pitches guaranteed between component and tape guaranteed between component and tape For technical questions contact: nlr.europe@vishay.com with cardboard tape 0.5 0.1 mm Document Number: 29069 Revision: 10-Oct-03 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: PTCCL07H321DBC PTCCL13H321HBC PTCCL05H181DBC PTCCL05H110HBC PTCCL05H630HBC PTCCL05H190HBC PTCCL11H251HBC PTCCL05H271DBC PTCCL05H150HBC PTCCL11H321FBC PTCCL13H281HBC PTCCL05H760HBC PTCCL05H950HBC PTCCL07H141HBC PTCCL13H451FBC PTCCL05H940EBC PTCCL09H171HBC PTCCL09H101HBC PTCCL09H191HBC PTCCL05H650FBC PTCCL09H471DBC PTCCL05H131EBC PTCCL07H411DBC PTCCL09H541DBC PTCCL13H921DBC PTCCL07H111HBC PTCCL05H280HBC PTCCL05H390HBC