Surface Mount Dual Matched MMIC Amplifier DC-1 GHz Product Features * Two matched 50-ohm amplifiers in one package * InGaP HBT IF and RF amplifier * Frequency range DC to 1 GHz * High gain, 25.1 dB typ. at 0.1 GHz * Up to +19 dBm typ. output power at 0.1 GHz * High IP3, +36 dBm at 0.1 GHz * Low noise figure, 2.7 dB typ. * Low thermal resistance * Transient protected * Useable as balanced and push pull amplifier * Protected by US Patent 6,943,629 MERA-7456+ CASE STYLE: DL1020 PRICE: $4.70 ea. QTY. (20) +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Typical Applications * Cellular * CATV * UHF/VHF communications * Receivers & transmitters General Description MERA-7456+ is a dual matched wideband amplifier offering high dynamic range. It has repeatable performance from lot to lot. It is enclosed in a 6.0 x 4.9 mm MCLP plastic package. MERA-7456+ uses Darlington configuration and is fabricated using InGaP HBT technology. Expected MTBF at 85C case temperature is 300 years for the entire device (A1 and A2). 8 7 RF OUT & DC IN simplified schematic (each of A1, A2) and pin description 5 6 GND GND RF OUT & DC IN RF-OUT and DC-IN RF IN A1 RF IN GROUND Function 1 Pin Number A2 GND GND 2 3 RF IN 4 Description RF IN, A1 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN, A1 8 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in "Recommended Application Circuit". RF IN, A2 4 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN, A2 5 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in "Recommended Application Circuit". GND 2,3,6,7 & paddle Connections to ground. Use via holes as shown in "Suggested Layout for PCB Design" to reduce ground path inductance for best performance. Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. REV. E M120653 MERA-7456+ 130624 Page 1 of 4 MERA-7456+ Monolithic InGaP HBT MMIC Amplifier Electrical Specifications at 25C and 80mA, unless noted (Specifications (other than Matching) are for each of the two matched amplifiers in the package.) Parameter Min. Frequency Range* Typ. DC Gain f=0.1 GHz f=1 GHz Max. Units 1 GHz 25.1 20 22.5 f=2 GHz 18.6 f=3 GHz 14.2 f=4 GHz 9.4 Input Return Loss f=DC to 1 GHz 17.5 dB Output Return Loss f=DC to 1 GHz 9.5 dB Output Power @ 1 dB compression f=0.1 GHz Output IP3 Noise Figure 18 dB 19 f=1 GHz 18.2 f=2 GHz 14.4 f=0.1 GHz 36 f=0.5 GHz 35 f=1 GHz 32 f=DC to 1 GHz 2.7 f=DC to 1 GHz 0.1 f=1 to 4 GHz 0.1 f=DC to 1 GHz 0.6 f=1 to 4 GHz 1.0 dBm dBm dB Matching between A1, A22 Amplitude Unbalance Phase Unbalance Recommended Device Operating Current 0.3 deg. 80 Device Operating Voltage 4.3 4.8 dB mA 5.3 V Device Voltage Variation vs. Temperature at 80 mA -3.1 mV/C Device Voltage Variation vs. Current at 25C 2.8 mV/mA Thermal Resistance, junction-to-case , A1 or A2 120 C/W 1 *Guaranteed specification DC-1 GHz. Low frequency cut off determined by external coupling capacitors. Absolute Maximum Ratings Parameter Ratings Operating Temperature -45C to 85C Storage Temperature -55C to 100C Operating Current 130mA Power Dissipation 700mW Input Power 10dBm Note: Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation. 1 Case is defined as ground paddle. See application note AN-60-032 for adequate heat sinking of paddle. 2 For test method, see application note AN-60-032. Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. Page 2 of 4 MERA-7456+ Monolithic InGaP HBT MMIC Amplifier Product Marking MCL 7456 index over pin 1 Markings in addition to model number designation may appear for internal quality control purposes. Additional Detailed Technical Information Additional information is available on our web site. To access this information enter the model number on our web site home page. Performance data, graphs, s-parameter data set (.zip file) Case Style: DL1020 Plastic package, exposed paddle, lead finish: tin/silver/nickel Tape & Reel: F68 Standard quantities available on reel 7" reels with 20, 50, 100, 200, 500 or 1K devices. 13" reels with 2000, 4000 devices. Suggested Layout for PCB Design: PL-164 Evaluation Board: TB-293+ Environmental Ratings: ENV08T2 Recommended Application and Biasing Circuit Rbias R BIAS Vcc RFC (opt) RF IN1 1 RF IN2 4 8 A1 RF OUT1 Vd RF OUT2 Vd A2 5 2,3,6,7 & PADDLE RFC (opt) Rbias Vcc "1%" Res. Values (ohms) for Optimum Biasing 7 8 9 10 11 12 13 14 15 28.7 41.2 53.6 66.5 78.7 90.9 102 115 127 Vcc Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. Page 3 of 4 MERA-7456+ Monolithic InGaP HBT MMIC Amplifier ESD Rating Human Body Model (HBM): Class 1C (1000 v to < 2000 v) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M2 (100 v to < 200 v) in accordance with ESD STM 5.2-1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020C No. Test Required Condition Standard Quantity 1 Visual Inspection Low Power Microscope Magnification 40x MIP-IN-0003 (MCT spec) 114 units 2 Electrical Test Room Temperature SCD (MCL spec) 114 units 3 SAM Analysis Less than 10% growth in term of delamination J-Std-020C (Jedec Standard) 114 units 4 Moisture Sensitivity Level 1 Bake at 125C for 24 hours Soak at 85C/85%RH for 168 hours Reflow 3 cycles at 250C peak J-Std-020C (Jedec Standard) 114 units MSL Test Flow Chart Start Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260C Soak 85C/85RH 168 hours Bake at 125C, 24 hours Visual Inspection Electrical Test SAM Analysis Mini-Circuits (R) ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine For detailed performance specs & shopping online see web site (R) Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp. Page 4 of 4