F2212IN BK015 - ALPHA - Product.Network

Customer Specification

PART NO. FIT-221-2IN

Construction

Applicable Specifications

Environmental

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

1) Tubing Type Heat Shrinkable Tubing

2) Tubing Material Cross Linked Polyolefin

3) Minimum Supplied ID(In) 2.000

4) Maximum Recovered ID (In) 1.000

5) Nominal Recovered Wall Thickness(In) 0.045

6) Color(s) BLACK, WHITE, CLEAR, RED, YELLOW, BLUE,

GREEN, ORANGE

1) UL Standard 224 (Except Clear) 600V

2) CSA International Standard 198 (Except Clear) 600V

3) Other AMS-DTL-23053/5 Class 1 (Except

Clear)

AMS-DTL-23053/5 Class 2 (Clear

Only)

1) EU Directive 2011/65/EU(RoHS2):

All materials used in the manufacture of this part are in compliance with

European Directive 2011/65/EU regarding the restriction of use of certain

hazardous substances in electrical and electronic equipment. Consult Alpha

Wire's web site for RoHS C of C.

2) REACH Regulation (EC 1907/2006):

This product does not contain Substances of Very High Concern (SVHC)

listed on the European Union's REACH candidate list in excess of 0.1%

mass of the item. For up-to-date information, please see Alpha's REACH

Properties

Other

SVHC Declaration.

3) California Proposition 65: The outer surface materials used in the manufacture of this part meet the

requirements of California Proposition 65.

Physical & Mechanical Properties

1) Temperature Range -55 to 135°C

2) Shrink Ratio Approximately 2:1

3) Full Recovery Temperature 121°C

4) Minimum Shrink Temperature 90°C

5) Tensile Strength 1500psi, Min ASTM D638

6) Elongation 200%, Min ASTM D638

7) Low Temperature Flex(-55°C) no cracking AMS-DTL-23053

8) Heat Shock(250°C,4hrs) no cracking AMS-DTL-23053

9) Secant Modulus 2.5x10 4 psi, Min ASTM D882

10) Longitudinal Change +/-5% AMS-DTL-23053

11) Specific Gravity(Colors) 1.35, Max ASTM D792

Specific Gravity(Clear) 1.00, Max

12) Shelf Life 5 Years @ 18 to 35°C

Electrical Properties

1) Dielectric Strength 500 V/mil, Min ASTM D876

2) Volume Resistivity 1x10 14 ohm-cm, Min ASTM D876

Chemical Properties

1) Water Absorption 0.50%, Max ASTM D570

2) Corrosion(0°C,16hrs) no corrosion AMS-DTL-23053

3) Fluid Resistance(23°C,24 Hrs) 1000 PSI, Min AMS-DTL-23053

4) Fungus Resistance Pass AMS-DTL-23053

5) Vacuum Outgassing - CVCM 0.10%, Max ASTM E595

6) Halogen Free No

7) Lead Free Yes

Packaging

1) 250X4 FT FIT 4X4: 4 x 4 x 49 Continuous length

2) 125 FT CR19-3.5: 19.75 x 3.5 x 8 Max. 3 pieces/Min length

13 FT.

3) 5X4 FT FIT 3X3: 3.25 x 3.25 x 49 Continuous length

4) 2X6 IN PLASTIC BAG Continuous length

Notes

1) Orange available for 1/2 - 150 ft, 3/4 - 250 ft, 1IN - 250 ft, 11/2IN - 125Ft and 2IN - 125 ft sizes.



www.alphawire.com

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742)

Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure there accuracy at the time of publication,

information and specifications described herein are subject to errors or omissions and to changes without notice, and

the listing of such information and specifications does not ensure product availability.

Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties,

whether express, statutory or implied. In no event will Alpha be liable for any damages (including consequential,

indirect, incidental, special, punitive, or exemplary) whatsoever, even if Alpha had been advised of the possibility of

such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection

with the use, or inability to use, the information or specifications described herein.

ALPHA WIRE - CONFIDENTIAL AND PROPRIETARYNotice to persons receiving this document and/or technical

information. This document is confidential and is the exclusive property of ALPHA WIRE, and is merely on loan and

subject to recall by ALPHA WIRE at any time. By taking possession of this document, the recipient acknowledges

and agrees that this document cannot be used in any manner adverse to the interests of ALPHA WIRE, and that no

portion of this document may be copied or otherwise reproduced without the prior written consent of ALPHA WIRE. In

EU/China ROHS CERTIFICATE OF COMPLIANCE

To Whom It May Concern:

Alpha Wire Part Number: FIT-221-2IN

FIT-221-2IN, RoHS-Compliant Commencing With 12/1/2004 Production

Note: all colors and put-ups

This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the

European Parliament, better known as the RoHS Directive (commonly known as RoHS 2), with regards to restrictions of the use

of certain hazardous substances used in the manufacture of electrical and electronic equipment. This certification extends to

amending Directive 2015/863/EU which expanded the list of restricted substances to 10 items (commonly known as RoHS 3) The

reader is referred to these Directives for the specific definitions and extents of the Directives. No Exemptions are required for

RoHS Compliance on this item. Additionally, Alpha certifies that the listed part number is in compliance with China RoHS

“Marking for Control of Pollution by Electronic Information Products” standard SJ/T 11364-2014.

Substance Maximum Control Value

Lead 0.1% by weight (1000 ppm)

Mercury 0.1% by weight (1000 ppm)

Cadmium 0.01% by weight (100 ppm)

Hexavalent Chromium 0.1% by weight (1000 ppm )

Polybrominated Biphenyls (PBB) 0.1% by weight (1000 ppm)

Polybrominated Diphenyl Ethers (PBDE) ,

Including Deca-BDE 0.1% by weight (1000 ppm)

Bis(2-ethylhexyl) phthalate (DEHP) 0.1% by weight (1000 ppm)

Butyl benzyl phthalate (BBP) 0.1% by weight (1000 ppm)

Dibutyl phthalate (DBP) 0.1% by weight (1000 ppm)

Diisobutyl phthalate (DIBP) 0.1% by weight (1000 ppm)

The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief

at the date of its release. The information provided is designed only as a general guide for the safe handling, storage, and any

other operation of the product itself or the one that it will become part of. The intent of this document is not to be considered a

warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for

determining the applicability of legislation and regulations based on their individual usage of the product.

Authorized Signatory for the Alpha Wire:

Dave Watson, Director of Engineering & QA 4/23/2021

Alpha Wire

711 Lidgerwood Ave.

Elizabeth, NJ 07207

Tel: 1-908-925-8000