Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 1
HMC599ST89 / 599ST89E
GaAs pHEMT MMIC LNA, 75 Ohm
50 - 1000 MHz
v02.0311
General DescriptionFunctional Diagram
The HMC599ST89(E) is a GaAs PHEMT High
Linearity, Low Noise Gain Block MMIC SMT amplier
covering 50 to 1000 MHz. Packaged in an industry
standard SOT89, the amplier can be used as a
cascadable 75 Ohm RF or IF gain stage as well
as a PA or LO driver with up to +19 dBm output
power. The HMC599ST89(E) offers 14 dB of gain
with a +39 dBm output IP3 at 250 MHz, and can
operate directly from a +3V or +5V supply. The
HMC599ST89(E) exhibits excellent gain and output
power stability over temperature, while requiring a
minimal number of external bias components.
High P1dB Output Power: +19 dBm
High Output IP3: +39 dBm
Low Noise Figure: 2.2 dB
Cascadable 75 Ohm I/Os
Single Bias Supply: +3V or +5V
Industry Standard SOT89 Package
Typical Applications
The HMC599ST89(E) is ideal for:
• VHF / UHF Antennas
• HDTV Receivers
• CMTS Equipment
• CATV, Cable Modem & DBS
Electrical Specications, Vdd = 5V, TA = +25° C
Parameter Min. Typ. Max. Units
Gain 50 - 500 MHz
500 - 1000 MHz
13
12
14.5
14
dB
dB
Gain Variation Over Temperature 50 - 1000 MHz 0.005 dB/ °C
Input Return Loss 50 - 500 MHz
500 - 1000 MHz
15
12
dB
dB
Output Return Loss 50 - 500 MHz
500 - 1000 MHz
25
15
dB
dB
Reverse Isolation 50 - 1000 MHz 20 dB
Output Power for 1 dB Compression (P1dB) 50 - 500 MHz 16 19 dBm
Output Third Order Intercept (IP3)
(Pout= -10 dBm per tone, 1 MHz spacing)
50 - 500 MHz
500 - 1000 MHz
39
36
dBm
dBm
Noise Figure 50 - 1000 MHz 2.2 dB
Supply Current (Idd) 100 120 140 mA
Features
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 2
Broadband Gain & Return Loss @ 3V
Gain vs. Temperature @ 3V
Input Return Loss vs. Temperature @ 3V
HMC599ST89 / 599ST89E
v02.0311 GaAs pHEMT MMIC LNA, 75 Ohm
50 - 1000 MHz
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
9
10
11
12
13
14
15
16
17
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
GAIN (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
Broadband Gain & Return Loss @ 5V
Gain vs. Temperature @ 5V
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
9
10
11
12
13
14
15
16
17
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
GAIN (dB)
FREQUENCY (GHz)
Input Return Loss vs. Temperature @ 5V
-25
-20
-15
-10
-5
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 3
HMC599ST89 / 599ST89E
v02.0311 GaAs pHEMT MMIC LNA, 75 Ohm
50 - 1000 MHz
Output Return Loss vs. Temperature @ 5V
Reverse Isolation vs. Temperature @ 5V
Noise Figure vs. Temperature @ 5V
-40
-35
-30
-25
-20
-15
-10
-5
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
REVERSE ISOLATION (dB)
FREQUENCY (GHz)
0
1
2
3
4
5
6
7
8
9
10
0 100 200 300 400 500 600 700 800 900 1000
+25C
+85C
-40C
NOISE FIGURE (dB)
FREQUENCY (MHz)
Output Return Loss vs. Temperature @ 3V
Reverse Isolation vs. Temperature @ 3V
Noise Figure vs. Temperature @ 3V
-40
-35
-30
-25
-20
-15
-10
-5
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
REVERSE ISOLATION (dB)
FREQUENCY (GHz)
0
1
2
3
4
5
6
7
8
9
10
0 100 200 300 400 500 600 700 800 900 1000
+25C
+85C
-40C
NOISE FIGURE (dB)
FREQUENCY (MHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 4
HMC599ST89 / 599ST89E
v02.0311 GaAs pHEMT MMIC LNA, 75 Ohm
50 - 1000 MHz
P1dB vs. Temperature @ 3V
IP3 vs. Temperature @ 3V IP3 vs. Temperature @ 5V
Psat vs. Temperature @ 3V
4
5
6
7
8
9
10
11
12
13
14
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
P1dB (dBm)
FREQUENCY (GHz)
6
7
8
9
10
11
12
13
14
15
16
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
Psat (dBm)
FREQUENCY (GHz)
P1dB vs. Temperature @ 5V
Psat vs. Temperature @ 5V
12
13
14
15
16
17
18
19
20
21
22
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
P1dB (dBm)
FREQUENCY (GHz)
12
13
14
15
16
17
18
19
20
21
22
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
Psat (dBm)
FREQUENCY (GHz)
16
18
20
22
24
26
28
30
32
34
36
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
IP3 (dBm)
FREQUENCY (GHz)
22
24
26
28
30
32
34
36
38
40
42
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
+25C
+85C
-40C
IP3 (dBm)
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 5
HMC599ST89 / 599ST89E
v02.0311 GaAs pHEMT MMIC LNA, 75 Ohm
50 - 1000 MHz
9
10
11
12
13
14
15
16
17
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
2.7V
3.0V
3.3V
4.5V
5.0V
5.5V
GAIN (dB)
FREQUENCY (GHz)
0
1
2
3
4
5
6
7
8
9
10
0 100 200 300 400 500 600 700 800 900 1000
2.7V
3.0V
3.3V
4.5V
5.0V
5.5V
NOISE FIGURE(dB)
FREQUENCY (MHz)
0
4
8
12
16
20
24
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
2.7V
3.0V
3.3V
4.5V
5.0V
5.5V
P1dB (dBm)
FREQUENCY (GHz)
0
4
8
12
16
20
24
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
2.7V
3.0V
3.3V
4.5V
5.0V
5.5V
P1dB (dBm)
FREQUENCY (GHz)
Noise Figure vs. Supply VoltageGain vs. Supply Voltage
P1dB vs. Supply Voltage
IP3 vs. Supply Voltage
Psat vs. Supply Voltage
16
20
24
28
32
36
40
44
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
2.7V
3.0V
3.3V
4.5V
5.0V
5.5V
IP3 (dBm)
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 6
HMC599ST89 / 599ST89E
v02.0311 GaAs pHEMT MMIC LNA, 75 Ohm
50 - 1000 MHz
Outline Drawing
Absolute Maximum Ratings
Drain Bias Voltage (Vdd) +6 Vdc
RF Input Power (RFIN) +10 dBm
Channel Temperature 175 °C
Continuous Pdiss (T = 85 °C)
(derate 9.84 mW/°C above 85 °C) 0.89 W
Thermal Resistance
(junction to ground paddle) 101.67 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC599ST89 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H599
XXXX
HMC599ST89E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H599
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Typical Supply Current vs. Vdd
Vdd (Vdc) Idd (mA)
+5 120
+3 120
NOTES:
1. PACKAGE BODY MATERIAL:
MOLDING COMPOUND MP-180S OR EQUIVALENT.
2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING.
3. LEAD PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS]
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15 mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25 mm PER SIDE.
7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 7
HMC599ST89 / 599ST89E
v02.0311 GaAs pHEMT MMIC LNA, 75 Ohm
50 - 1000 MHz
Application Circuit
Pin Descriptions
Pin Number Function Description Interface Schematic
1 IN
This pin is DC coupled.
See the application circuit for
off-chip components
3OUT RF output and DC Bias (Vdd) for the output stage.
2, 4 GND These pins and package bottom
must be connected to RF/DC ground.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 8
HMC599ST89 / 599ST89E
v02.0311 GaAs pHEMT MMIC LNA, 75 Ohm
50 - 1000 MHz
Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and package bottom should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
List of Materials for Evaluation PCB 119696 [1]
Item Description
J1 - J2 PCB Mount 75 Ohm Connector
J3 DC Pin
C1, C3 1000 pF Capacitor, 0603 Pkg.
C2 390 pF Capacitor, 0603 Pkg.
C4 2.2 µF Capacitor, Tantalum
C5 10 KpF Capacitor, 0402 Pkg.
C6 0.5 pF Capacitor, 0402 Pkg.
L1 0.9 H Inductor, 1008 Pkg.
L2, L3 2.2 nH Inductor, 0603 Pkg.
R1 665 Ohm Resistor, 0402 Pkg.
U1 HMC599ST89 / HMC599ST89E
PCB [2] 119694 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
[3] Evaluation board tuned for 900 MHz operation
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Analog Devices Inc.:
HMC599ST89E HMC599ST89ETR 119696-HMC599ST89