rev wines pat Grounding Cords Top: 3m Standard CordJ4319 Middle: 2m Standard Cord J4222 Bottom: 2m Light Cord J4511 Popular Cord Terminations (IN Ni \a \Wd CA) We manufacture a comprehensive range of straight and coiled cords. All socket-tvpe terminations are injection moulded and all contain as standard a 0.5 watt 1.0 megohm +/-5% resistor. This ensures that a resistor is always in closest proximity to the grounded item as is specified in EN 100 015-1. Banana plug terminations are also injection moulded but do not contain a resistor. A strain-relief is built in at all terminations. We recommend the use of cords with a socket each end as it is the potentially safer termination. The cords can withstand a DC voltage of 500 volts for at least six minutes. Each cord is marked with a lot and date code. Note: If you need additional protection against exposed high voltages we manufacture cords with greater in-built electrical resistance. Also, other terminations such as 7mm sockets, bulldog clips or spade terminals can be made. Standard Coiled Cord The cord is made of single core seven ends duplex tinsel PU insulated in black. It is available in two lengths - 250mm unextended/2m extended and 325mm unextended/3m extended both with 50 to 100mm straight tails. Weight of the shorter cord is approx. 30g whilst the longer is 40g. The end-to-end resistance of a complete cord is IMQ +5% for cords with one socket and one banana plug and 2MQ +5% for cords with two sockets. Listed below are the most popular terminations. Many others are available to order. 2m Cord 3m Cord TERMINATIONS 4mm 10mm 4mm 10mm socket socket socket socket 4mm plug J4211 J4221 J4311 J4321 4mm socket J4210 J4224 J4310 J4324 10mm socket J4224 J4222 J4324 J4322 Light Weight Coiled Cord The lighter weight of this cord is welcomed by some operatives who find that it tugs less at the wrist and reduces fatigue. Its construction, comprising seven ends simplex tinned copper tinsel, single sheath PVC insulated reduces overall weight (at 13g) by over 50% compared with the standard cord. End-to-end resistance is between 0.9 megohm and 1.1 megohm. The resistor has a power rating of 0.25 watt. It will withstand 500 volts DC for six minutes. The working length is 1.8m maximum. Length at rest is approx. 190mm plus tails of 90mm each. Code Unit Light weight cord with 4mm socket/4mm banana plug J4511 Telephone: 0462 672005 Fan; 0462 670440 17