PLUG RECEPTACLE
SERIES
WTA = 2-row, straight-plug, w/o mounting ears WTA = 2-row, straight, receptacle, w/o mounting ears
NUMBER OF CONTACTS
10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70 10, 14, 20, 24, 26, 30, 36, 40, 44, 50, 54, 56, 60, 66, 70
TYPE OF CONTACTS
• Pin or socket contacts can be used in either plug or receptacle.
• When pin contacts are use, standard hardware orientation places the female hardware next to the #1 pin contact.
• When socket contacts are used, standard hardware or ientation places the male hardware next to the #1 socket.
PC Pin, straight, solder cup SAC Socket, straight, solder cup
PD5 Pin, straight, dip solder, .078 SAD7 Socket, straight, dip solder, .109
PD7 Pin, straight, dip solder, .109 SAD9 Socket, straight, dip solder, .140
PD9 Pin, straight, dip solder, .140 SAD11 Socket, straight, dip solder, .172
PD11 Pin, straight, dip solder, .172 SAF3 Socket, straight, flex-circuit, .050
PD13 Pin, straight, dip solder, .203 SAF6 Socket, straight, flex-circuit, .093
PD15 Pin, straight, dip solder, .234 SAF9 Socket, straight, flex-circuit, .140
PD20 Pin, straight, dip solder, .312 SAP
Socket, straight, pin ter mination, .150, connector saver
PF3 Pin, straight, flex-circuit, .050 SAW24 Socket, straight, wire wrap, .375
PF6 Pin,straight, flex circuit, .093 SAW40 Socket, straight, wire wrap, .625
PF8 Pin,straight, flex circuit, .125
PW34 Pin, straight, wire wrap, .513
PW40 Pin, straight, wire wrap. .625
TYPE OF HARDWARE
• Jackset hardware determines image of connector. Must specify image with Guide Set Hardware.
• Plug facial seal gaskets and hoods; order separately or add “Q” in par t number. Example: WTA10PD9QJ. See “Gaskets” and
“Hoods” under next tab for instructions.
JT = Turning jackset, .500 J = Fixed jackset
JTA = Tur ning Jackset, .200 JL = Fixed jackset, long
JTB = Hex turning jackset, .200
JTC = Hex turning jackset, .500
OPTIONS
• OPTION CODES: Add to the end of the part number. Example: WTA10SAD9J-D01. Call factor y for additional codes.
-443: Polarized Pin installed in contact position noted by dash number. See “Polarization” under next tab.
-444: Contact position noted by dash number is left open (to mate with -443). See “Polar ization” under next tab.
-B82: Ter mination face sealed against confor mal coating.
-D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.)
-D54: Combine B82 and D01 special codes.
-G69: Solder cups are fixed in an outward orientation, otherwise contacts can rotate.
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
W-10
22•ROW
Connectors
Cable to
Board or Panel
Examples:
WTA-WTA
PLUG: WTA 26 PC JT
RECEPTACLE: WTA 26 SAD9 JL
0005
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
W-11
EXAMPLE: WTA26SAD9JLEXAMPLE: WTA26PCJT
EXAMPLE: WTA26PD9JLEXAMPLE: WTA26SACJT
.100
.250
.187 DIA
.035 INSIDE DIA
SOLDER CUP
.100
.150
.075
.500
2-S NC
TH'D
.150 .335 .140-PD9
OR
.172-PD11 .075
.100
.100
.050 TYP
.100 TYP
.250
#2 FLAT
WASHER
#2
LOCKWASHER
±.001
.027 DIA
2-S6 NC THD
.030±.001
DIA
.130 .130
.100
.250
.100 .100
.187 DIA
.100.150
.075 .500
.035 INSIDE DIA
SOLDER CUP
.335 .130
.030±.
001 DIA
2-56
NC THD
.050 TYP
.027±.001 DIA
.100
.100 TYP
.250
.247 2-56
NC THD
.130 .150
.335
#2 FLATWASHER
#2 LOCKWASHER
.140-PD9
OR
.172-PD11
.075
.100
SIZE A B C
10 .850 .650 .400
14 1.050 .850 .600
20 1.350 1.150 .900
24 1.550 1.350 1.100
26 1.650 1.450 1.200
30 1.850 1.650 1.400
36 2.150 1.950 1.700
40 2.350 2.150 1.900
44 2.550 2.350 2.100
50 2.850 2.650 2.400
54 3.050 2.850 2.600
56 3.150 2.950 2.700
60 3.350 3.150 2.900
66 3.650 3.450 3.200
70 3.850 3.650 3.400
WTA-WTA
Dimensions
0018