PI74AVC+16836
2.5V 20-Bit Universal Bus
Driver with 3-State Outputs
3PS8511E 10/17/08
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345
Recommended Operating Conditions(1)
Notes:
1. All unused inputs must be held at VCC or GND to ensure proper device operation.
.niM.xaMstinU
V
CC
egatloVylppuS gnitarepO 56.16.3
V
ylnonoitneterataD 2.1
V
HI
egatloVtupnIlevel-hgiHV
CC
V2.1=V
CC
V
CC
V59.1otV56.1=x56.0V
CC
V
CC
V7.2otV3.2=7.1
V
CC
V6.3otV3=2
V
LI
egatloVtupnIlevel-woLV
CC
V2.1=dnG
V
CC
V59.1otV56.1= x53.0V
CC
V
CC
V7.2otV3.2=7.0
V
CC
V6.3otV3=8.0
V
I
egatloVtupnI 06.3
V
O
egatloVtuptuO etatSevitcA 0V
CC
etatS-306.3
I
HO
tnerructuptuolevel-hgiH V
CC
V59.1otV56.1= 6–
Am
V
CC
V7.2otV3.2= 21–
V
CC
V6.3otV3=42–
I
LO
tnerructuptuolevel-woL V
CC
V59.1otV56.1= 6
V
CC
V7.2otV3.2= 21
V
CC
V6.3otV3=42
ΔtΔetarllafroesirnoitisnarttupnIv V
CC
V6.3otV56.1=5V/sn
T
A
erutarepmetria-eerfgnitarepO 04–58C°
Maximum Ratings
(Above which useful life may be impaired. For user guidelines, not tested.)
Supply voltage range, VCC ............................................ –0.5V to +4.6V
Input voltage range, VI.................................................. –0.5V to +4.6V
Voltage range applied to any output in the
high-impedance or power-off state, VO(1) ................... –0.5V to +4.6V
Voltage range applied to any output in the
high or low state, VO(1,2) .......................................–0.5V to VCC +0.5V
Input clamp current, IIK (VI <0) ................................................... –50mA
Output clamp current, IOK (VO <0) .............................................. –50mA
Continuous output current, IO................................................... ±50mA
Continuous current through each VCC or GND........................ ±100mA
Package thermal impedance, θJA(3): ........................................... 64°C/W
Storage Temperature range, Tstg .................................... –65°C to 150°C
Notes:
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the device.
This is a stress rating only and functional operation of the
device at these or any other conditions above those
indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
1. Input & output negative-voltage ratings may be exceeded
if the input and output curent rating are observed.
2. Output positive-voltage rating may be exceeded up to 4.6V
maximum if the output current rating is observed.
3. The package thermal impedance is calculated in accor-
dance with JESD 51.