NOTES:
1. LEDs Left/Right: G = green; Y = yellow.
2. Add suffix “T” for Tape & Reel option (e.g. J0C-0004T).
3. Extended Temperature: -40° to 85° C
Features and Benefits:
RoHS peak reflow temperature rating 245°C
J0C SMT product, reduced size and low cost alternative
to JV series
Electrical Performance Summary:
Meets IEEE 802.3 specification
High performance for maximum EMI suppression
Minimum 1500Vrms isolation per IEEE 802.3 requirement
Mating Force Unmating Force Plug to Jack
Part Number (MAX) (MAX) Durability Retention (MIN)
J0C/JV/J3 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs
.
RJ45 Durability Testing Rating
Description:
10/100Base-TX surface mount RJ45 single port (1x1) Tab-UP/DOWN with or without LEDs Integrated Magnetics
Connector, designed to support applications such as: Set Top Box and Network Interface Cards (NIC).
JV0
J0C
SMT Contacts
J30
Pu l s e Ja c k TM
Surface Mount 1x1
Notes: 1. Connector dimensions comply with FCC part 68 dimension requirements.
2. MSL=Moisture Sensitivity Level rating: 1-5 (highest rating = 1, lowest rating = 5).
3. (X)=30µ inches gold for JV and J30 platforms and 15µ inches gold for J0C platform.
4. The MSL rating for J0C-000X is Level 4. All other connectors are Level 1.
5. NL parts are tin matte finish over nickel.
Part Shield Contact
Housing MSL2
Number Material Finish Material Plating Area3 Solder Area5
Material Specification Rating
J0C/JV/J3
20-40µ inches thick nickel Phosphor (X)µ inches gold over Tin matte finish High Temp.
Series Brass over Brass Bronze 30-80µ inches nickel Thermoplastic UL 94 V-0 14
RJ45 Material Specification
www.pulseeng.com 1 J409.I (6/10)
USA 858 674 8100
Germany 49 7032 7806 0
Singapore 65 6287 8998
Shanghai 86 21 62787060
China 86 755 33966678
Taiwan 886 3 4643715
RoHS
Compliant
Part No.
Turns
Ratios
Tab
Option
Up/Down
LEDs1
L/R
BST
Circuit
EMI
Finger
Insertion
Loss
(db MAX)
Return Loss
(dB MIN)
100
W
(
±
15
W
)
Crosstalk
(db MIN)
Common Mode
Rejection
(dB MIN)
Hipot
(Vrms MIN)
TX RX
1-65
MHz
1-10
MHz
30
MHz
60-80
MHz
1-10
MHz
30-60
MHz
60-100
MHz
1-50
MHz
50-130
MHz
@ 60 Hz
1 MIN
J0C-0003NL 1CT:1 1CT:1 Down No No No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0004NL 1CT:1 1CT:1 Down No No Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0005NL 1CT:1 1CT:1 Down No Yes No -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
J0C-0006NL 1CT:1 1CT:1 Down No Yes Yes -1.0 -18 -14 -10 -35 -35 -30 -20 -20 1500
JV006I21NL 1CT:1 1CT:1 Down No No Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
JV011I21NL 1CT:1 1CT:1 Down No Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
JV026I21NL 1CTS:1 1CT:1 Down No Yes Yes -1.0 - 20 -16 -12 -40 -35 -30 -30 -20 1500
J3006G21DNL 1CT:1 1CT:1 Up G/Y No Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3011G21DNL 1CT:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3018G21KNL 1CTS:1.414 1CT:1 Up G/G Yes Yes -1.0 -20 -16 -11.5 -40 -35 -30 -30 -20 1500
J3026G01DNL 1CTS:1 1CT:1 Up G/Y Yes No -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
J3026G21DNL 1CTS:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
JX30-0005NL
3
1CT:1 1CT:1 Up G/Y Yes Yes -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500
Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C
Pu l s e Ja c k TM
Surface Mount 1x1
J0C Platform Schematics
J0C-0005NL/06NL
J0C-0003NL/04NL
�
www.pulseeng.com 2 J409.I (6/10)
USA 858 674 8100
Germany 49 7032 7806 0
Singapore 65 6287 8998
Shanghai 86 21 62787060
China 86 755 33966678
Taiwan 886 3 4643715
Pu l s e Ja c k TM
Surface Mount 1x1
JV Platform Schematics
JV006 JV011
JV026
www.pulseeng.com 3 J409.I (6/10)
USA 858 674 8100
Germany 49 7032 7806 0
Singapore 65 6287 8998
Shanghai 86 21 62787060
China 86 755 33966678
Taiwan 886 3 4643715
Pu l s e Ja c k TM
Surface Mount 1x1
J3 Platform Schematics
J3006 J3011
J3018/J3026 JX30-0005NL
www.pulseeng.com 4 J409.I (6/10)
USA 858 674 8100
Germany 49 7032 7806 0
Singapore 65 6287 8998
Shanghai 86 21 62787060
China 86 755 33966678
Taiwan 886 3 4643715
Pu l s e Ja c k TM
Surface Mount 1x1
J0C Platform Mechanicals
(J0C-0003NL/05NL - Same platform without
J0C-0004NL/06NL
EMI Fingers
EMI Fingers
www.pulseeng.com 5 J409.I (6/10)
USA 858 674 8100
Germany 49 7032 7806 0
Singapore 65 6287 8998
Shanghai 86 21 62787060
China 86 755 33966678
Taiwan 886 3 4643715
Pu l s e Ja c k TM
Surface Mount 1x1
JV Platform Mechanicals
JV Series
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
www.pulseeng.com 6 J409.I (6/10)
USA 858 674 8100
Germany 49 7032 7806 0
Singapore 65 6287 8998
Shanghai 86 21 62787060
China 86 755 33966678
Taiwan 886 3 4643715
Pu l s e Ja c k TM
Surface Mount 1x1
J3 Platform Mechanical
J3 Series
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
JX30-0005NL
& J3026G21D
With EMI
Tabs
www.pulseeng.com 7 J409.I (6/10)
USA 858 674 8100
Germany 49 7032 7806 0
Singapore 65 6287 8998
Shanghai 86 21 62787060
China 86 755 33966678
Taiwan 886 3 4643715
Pu l s e Ja c k TM
Surface Mount 1x1
J0C Application Note
This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics
Modules has been specifically designed for the implementation
of a 10Base-T and 100Base-TX transmission over data-grade
unshielded twisted pair cable (UTP-3, 5e and 6).
The connectors provide excellent EMI filtering and are suitable for
adapter card and multiport applications. Pulse has worked closely
with the leading IC manufacturers in providing these 10/100
solutions, thereby assuring compatibility with each transceiver.
The JC0 series meets the stringent open circuit inductance
requirements imposed by IEEE. When an 8mA DC current is
applied across the transformer windings, the transformer will
provide at least 350µH. The transformers used in each module
also provide 1500Vrms minimum isolation, wide bandwidth with
minimal attenuation and fast rise times to minimize system
level jitter.
The 1X1 SMT RJ45 connectors manufactured by Pulse are
designed to meet all published specifications after exposure
to surface mount soldering temperatures. The SMT are robust
enough to withstand convection and infrared reflow solder
temperatures. Additionally, compliant leads provide excellent
solder-joint reliability with a coplanarity of 0.10mm (0.004”)
NOTE: Modules are packaged in trays, unless Tape & Reel
is specified (ex: J0C-0003NL for Trays and J0C-0003NLT for
Tape & Reel).
PCB Layout Recommendations:
1. For maximum EMI suppression (electromagnetic interference)
place the decoupling capacitors adjacent to Vcc and 50W
connections.
2. Connections to ground should be as short as possible.
3. Connections between the 10/100 IC and the SMT connector
should be direct (ideally no change in direction) and of
minimum length.
J0C-0003NL/04NL Connector
www.pulseeng.com 8 J409.I (6/10)
USA 858 674 8100
Germany 49 7032 7806 0
Singapore 65 6287 8998
Shanghai 86 21 62787060
China 86 755 33966678
Taiwan 886 3 4643715
Pu l s e Ja c k TM
Surface Mount 1x1
JV Application Note
This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics
Modules has been specifically designed for the implementation
of a 10Base-T and 100Base-TX transmission over data-grade
unshielded twisted pair cable (UTP-3, 5e and 6).
The connectors provide excellent EMI filtering and are suitable for
adapter card and multiport applications. Pulse has worked closely
with the leading IC manufacturers in providing these 10/100
solutions, thereby assuring compatibility with each transceiver.
The JV series meets the stringent open circuit inductance
requirements imposed by IEEE. When an 8mA DC current is
applied across the transformer windings, the transformer will
provide at least 350µH. The transformers used in each module
also provide 1500Vrms minimum isolation, wide bandwidth with
minimal attenuation and fast rise times to minimize system
level jitter.
The 1X1 SMT RJ45 connectors manufactured by Pulse are
designed to meet all published specifications after exposure
to surface mount soldering temperatures. The SMT are robust
enough to withstand convection and infrared reflow solder
temperatures. Additionally, compliant leads provide excellent
solder-joint reliability with a coplanarity of 0.10mm (0.004”)
NOTE: Modules are packaged in trays, unless Tape & Reel
is specified. Please add the suffix “T” for Tape & Reel orders
(ex: JV006I21T). Add the suffix “NL” for RoHS compliant parts
(ex: JV006I21NL for Trays and JV006I21NLT for Tape & Reel).
PCB Layout Recommendations:
1. For maximum EMI suppression (electromagnetic interference)
place the decoupling capacitors adjacent to Vcc and 50W
connections.
2. Connections to ground should be as short as possible.
3. Connections between the 10/100 IC and the SMT connector
should be direct (ideally no change in direction) and of
minimum length.
�
�
www.pulseeng.com 9 J409.I (6/10)
USA 858 674 8100
Germany 49 7032 7806 0
Singapore 65 6287 8998
Shanghai 86 21 62787060
China 86 755 33966678
Taiwan 886 3 4643715
Pu l s e Ja c k TM
Surface Mount 1x1
J0C Packaging Specifications
J0C Series
Weight ..............7.07 grams
Tape & Reel ............ 90/reel
Tray ........................ 80/tray
Tape ...................44x32mm
Tube ...................... 25/tube
USA 858 674 8100
Germany 49 7032 7806 0
Singapore 65 6287 8998
Shanghai 86 21 62787060
China 86 755 33966678
Taiwan 886 3 4643715
www.pulseeng.com 10 J409.I (6/10)
JV Packaging Specifications
Pu l s e Ja c k TM
Surface Mount 1x1
JV Series
Weight ................6.6 grams
Tape & Reel .......... 150/reel
Tray ........................ 45/tray
Tape ...................44x32mm
www.pulseeng.com 11 J409.I (6/10)
USA 858 674 8100
Germany 49 7032 7806 0
Singapore 65 6287 8998
Shanghai 86 21 62787060
China 86 755 33966678
Taiwan 886 3 4643715
Pu l s e Ja c k TM
Surface Mount 1x1
J3 Packaging Specifications
J3 Series
Weight ................8.1 grams
Tape & Reel ............ 75/reel
Tray ........................ 45/tray
Tape ...................56x32mm
www.pulseeng.com 12 J409.I (6/10)
Pulse Worldwide
Headquarters
Two Pearl Buck Court
Bristol, PA 19007
U.S.A.
www.pulseeng.com
Tel: 215 781 6400
Fax: 215 781 6403
Pulse South Asia
135 Joo Seng Rd.
#03-02
PM Industrial Bldg.
Singapore 368363
Tel: 65 6287 8998
Fax: 65 6280 0080
Pulse North Asia
No. 26, Kao Ching Rd.
Yang Mei Chen
Taoyuan Hsien
Taiwan
R. O. C.
Tel: 886 3 4643715
Fax: 886 3 4641911
Pulse North China
Room 2704/2705
Super Ocean Finance Ctr.
2067 Yan An Rd. West
Shanghai 200336
China
Tel: 86 21 62787060
Fax: 86 2162786973
Pulse Europe
Einsteinstrasse 1
D-71083 Herrenberg
Germany
Tel: 49 7032 7806 0
Fax: 49 7032 7806 135
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2009. Pulse Engineering, Inc. All rights reserved.
Pulse China Headquarters
B402, Shenzhen Academy of
Aerospace Technology Bldg.
10th Kejinan Rd.
High-Tech Zone
Nanshan District
Shenzen, PR China 518057
Tel: 86 755 33966678
Fax: 86 755 33966700
For More Information:
