Q45BW13 Series Sensors
Universal voltage photoelectric sensors with isolated solid-state output
Printed in USA 09/01 53999 rev C
NOTES: i) 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q453E W/30)
ii) A model with a QD connector requires a mating cable; see page 10.
Q45BW13 Series Features
•Advanced one-piece photoelectric sensors with outstanding optical perform-
ance and extremely rugged design
•Universal supply voltage: 12 to 250V dc or 24 to 250V ac
•Opto-isolated solid-state relay output; 300 mA max. load at up to 250V ac,
250V dc
•Full line includes opposed, diffuse, retroreflective, convergent, and glass and
plastic fiber optic sensing modes
•Switchable light/dark operate
•Versatile plug-in modules available for output timing logic and/or signal
strength display
•Highly visible Power, Signal (AID™ System), and Output indicator LEDs
•Choice of prewired 2 m (6.5') or 9 m (30') unterminated cable or Mini-style
quick-disconnect fitting
•Versatile mounting options
•Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67
rating
IMPORTANT: SEE SAFETY USE WARNING ON BACK PAGE
Q45BW13 Series Opposed-Mode Emitter (E) and Receiver (R) Models
Q453E Emitter
Q45BW13R Receiver
Models Range Cable Supply
Voltage
Output
Type Excess Gain
60 m
(200')
2-wire
2m (6.5')
4-wire
2m (6.5') Universal
12 - 250V dc
or
24 - 250V ac
Isolated
SPST
Solid-state
Switch
Because of their extremely high excess gain, these opposed-mode sensors are an
excellent option for sensing in contaminated or dirty areas, and are also the best
choice for long-range sensing. Infrared, 880 nm
Q453EQ Emitter
Q45BW13RQ Receiver
3-Pin Mini-
style QD
4-Pin Mini-
style QD
Beam Pattern
1
10
100
1.0 m
3.3 ft
10 m
33 ft
100 m
330 ft
0.1 m
0.33 ft
E
X
C
E
S
S
G
A
I
N
DISTANCE
1000
Q45E/R
Opposed Mode
48 m
160 ft
60 m
200 ft
36 m
120 ft
24 m
80 ft
12 m
40 ft
0
0
0.5 m
1.0 m
1.5 m
0.5 m
1.0 m
1.5 m
0
20 in
40 in
60 in
20 in
40 in
60 in
DISTANCE
Q45E/R
Opposed Mode
Effective Beam: 13 mm
*U.S. Patent no. 4356393
LISTED
R
Q45BW13 Series
page 2
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
NOTES:
i) 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q45BW13LV W/30)
ii) A model with a QD connector requires a mating cable; see page 10.
Models Range Cable
Supply
Voltage
Output
Type Excess Gain Beam Pattern
Non-Polarized
1
10
100
1000
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
.01 m
.033 ft
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45LV
Retroreflective Mode
With BRT-3 Reflector
12 m
40 ft
15 m
50 ft
9 m
30 ft
6 m
20 ft
3 m
10 ft
0
0
25 mm
50 mm
75 mm
25 mm
50 mm
75 mm
0
1.0 in
2.0 in
3.0 in
1.0 in
2.0 in
3.0 in
DISTANCE
Q45LV
Retroreflective Mode
With BRT-3 Reflector
Polarized
1
10
100
1000
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
.01 m
.033 ft
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45LP
Retroreflective Mode
With BRT-3 Reflector
6 m
20 ft
7.5 m
25 ft
4.5 m
15 ft
3 m
10 ft
1.5 m
5 ft
0
0
25 mm
50 mm
75 mm
25 mm
50 mm
75 mm
0
1.0 in
2.0 in
3.0 in
1.0 in
2.0 in
3.0 in
DISTANCE
Q45LP
Retroreflective
Mode
With BRT-3 Reflector
Q45BW13LP
Q45BW13LPQ
0.15 to 6 m
(6" to 20')
Q45BW13LV
Q45BW13LVQ
4-wire
2 m (6.5')
4-Pin
Mini-style QD
Universal
12 - 250V dc
or
24 - 250V ac
Isolated
SPST
Solid-state
Switch
0.08 to 9 m
(3" to 30')
4-wire
2 m (6.5')
4-Pin
Mini-style QD
Universal
12 - 250V dc
or
24 - 250V ac
Isolated
SPST
Solid-state
Switch
Q45BW13 Series Retroreflective-Mode Models
The visible red sensing beam of these sensors makes them very easy to align.
Model Q45BW13LP polarizes the emitted light and filters out unwanted reflections,
making sensing possible in applications otherwise considered unsuited to retrore-
flective sensing. Performance is specified using the model BRT-3 3" reflector (see
the Accessories section of your current Banner Photoelectric Sensors catalog for
further information). Visible red, 680 nm
Non-Polarized Polarized
P
Q45BW13 Series
page 3
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Q45BW13 Series Diffuse-Mode Models
500 mm
20.0 in
400 mm
16.0 in
300 mm
12.0 in
200mm
8.0 in
100 mm
4.0 in
0
0
5 mm
10 mm
15 mm
5 mm
10 mm
15 mm
0
0.2 in
0.4 in
0.6 in
0.2 in
0.4 in
0.6 in
DISTANCE
Q45D
Diffuse Mode
Models Range Cable
Supply
Voltage
Output
Type
Excess Gain Beam Pattern
Short Range
Q45BW13DL
Q45BW13DLQ
1. 8 m
(6')
4-wire
2 m (6.5')
4-Pin
Mini-style QD
Universal
12 - 250V dc
or
24 - 250V ac
1
10
100
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
1.0 mm
0.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45D
Diffuse Mode
2.4 m
8 ft
3.0 m
10 ft
1.8 m
6 ft
1.2 m
4 ft
0.6 m
2 ft
0
0
25 mm
50 mm
75 mm
25 mm
50 mm
75 mm
0
1.0 in
2.0 in
3.0 in
1.0 in
2.0 in
3.0 in
DISTANCE
Q45DL
Diffuse Mode
Long Range
Q45BW13DX
Q45BW13DXQ
3 m
(10')
4-wire
2 m (6.5')
4-Pin
Mini-style QD
1
10
100
1000
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
.01 m
.033 ft
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45DL
Diffuse Mode
Q45BW13D
Q45BW13DQ
450 mm
(18")
4-wire
2 m (6.5')
4-Pin
Mini-style QD
Universal
12 - 250V dc
or
24 - 250V ac
Isolated
SPST
Solid-state
Switch
Performance based on 90% reflectance white test card
Isolated
SPST
Solid-state
Switch
Universal
12 - 250V dc
or
24 - 250V ac
3.0 m
10 ft
2.4 m
8 ft
1.8 m
6 ft
1.2 m
4 ft
0.6 m
2 ft
0
0
25 mm
50 mm
75 mm
25 mm
50 mm
75 mm
0
1.0 in
2.0 in
3.0 in
1.0 in
2.0 in
3.0 in
DISTANCE
Diffuse Mode
Q45DX
High Power
1
10
100
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
0.01 m
0.033 ft
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45DX
Diffuse Mode
Isolated
SPST
Solid-state
Switch
Infrared, 880 nm
These diffuse-mode models detect objects by sensing the reflection of their own emitted light.
Ideal for use when the reflectivity and profile of the object to be sensed are sufficient to return a
large percentage of emitted light back to the sensor. Model Q45BW13DX is the first choice for
diffuse-mode applications when there are no background objects to falsely return light.
Q45BW13 Series
page 4
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
NOTES:
i) 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q45BW13CV W/30)
ii) A model with a QD connector requires a mating cable; see page 10.
Visible red, 680 nm
These sensors are ideal for reflective sensing of very small parts or profiles, and can accurately
sense the position of parts approaching from the side. Will ignore all but highly reflective objects
that are outside the sensing range.
Q45BW13 Series Convergent-Mode Models
190 mm
7.5 in
150 mm
6.0 in
113 mm
4.5 in
75 mm
3.0 in
38 mm
1.5 in
0
0
1.2 mm
2.5 mm
3.8 mm
1.2 mm
2.5 mm
3.8 mm
0
0.05 in
0.10 in
0.15 in
0.05 in
0.10 in
0.15 in
DISTANCE
Q45CV
Convergent Mode
Models Focus Cable
Supply
Voltage
Output
Type
Excess Gain Beam Pattern
Q45BW13CV
Q45BW13CVQ
38 mm
(1.5")
Spot Size
at Focus:
1.3 mm
(0.05")
4-wire
2 m (6.5')
4-Pin
Mini-style QD
Universal
12 - 250V dc
or
24 - 250V ac
Isolated
SPST
Solid-state
Switch
1
10
100
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
1 mm
.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45CV
Convergent Mode
190 mm
7.5 in
150 mm
6.0 in
113 mm
4.5 in
75 mm
3.0 in
38 mm
1.5 in
0
0
1.2 mm
2.5 mm
3.8 mm
1.2 mm
2.5 mm
3.8 mm
0
0.05 in
0.10 in
0.15 in
0.05 in
0.10 in
0.15 in
DISTANCE
Q45CV4
Convergent Mode
Q45BW13CV4
Q45BW13CV4Q
100 mm
(4")
Spot Size
at Focus:
1.5 mm
(0.06")
4-wire
2 m (6.5')
4-Pin
Mini-style QD
Universal
12 - 250V dc
or
24 - 250V ac
Isolated
SPST
Solid-state
Switch
1
10
100
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
1 mm
.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45CV4
Convergent Mode
Performance based on 90% reflectance white test card
1
10
100
10 mm
0.4 in
100 mm
4 in
1000 mm
40 in
1.0 mm
0.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45FV
Opposed Mode
IT23S fibers
IT13S fibers
300 mm
12 in
250 mm
10 in
200 mm
8 in
150 mm
6 in
100 mm
4 in
0
0
10 mm
20 mm
30 mm
10 mm
20 mm
30 mm
0
0.4 in
0.8 in
1.2 in
0.4 in
0.8 in
1.2 in
DISTANCE
Q45FV
Opposed Mode
IT23S Fibers
IT13S Fibers
2.0 m
75 in
1.6 m
60 in
1.2 m
45 in
0.8 m
30 in
0.4 m
15 in
0
0
50 mm
100 mm
150 mm
50 mm
100 mm
150 mm
0
2.0 in
4.0 in
6.0 in
2.0 in
4.0 in
6.0 in
DISTANCE
Q45F
Opposed Mode
IT23S Fibers
IT13S Fibers
BP Q45F opp.eps
page 5
Q45BW13 Series
These models are an excellent choice for glass fiber optic applications where
faster sensor response is not important. Their high excess gain means that
opposed individual fibers can operate reliably in many very hostile environments.
Also, special miniature bifurcated fiber optic assemblies with bundle sizes as
small as .5 mm (.020") dia. may be used successfully for diffuse-mode sensing
when using sensor model Q45BW13F(Q). For more information on compatible
glass fiber optics, refer to your current Banner Photoelectric Sensors catalog.
Q45BW13 Series Glass Fiber-Optic Models
Models Range Cable
Supply
Voltage
Output
Type
Excess Gain Beam Pattern
Infrared, 880 nm
1
10
100
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
0.01 m
0.03 ft
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45F
Opposed Mode
IT23S fibers
IT13S fibers
Diffuse mode performance based on 90% reflectance white test card
Q45BW13F
Q45BW13FQ
Range
varies by
sensing
mode and
fiber optics
used
4-wire
2 m (6.5')
4-Pin
Mini-style QD
Universal
12 - 250V dc
or
24 - 250V ac
Isolated
SPST
Solid-state
Switch
Infrared, 880 nm and Visible Red, 650 nm
Q45BW13FV
Q45BW13FVQ
Range
varies by
sensing
mode and
fiber optics
used
4-wire
2 m (6.5')
4-Pin
Mini-style QD
Universal
12 - 250V dc
or
24 - 250V ac
Isolated
SPST
Solid-state
Switch
Visible Red, 650 nm
1
10
100
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
1 mm
0.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45F
Diffuse Mode
BT23S Fiber
BT13S Fiber
125 mm
5 in
100 mm
4 in
75 mm
3 in
50 mm
2 in
25 mm
1 in
0
0
1.3 mm
2.5 mm
3.8 mm
1.3 mm
2.5 mm
3.8 mm
0
0.05 in
0.10 in
0.15 in
0.05 in
0.10 in
0.15 in
DISTANCE
Q45F
Diffuse Mode
BT23S Fiber
BT13S Fiber
1
10
100
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
1 mm
0.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45FV
Diffuse Mode
BT23S Fiber
BT13S
Fiber
25 mm
1.0 in
20 mm
0.8 in
15 mm
0.6 in
10 mm
0.4 in
5 mm
0.2 in
0
0
1.0 mm
2.0 mm
3.0 mm
1.0 mm
2.0 mm
3.0 mm
0
0.04 in
0.08 in
0.12 in
0.04 in
0.08 in
0.12 in
DISTANCE
Q45FV
Diffuse Mode
BT23S Fiber
BT13S Fiber
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Q45BW13 Series
page 6
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
NOTES:
i) 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q45BW13FP W/30)
ii) A model with a QD connector requires a mating cable; see page 10.
Visible red, 660 nm
Lower in cost than glass fiber optics, plastic fiber optics are ideal for use in situ-
ations where environmental conditions allow (for example, low levels of acids,
alkalis, and solvents). Most are easily cut to length in the field, and are available
in a variety of sensing end styles. For more information on compatible plastic
fiber optics, refer to your current Banner Photoelectric Sensors catalog.
Q45BW13 Series Plastic Fiber-Optic Models
Models Range Cable
Supply
Voltage
Output
Type
Excess Gain Beam Pattern
Q45BW13FP
Q45BW13FPQ
1
10
100
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
1 mm
0.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45FP
Opposed Mode
PIT46U Fibers
PIT26U Fibers
125 mm
5.0 in
100 mm
4.0 in
75 mm
3.0 in
50 mm
2.0 in
25 mm
1.0 in
0
0
15 mm
30 mm
45 mm
15 mm
30 mm
45 mm
0
0.6 in
1.2 in
1.8 in
0.6 in
1.2 in
1.8 in
DISTANCE
Q45FP
Opposed Mode PIT46U Fibers
PIT26U Fibers
Diffuse mode performance based on 90% reflectance white test card
Range
varies by
sensing
mode and
fiber optics
used
4-wire
2 m (6.5')
4-Pin
Mini-style QD
Universal
12 - 250V dc
or
24 - 250V ac
Isolated
SPST
Solid-state
Switch
1
10
100
1 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
0.1 mm
0.004 in
1000
E
X
C
E
S
S
G
A
I
N
Q45FP
Diffuse Mode
PBT46U Fiber
PBT26U Fiber 50 mm
2.0 in
40 mm
1.6 in
30 mm
1.2 in
20 mm
0.8 in
10 mm
0.4 in
0
0
6 mm
12 mm
18 mm
6 mm
12 mm
18 mm
0
0.25 in
0.50 in
0.75 in
0.25 in
0.50 in
0.75 in
DISTANCE
Q45FP
Diffuse Mode
PBT46U Fiber
Q45BW13 Series
page 7
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Q45BW13 Series Specifications
Supply Voltage and Current Universal voltage: 24 to 250V ac, 50/60 Hz or 12 to 250V dc (1.5 watts maximum)
Supply Protection Circuitry Protected against transient voltages. DC hookup is without regard to polarity.
Output Configuration All models except emitters: Optically isolated SPST solid-state switch
Output Rating 250V ac, 250V dc, 300 mA
Output saturation voltage: 3V at 300 mA, 2V at 15 mA
Off-state leakage current: <50 microamps
Inrush current: 1 amp for 20 milliseconds, non-repetitive
Output Protection Circuitry Protected against false pulse on power-up
Output Response Time Opposed mode: 2 milliseconds on, 1 millisecond off
All other sensing modes: 2 milliseconds on/off
(NOTE: 100 millisecond delay on power-up. Output is non-conducting during this time.)
Repeatability Opposed mode: 0.25 milliseconds
All other sensing modes: 0.5 milliseconds
Response time and repeatability specifications are independent of signal strength.
Adjustments Light/Dark Operate select switch; and multi-turn Sensitivity control on top of sensor beneath a transparent
o-ring-sealed Lexan®cover, allows precise sensitivity setting (turn clockwise to increase gain). Optional logic
and logic/display modules have adjustable timing functions (see page 10).
Indicators Indicator LEDs are clearly visible beneath a raised transparent Lexan®dome on top of the sensor.
Power (green) LED lights whenever 24 to 250V ac, or 12 to 250V dc power is applied
Signal (red) AID™ System LED lights whenever the sensor sees its modulated light source, and pulses at a
rate proportional to the strength of the received light signal
Load (yellow) LED lights whenever the output relay is energized
Optional 7-element LED signal strength display module
Construction Molded reinforced thermoplastic polyester housing, o-ring-sealed transparent Lexan®cover, molded acrylic
lenses, and stainless steel hardware. Q45s are designed to withstand 1200 psi washdown. The base of
cabled models has a 1/2" NPS integral internal conduit thread.
Environmental Rating NEMA 6P, IEC IP67
Connections PVC-jacketed 2 m (6.5') or 9 m (30') unterminated cables, or Mini-style quick-disconnect (QD) fittings are
available (“Q”- suffix models). QD cables are ordered separately. See page 10.
Operating Conditions Temperature: -25° to +55° C (-13° to +131°F)
Maximum relative humidity: 90% at 50°C (non-condensing)
Application Notes Optional output timing modules are available. See page 10 for more information.
Output is not short-circuit protected. Exercise care when making wiring connections.
Lexan®is a registered trademark of General Electric Co.
Certifications
LISTED
R
Q45BW13 Series
page 8
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Q45BW13 Series Dimensions
54.1 mm*
(2.13")
44.5 mm
(1.75")
69.0 mm
(2.72")
87.6 mm
(3.45")
Internal Thread
(1/2–14NPSM)
External Thread
M30 X 1.5
30.0 mm
(1.18")
ø 6.1 (0.24")
2m (6.5') Cable
7.1 mm
(0.28")
4.5 mm (#10) Screw
Clearance (2)
50.8 mm
(2.00")
6.4 mm (0.25")
Lens Centerline
Mounting Nut is Supplied
*57.9 mm (2.28") for LP models
Q45BW13 Series Sensors – Opposed, Retro, and Diffuse Sensing Modes
(model suffix E, R, D, DL, DX, LP & LV)
Convergent Sensing Mode
(model suffix CV & CV4)
Glass Fiber Optic
(model suffix F and FV)
Cabled
87.6 mm
(3.45")
External Thread
M30 X 1.5
Mini-style QD Connector
14 mm (0.6")
61.7 mm
(2.43")
50.8 mm
(2.00")
Lens
Centerline
60.5 mm
(2.38")
59.8 mm
(2.35")
Quick-Disconnect
Plastic Fiber Optic
(model suffix FP)
Q45BW13 Series
page 9
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Q45BW13 Series Indicators and Controls
Status indicator LEDs for Power, Signal and Output are clearly visible
beneath a raised dome in the sensor’s transparent o-ring-sealed Lexan®
cover. The Power indicator lights whenever power is applied to the sensor.
The Signal LED lights whenever the sensor sees its modulated light
source, and pulses at a rate proportional to the strength of the received
light signal; this is the AID™ Alignment Indicating Device*. The Output
indicator lights whenever the sensor’s output relay is energized. This indi-
cator is especially useful when a timing logic module is used and Signal
and Output conditions are not concurrent.
Also located beneath the sensor’s o-ring-sealed cover are controls for
light/dark operate selection and Sensitivity adjustment.
* US patent no. 4356393
Figure 1. Indicators and controls on the Q45BW13
series sensors
Q45BW13 Sensors with Attached Cable Q45BW13 Sensors with Quick-Disconnect
4-Pin Mini-Style ( model suffix Q)
Q453E Emitter with Attached Cable Q453EQ Emitter with Quick-Disconnect
3-Pin Mini-Style
bu
bk
wh Isolated
Solid-state
SPST Switch
bn
24 - 250V ac or 12 - 250V dc*
bu
wh
bn
24 - 250V ac or 12 - 250V dc*
bk
Isolated
Solid-state
SPST Switch
bn
bu
24 - 250V ac or 12 - 250V dc*
bn
bk
bu 24 - 250V ac or 12 - 250V dc*
Q45BW13 Series Hookups
*NOTE: Connection of dc power is without regard to polarity.
Quick-Disconnect (QD) Option
AC Q45BW13 Series sensors are sold with either a 2 m (6.5') or a 9 m (30') attached PVC-covered cable, or with a 3-pin Mini-
style (opposed mode emitter) or 4-pin Mini-style Quick-Disconnect (QD) cable fitting.
Mini-style QD sensors are identified by the suffix “Q” in their model number suffix. Mating cables for QD Q45BW13 sensors
are specified on page 10.
Q45BW13 Series
page 10
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Mini-Style Quick-Disconnect Cables
Cable: PVC jacket, polyurethane connector body, nylon coupling nut
Conductors: 18 AWG high-flex stranded, PVC insulation, gold plated contacts
Temperature: -40 to +80°C (-40 to +176°F)
Voltage Rating: 250V ac/300V dc
Black Wire
Blue Wire
Brown Wire
White Wire
3-Pin
Female
Pin-out
Straight
MBCC-306
MBCC-312
MBCC-330
2 m (6.5')
4 m (12')
9 m (30')
4-Pin
Female
Pin-out
Straight
Style
MBCC-406
MBCC-412
MBCC-430
Brown Wire
Blue Wire
Black Wire
2 m (6.5')
4 m (12')
9 m (30')
Model Length Dimensions Pin-Out (Female View)
Accessories
Retroreflective Targets
Banner offers a wide selection of high-qualitity retroreflective targets. See the Accessories
section of your current Banner Photoelectric Sensors catalog for complete information.
NOTE: Polarized sensors require corner cube type retroreflective targets only. Non-polarized
sensors may use any retroreflective target.
45LM58
45LM58D
45LMD
Programmable output timing logic
Programmable output timing logic plus signal strength display
Signal strength display only (no timing function)
Q45 sensors easily accept the addition of output timing logic and signal strength display functions. Display modules have a seven-element dis-
play which gives a more precise indication of excess gain than does the AID™ system LED that is standard on Q45 sensors. The modules list-
ed below may be used with all Q45BW13 Series sensors. See the data sheet packed with the module for more information.
Model Logic and/or Display Function
Output Timing Logic and Signal Strength Display Modules
Q45BW13 Series
page 11
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Mounting Brackets
Model Description Dimensions
56.0 mm
(2.20")
63.0 mm
(2.48")
13.5 mm (0.53")
45.0 mm
(1.77")
2.5 mm
(0.10")
31.5 mm
(1.24")
Nut Plate
13 mm
(0.5")
M5 x 0.8 x 80 mm
Screw (2)
SMB30C • 30 mm split clamp, black PBT bracket
• Stainless steel mounting hardware included
50.8 mm
(2.00")
58.7 mm
(2.31")
66.5 mm
(2.62")
30.0 mm
(1.18")
29.0 mm
(1.14")
12.7 mm
(0.50")
SMB30SC • 30 mm swivel, black PBT bracket
• Stainless steel mounting hardware included
57.2 mm
(2.25")
57.2 mm
(2.25")
34.9 mm
(1.38")
ø 6.4 mm
(0.25" dia.)
ø 30.15 mm
(1.187" dia.)
25.4 mm
(1.00")
35.1 mm
(1.38")
25.4 mm
(1.00") ø 5.1 mm
(0.20" dia.)
25.4 mm
(1.00")
6.4 mm
(0.25")
25.4 mm
(1.00")
57.0 mm
(2.25")
69.9 mm
(2.75")
7.1 mm
.28 x 90° (2 Slots)
R 25.4 mm
(1.00")
SMB30MM
• 30 mm, 11-gauge, stainless steel bracket
with curved mounting slots for versatility
and orientation
• Clearance for M6 (1/4") hardware
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • E-mail: sensors@bannerengineering.com
Q45BW13 Series
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any
other warranty either expressed or implied.
WARNING . . . Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applica-
tions. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner
Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
!