ispMACH 4000V/B/C/Z Family (R) 3.3V/2.5V/1.8V In-System Programmable SuperFAST TM High Density PLDs May 2009 Data Sheet DS1020 Broad Device Offering Features * Multiple temperature range support - Commercial: 0 to 90C junction (Tj) - Industrial: -40 to 105C junction (Tj) - Extended: -40 to 130C junction (Tj) * For AEC-Q100 compliant devices, refer to LA-ispMACH 4000V/Z Automotive Data Sheet High Performance * * * fMAX = 400MHz maximum operating frequency tPD = 2.5ns propagation delay Up to four global clock pins with programmable clock polarity control * Up to 80 PTs per output Easy System Integration Ease of Design * Superior solution for power sensitive consumer applications * Operation with 3.3V, 2.5V or 1.8V LVCMOS I/O * Operation with 3.3V (4000V), 2.5V (4000B) or 1.8V (4000C/Z) supplies * 5V tolerant I/O for LVCMOS 3.3, LVTTL, and PCI interfaces * Hot-socketing * Open-drain capability * Input pull-up, pull-down or bus-keeper * Programmable output slew rate * 3.3V PCI compatible * IEEE 1149.1 boundary scan testable * 3.3V/2.5V/1.8V In-System Programmable (ISPTM) using IEEE 1532 compliant interface * I/O pins with fast setup path * Lead-free package options * Enhanced macrocells with individual clock, reset, preset and clock enable controls * Up to four global OE controls * Individual local OE control per I/O pin * Excellent First-Time-FitTM and refit * Fast path, SpeedLockingTM Path, and wide-PT path * Wide input gating (36 input logic blocks) for fast counters, state machines and address decoders Zero Power (ispMACH 4000Z) and Low Power (ispMACH 4000V/B/C) * * * * Typical static current 10A (4032Z) Typical static current 1.3mA (4000C) 1.8V core low dynamic power ispMACH 4000Z operational down to 1.6V VCC Table 1. ispMACH 4000V/B/C Family Selection Guide Macrocells I/O + Dedicated Inputs ispMACH 4032V/B/C ispMACH 4064V/B/C ispMACH 4128V/B/C ispMACH 4256V/B/C ispMACH 4384V/B/C ispMACH 4512V/B/C 32 64 128 256 384 512 30+2/32+4 30+2/32+4/ 64+10 64+10/92+4/ 96+4 64+10/96+14/ 128+4/160+4 128+4/192+4 128+4/208+4 tPD (ns) 2.5 2.5 2.7 3.0 3.5 3.5 tS (ns) 1.8 1.8 1.8 2.0 2.0 2.0 tCO (ns) 2.2 2.2 2.7 2.7 2.7 2.7 fMAX (MHz) 400 400 333 322 322 322 3.3/2.5/1.8V 3.3/2.5/1.8V 3.3/2.5/1.8V 3.3/2.5/1.8V 3.3/2.5/1.8V 3.3/2.5/1.8V 44 TQFP 48 TQFP 44 TQFP 48 TQFP 100 TQFP 100 TQFP 128 TQFP 144 TQFP1 100 TQFP 176 TQFP 256 ftBGA/ fpBGA3 176 TQFP 256 ftBGA/ fpBGA3 Supply Voltages (V) Pins/Package 144 TQFP1 176 TQFP 256 ftBGA2/ fpBGA2, 3 1. 3.3V (4000V) only. 2. 128-I/O and 160-I/O configurations. 3. Use 256 ftBGA package for all new designs. Refer to PCN#14A-07 for 256 fpBGA package discontinuance. (c) 2009 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. www.latticesemi.com 1 DS1020_23.1 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Table 2. ispMACH 4000Z Family Selection Guide ispMACH 4032ZC Macrocells ispMACH 4064ZC ispMACH 4128ZC ispMACH 4256ZC 32 64 128 256 32+4/32+4 32+4/32+12/ 64+10/64+10 64+10/96+4 64+10/96+6/ 128+4 tPD (ns) 3.5 3.7 4.2 4.5 tS (ns) 2.2 2.5 2.7 2.9 tCO (ns) 3.0 3.2 3.5 3.8 fMAX (MHz) 267 250 220 200 Supply Voltage (V) 1.8 1.8 1.8 1.8 20 25 35 55 48 TQFP 56 csBGA 48 TQFP 56 csBGA 100 TQFP 132 csBGA 100 TQFP 132csBGA 100 TQFP 132 csBGA 176 TQFP I/O + Dedicated Inputs Max. Standby Icc (A) Pins/Package ispMACH 4000 Introduction The high performance ispMACH 4000 family from Lattice offers a SuperFAST CPLD solution. The family is a blend of Lattice's two most popular architectures: the ispLSI(R) 2000 and ispMACH 4A. Retaining the best of both families, the ispMACH 4000 architecture focuses on significant innovations to combine the highest performance with low power in a flexible CPLD family. The ispMACH 4000 combines high speed and low power with the flexibility needed for ease of design. With its robust Global Routing Pool and Output Routing Pool, this family delivers excellent First-Time-Fit, timing predictability, routing, pin-out retention and density migration. The ispMACH 4000 family offers densities ranging from 32 to 512 macrocells. There are multiple density-I/O combinations in Thin Quad Flat Pack (TQFP), Chip Scale BGA (csBGA) and Fine Pitch Thin BGA (ftBGA) packages ranging from 44 to 256 pins/balls. Table 1 shows the macrocell, package and I/O options, along with other key parameters. The ispMACH 4000 family has enhanced system integration capabilities. It supports 3.3V (4000V), 2.5V (4000B) and 1.8V (4000C/Z) supply voltages and 3.3V, 2.5V and 1.8V interface voltages. Additionally, inputs can be safely driven up to 5.5V when an I/O bank is configured for 3.3V operation, making this family 5V tolerant. The ispMACH 4000 also offers enhanced I/O features such as slew rate control, PCI compatibility, bus-keeper latches, pull-up resistors, pull-down resistors, open drain outputs and hot socketing. The ispMACH 4000 family members are 3.3V/ 2.5V/1.8V in-system programmable through the IEEE Standard 1532 interface. IEEE Standard 1149.1 boundary scan testing capability also allows product testing on automated test equipment. The 1532 interface signals TCK, TMS, TDI and TDO are referenced to VCC (logic core). Overview The ispMACH 4000 devices consist of multiple 36-input, 16-macrocell Generic Logic Blocks (GLBs) interconnected by a Global Routing Pool (GRP). Output Routing Pools (ORPs) connect the GLBs to the I/O Blocks (IOBs), which contain multiple I/O cells. This architecture is shown in Figure 1. 2 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet 16 16 Generic Logic Block 36 I/O Block ORP 16 36 16 16 36 36 Generic 16 Logic Block VCCO1 GND TCK TMS TDI TDO VCC GND GOE0 GOE1 16 I/O Bank 0 ORP Generic Logic Block I/O Block ORP I/O Bank 1 I/O Block Global Routing Pool VCCO0 GND CLK0/I CLK1/I CLK2/I CLK3/I Figure 1. Functional Block Diagram Generic 16 Logic Block I/O Block ORP The I/Os in the ispMACH 4000 are split into two banks. Each bank has a separate I/O power supply. Inputs can support a variety of standards independent of the chip or bank power supply. Outputs support the standards compatible with the power supply provided to the bank. Support for a variety of standards helps designers implement designs in mixed voltage environments. In addition, 5V tolerant inputs are specified within an I/O bank that is connected to VCCO of 3.0V to 3.6V for LVCMOS 3.3, LVTTL and PCI interfaces. ispMACH 4000 Architecture There are a total of two GLBs in the ispMACH 4032, increasing to 32 GLBs in the ispMACH 4512. Each GLB has 36 inputs. All GLB inputs come from the GRP and all outputs from the GLB are brought back into the GRP to be connected to the inputs of any other GLB on the device. Even if feedback signals return to the same GLB, they still must go through the GRP. This mechanism ensures that GLBs communicate with each other with consistent and predictable delays. The outputs from the GLB are also sent to the ORP. The ORP then sends them to the associated I/O cells in the I/O block. Generic Logic Block The ispMACH 4000 GLB consists of a programmable AND array, logic allocator, 16 macrocells and a GLB clock generator. Macrocells are decoupled from the product terms through the logic allocator and the I/O pins are decoupled from macrocells through the ORP. Figure 2 illustrates the GLB. 3 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet To GRP CLK3 CLK2 CLK1 CLK0 Figure 2. Generic Logic Block Clock Generator 1+OE 1+OE 1+OE 1+OE To ORP 16 MC Feedback Signals 16 Macrocells Logic Allocator 36 Inputs from GRP AND Array 36 Inputs, 83 Product Terms 1+OE 1+OE 1+OE 1+OE To Product Term Output Enable Sharing AND Array The programmable AND Array consists of 36 inputs and 83 output product terms. The 36 inputs from the GRP are used to form 72 lines in the AND Array (true and complement of the inputs). Each line in the array can be connected to any of the 83 output product terms via a wired-AND. Each of the 80 logic product terms feed the logic allocator with the remaining three control product terms feeding the Shared PT Clock, Shared PT Initialization and Shared PT OE. The Shared PT Clock and Shared PT Initialization signals can optionally be inverted before being fed to the macrocells. Every set of five product terms from the 80 logic product terms forms a product term cluster starting with PT0. There is one product term cluster for every macrocell in the GLB. Figure 3 is a graphical representation of the AND Array. 4 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Figure 3. AND Array In[0] In[34] In[35] PT0 PT1 PT2 PT3 PT4 Cluster 0 PT75 PT76 PT77 Cluster 15 PT78 PT79 PT80 Shared PT Clock PT81 Shared PT Initialization PT82 Shared PTOE Note: Indicates programmable fuse. Enhanced Logic Allocator Within the logic allocator, product terms are allocated to macrocells in product term clusters. Each product term cluster is associated with a macrocell. The cluster size for the ispMACH 4000 family is 4+1 (total 5) product terms. The software automatically considers the availability and distribution of product term clusters as it fits the functions within a GLB. The logic allocator is designed to provide three speed paths: 5-PT fast bypass path, 20-PT Speed Locking path and an up to 80-PT path. The availability of these three paths lets designers trade timing variability for increased performance. The enhanced Logic Allocator of the ispMACH 4000 family consists of the following blocks: * Product Term Allocator * Cluster Allocator * Wide Steering Logic Figure 4 shows a macrocell slice of the Logic Allocator. There are 16 such slices in the GLB. Figure 4. Macrocell Slice to to n-1 n-2 from from n-1 n-4 From n-4 Fast 5-PT Path 1-80 PTs 5-PT n To XOR (MC) Cluster to n+1 Individual Product Term Allocator from n+2 Cluster Allocator 5 from n+1 To n+4 SuperWIDETM Steering Logic Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Product Term Allocator The product term allocator assigns product terms from a cluster to either logic or control applications as required by the design being implemented. Product terms that are used as logic are steered into a 5-input OR gate associated with the cluster. Product terms that used for control are steered either to the macrocell or I/O cell associated with the cluster. Table 3 shows the available functions for each of the five product terms in the cluster. The OR gate output connects to the associated I/O cell, providing a fast path for narrow combinatorial functions, and to the logic allocator. Table 3. Individual PT Steering Product Term Logic PTn Logic PT Control Single PT for XOR/OR PTn+1 Logic PT Individual Clock (PT Clock) PTn+2 Logic PT Individual Initialization or Individual Clock Enable (PT Initialization/CE) PTn+3 Logic PT Individual Initialization (PT Initialization) PTn+4 Logic PT Individual OE (PTOE) Cluster Allocator The cluster allocator allows clusters to be steered to neighboring macrocells, thus allowing the creation of functions with more product terms. Table 4 shows which clusters can be steered to which macrocells. Used in this manner, the cluster allocator can be used to form functions of up to 20 product terms. Additionally, the cluster allocator accepts inputs from the wide steering logic. Using these inputs, functions up to 80 product terms can be created. Table 4. Available Clusters for Each Macrocell Macrocell Available Clusters M0 -- C0 C1 C2 M1 C0 C1 C2 C3 M2 C1 C2 C3 C4 M3 C2 C3 C4 C5 M4 C3 C4 C5 C6 M5 C4 C5 C6 C7 M6 C5 C6 C7 C8 M7 C6 C7 C8 C9 M8 C7 C8 C9 C10 M9 C8 C9 C10 C11 M10 C9 C10 C11 C12 M11 C10 C11 C12 C13 M12 C11 C12 C13 C14 M13 C12 C13 C14 C15 M14 C13 C14 C15 -- M15 C14 C15 -- -- Wide Steering Logic The wide steering logic allows the output of the cluster allocator n to be connected to the input of the cluster allocator n+4. Thus, cluster chains can be formed with up to 80 product terms, supporting wide product term functions and allowing performance to be increased through a single GLB implementation. Table 5 shows the product term chains. 6 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Table 5. Product Term Expansion Capability Expansion Chains Macrocells Associated with Expansion Chain (with Wrap Around) Max PT/ Macrocell Chain-0 M0 M4 M8 M12 M0 75 Chain-1 M1 M5 M9 M13 M1 80 Chain-2 M2 M6 M10 M14 M2 75 Chain-3 M3 M7 M11 M15 M3 70 Every time the super cluster allocator is used, there is an incremental delay of tEXP . When the super cluster allocator is used, all destinations other than the one being steered to, are given the value of ground (i.e., if the super cluster is steered to M (n+4), then M (n) is ground). Macrocell The 16 macrocells in the GLB are driven by the 16 outputs from the logic allocator. Each macrocell contains a programmable XOR gate, a programmable register/latch, along with routing for the logic and control functions. Figure 5 shows a graphical representation of the macrocell. The macrocells feed the ORP and GRP. A direct input from the I/O cell allows designers to use the macrocell to construct high-speed input registers. A programmable delay in this path allows designers to choose between the fastest possible set-up time and zero hold time. Figure 5. Macrocell Power-up Initialization Shared PT Initialization PT Initialization (optional) PT Initialization/CE (optional) Delay From I/O Cell R From Logic Allocator D/T/L P To ORP Q To GRP CE Single PT Block CLK0 Block CLK1 Block CLK2 Block CLK3 PT Clock (optional) Shared PT Clock Enhanced Clock Multiplexer The clock input to the flip-flop can select any of the four block clocks along with the shared PT clock, and true and complement forms of the optional individual term clock. An 8:1 multiplexer structure is used to select the clock. The eight sources for the clock multiplexer are as follows: * Block CLK0 * Block CLK1 7 Lattice Semiconductor * * * * * * ispMACH 4000V/B/C/Z Family Data Sheet Block CLK2 Block CLK3 PT Clock PT Clock Inverted Shared PT Clock Ground Clock Enable Multiplexer Each macrocell has a 4:1 clock enable multiplexer. This allows the clock enable signal to be selected from the following four sources: * * * * PT Initialization/CE PT Initialization/CE Inverted Shared PT Clock Logic High Initialization Control The ispMACH 4000 family architecture accommodates both block-level and macrocell-level set and reset capability. There is one block-level initialization term that is distributed to all macrocell registers in a GLB. At the macrocell level, two product terms can be "stolen" from the cluster associated with a macrocell to be used for set/reset functionality. A reset/preset swapping feature in each macrocell allows for reset and preset to be exchanged, providing flexibility. Note that the reset/preset swapping selection feature affects power-up reset as well. All flip-flops power up to a known state for predictable system initialization. If a macrocell is configured to SET on a signal from the block-level initialization, then that macrocell will be SET during device power-up. If a macrocell is configured to RESET on a signal from the block-level initialization or is not configured for set/reset, then that macrocell will RESET on powerup. To guarantee initialization values, the VCC rise must be monotonic, and the clock must be inactive until the reset delay time has elapsed. GLB Clock Generator Each ispMACH 4000 device has up to four clock pins that are also routed to the GRP to be used as inputs. These pins drive a clock generator in each GLB, as shown in Figure 6. The clock generator provides four clock signals that can be used anywhere in the GLB. These four GLB clock signals can consist of a number of combinations of the true and complement edges of the global clock signals. Figure 6. GLB Clock Generator CLK0 Block CLK0 CLK1 Block CLK1 CLK2 Block CLK2 CLK3 Block CLK3 8 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Output Routing Pool (ORP) The Output Routing Pool allows macrocell outputs to be connected to any of several I/O cells within an I/O block. This provides greater flexibility in determining the pinout and allows design changes to occur without affecting the pinout. The output routing pool also provides a parallel capability for routing macrocell-level OE product terms. This allows the OE product term to follow the macrocell output as it is switched between I/O cells. Additionally, the output routing pool allows the macrocell output or true and complement forms of the 5-PT bypass signal to bypass the output routing multiplexers and feed the I/O cell directly. The enhanced ORP of the ispMACH 4000 family consists of the following elements: * Output Routing Multiplexers * OE Routing Multiplexers * Output Routing Pool Bypass Multiplexers Figure 7 shows the structure of the ORP from the I/O cell perspective. This is referred to as an ORP slice. Each ORP has as many ORP slices as there are I/O cells in the corresponding I/O block. Figure 7. ORP Slice OE Routing Multiplexer From PTOE To I/O Cell OE ORP Bypass Multiplexer 5-PT Fast Path To I/O Cell From Macrocell Output Output Routing Multiplexer Output Routing Multiplexers The details of connections between the macrocells and the I/O cells vary across devices and within a device dependent on the maximum number of I/Os available. Tables 5-9 provide the connection details. Table 6. ORP Combinations for I/O Blocks with 8 I/Os I/O Cell I/O 0 Available Macrocells M0, M1, M2, M3, M4, M5, M6, M7 I/O 1 M2, M3, M4, M5, M6, M7, M8, M9 I/O 2 M4, M5, M6, M7, M8, M9, M10, M11 I/O 3 M6, M7, M8, M9, M10, M11, M12, M13 I/O 4 M8, M9, M10, M11, M12, M13, M14, M15 I/O 5 M10, M11, M12, M13, M14, M15, M0, M1 I/O 6 M12, M13, M14, M15, M0, M1, M2, M3 I/O 7 M14, M15, M0, M1, M2, M3, M4, M5 9 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Table 7. ORP Combinations for I/O Blocks with 16 I/Os I/O Cell Available Macrocells I/O 0 M0, M1, M2, M3, M4, M5, M6, M7 I/O 1 M1, M2, M3, M4, M5, M6, M7, M8 I/O 2 M2, M3, M4, M5, M6, M7, M8, M9 I/O 3 M3, M4, M5, M6, M7, M8, M9, M10 I/O 4 M4, M5, M6, M7, M8, M9, M10, M11 I/O 5 M5, M6, M7, M8, M9, M10, M11, M12 I/O 6 M6, M7, M8, M9, M10, M11, M12, M13 I/O 7 M7, M8, M9, M10, M11, M12, M13, M14 I/O 8 M8, M9, M10, M11, M12, M13, M14, M15 I/O 9 M9, M10, M11, M12, M13, M14, M15, M0 I/O 10 M10, M11, M12, M13, M14, M15, M0, M1 I/O 11 M11, M12, M13, M14, M15, M0, M1, M2 I/O 12 M12, M13, M14, M15, M0, M1, M2, M3 I/O 13 M13, M14, M15, M0, M1, M2, M3, M4 I/O 14 M14, M15, M0, M1, M2, M3, M4, M5 I/O 15 M15, M0, M1, M2, M3, M4, M5, M6 Table 8. ORP Combinations for I/O Blocks with 4 I/Os I/O Cell Available Macrocells I/O 0 M0, M1, M2, M3, M4, M5, M6, M7 I/O 1 M4, M5, M6, M7, M8, M9, M10, M11 I/O 2 M8, M9, M10, M11, M12, M13, M14, M15 I/O 3 M12, M13, M14, M15, M0, M1, M2, M3 Table 9. ORP Combinations for I/O Blocks with 10 I/Os I/O Cell Available Macrocells I/O 0 M0, M1, M2, M3, M4, M5, M6, M7 I/O 1 M2, M3, M4, M5, M6, M7, M8, M9 I/O 2 M4, M5, M6, M7, M8, M9, M10, M11 I/O 3 M6, M7, M8, M9, M10, M11, M12, M13 I/O 4 M8, M9, M10, M11, M12, M13, M14, M15 I/O 5 M10, M11, M12, M13, M14, M15, M0, M1 I/O 6 M12, M13, M14, M15, M0, M1, M2, M3 I/O 7 M14, M15, M0, M1, M2, M3, M4, M5 I/O 8 M2, M3, M4, M5, M6, M7, M8, M9 I/O 9 M10, M11, M12, M13, M14, M15, M0, M1 10 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Table 10. ORP Combinations for I/O Blocks with 12 I/Os I/O Cell Available Macrocells I/O 0 M0, M1, M2, M3, M4, M5, M6, M7 I/O 1 M1, M2, M3, M4, M5, M6, M7, M8 I/O 2 M2, M3, M4, M5, M6, M7, M8, M9 I/O 3 M4, M5, M6, M7, M8, M9, M10, M11 I/O 4 M5, M6, M7, M8, M9, M10, M11, M12 I/O 5 M6, M7, M8, M9, M10, M11, M12, M13 I/O 6 M8, M9, M10, M11, M12, M13, M14, M15 I/O 7 M9, M10, M11, M12, M13, M14, M15, M0 I/O 8 M10, M11, M12, M13, M14, M15, M0, M1 I/O 9 M12, M13, M14, M15, M0, M1, M2, M3 I/O 10 M13, M14, M15, M0, M1, M2, M3, M4 I/O 11 M14, M15, M0, M1, M2, M3, M4, M5 ORP Bypass and Fast Output Multiplexers The ORP bypass and fast-path output multiplexer is a 4:1 multiplexer and allows the 5-PT fast path to bypass the ORP and be connected directly to the pin with either the regular output or the inverted output. This multiplexer also allows the register output to bypass the ORP to achieve faster tCO. Output Enable Routing Multiplexers The OE Routing Pool provides the corresponding local output enable (OE) product term to the I/O cell. I/O Cell The I/O cell contains the following programmable elements: output buffer, input buffer, OE multiplexer and bus maintenance circuitry. Figure 8 details the I/O cell. Figure 8. I/O Cell GOE 0 GOE 1 GOE 2 GOE 3 From ORP VCC VCCO VCCO * From ORP * * To Macrocell To GRP *Global fuses Each output supports a variety of output standards dependent on the VCCO supplied to its I/O bank. Outputs can also be configured for open drain operation. Each input can be programmed to support a variety of standards, independent of the VCCO supplied to its I/O bank. The I/O standards supported are: 11 Lattice Semiconductor * LVTTL * LVCMOS 3.3 * LVCMOS 2.5 ispMACH 4000V/B/C/Z Family Data Sheet * LVCMOS 1.8 * 3.3V PCI Compatible All of the I/Os and dedicated inputs have the capability to provide a bus-keeper latch, Pull-up Resistor or Pull-down Resistor. A fourth option is to provide none of these. The selection is done on a global basis. The default in both hardware and software is such that when the device is erased or if the user does not specify, the input structure is configured to be a Pull-up Resistor. Each ispMACH 4000 device I/O has an individually programmable output slew rate control bit. Each output can be individually configured for fast slew or slow slew. The typical edge rate difference between fast and slow slew setting is 20%. For high-speed designs with long, unterminated traces, the slow-slew rate will introduce fewer reflections, less noise and keep ground bounce to a minimum. For designs with short traces or well terminated lines, the fast slew rate can be used to achieve the highest speed. Global OE Generation Most ispMACH 4000 family devices have a 4-bit wide Global OE Bus, except the ispMACH 4032 device that has a 2-bit wide Global OE Bus. This bus is derived from a 4-bit internal global OE PT bus and two dual purpose I/O or GOE pins. Each signal that drives the bus can optionally be inverted. Each GLB has a block-level OE PT that connects to all bits of the Global OE PT bus with four fuses. Hence, for a 256-macrocell device (with 16 blocks), each line of the bus is driven from 16 OE product terms. Figures 9 and 10 show a graphical representation of the global OE generation. Figure 9. Global OE Generation for All Devices Except ispMACH 4032 Internal Global OE PT Bus (4 lines) Global OE 4-Bit Global OE Bus Shared PTOE (Block 0) Shared PTOE (Block n) Global Fuses Fuse connection Hard wired 12 GOE (0:3) to I/O cells Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Figure 10. Global OE Generation for ispMACH 4032 Internal Global OE PT Bus (2 lines) Global OE 4-Bit Global OE Bus Shared PTOE (Block 0) Shared PTOE (Block 1) Global Fuses GOE (3:0) to I/O cells Fuse connection Hard wired Zero Power/Low Power and Power Management The ispMACH 4000 family is designed with high speed low power design techniques to offer both high speed and low power. With an advanced E2 low power cell and non sense-amplifier design approach (full CMOS logic approach), the ispMACH 4000 family offers SuperFAST pin-to-pin speeds, while simultaneously delivering low standby power without needing any "turbo bits" or other power management schemes associated with a traditional sense-amplifier approach. The zero power ispMACH 4000Z is based on the 1.8V ispMACH 4000C family. With innovative circuit design changes, the ispMACH 4000Z family is able to achieve the industry's "lowest static power". IEEE 1149.1-Compliant Boundary Scan Testability All ispMACH 4000 devices have boundary scan cells and are compliant to the IEEE 1149.1 standard. This allows functional testing of the circuit board on which the device is mounted through a serial scan path that can access all critical logic notes. Internal registers are linked internally, allowing test data to be shifted in and loaded directly onto test nodes, or test node data to be captured and shifted out for verification. In addition, these devices can be linked into a board-level serial scan path for more board-level testing. The test access port operates with an LVCMOS interface that corresponds to the power supply voltage. I/O Quick Configuration To facilitate the most efficient board test, the physical nature of the I/O cells must be set before running any continuity tests. As these tests are fast, by nature, the overhead and time that is required for configuration of the I/Os' physical nature should be minimal so that board test time is minimized. The ispMACH 4000 family of devices allows this by offering the user the ability to quickly configure the physical nature of the I/O cells. This quick configuration takes milliseconds to complete, whereas it takes seconds for the entire device to be programmed. Lattice's ispVM(R) System programming software can either perform the quick configuration through the PC parallel port, or can generate the ATE or test vectors necessary for a third-party test system. 13 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet IEEE 1532-Compliant In-System Programming Programming devices in-system provides a number of significant benefits including: rapid prototyping, lower inventory levels, higher quality and the ability to make in-field modifications. All ispMACH 4000 devices provide In-System Programming (ISPTM) capability through the Boundary Scan Test Access Port. This capability has been implemented in a manner that ensures that the port remains complaint to the IEEE 1149.1 standard. By using IEEE 1149.1 as the communication interface through which ISP is achieved, users get the benefit of a standard, welldefined interface. All ispMACH 4000 devices are also compliant with the IEEE 1532 standard. The ispMACH 4000 devices can be programmed across the commercial temperature and voltage range. The PCbased Lattice software facilitates in-system programming of ispMACH 4000 devices. The software takes the JEDEC file output produced by the design implementation software, along with information about the scan chain, and creates a set of vectors used to drive the scan chain. The software can use these vectors to drive a scan chain via the parallel port of a PC. Alternatively, the software can output files in formats understood by common automated test equipment. This equipment can then be used to program ispMACH 4000 devices during the testing of a circuit board. User Electronic Signature The User Electronic Signature (UES) allows the designer to include identification bits or serial numbers inside the device, stored in E2CMOS memory. The ispMACH 4000 device contains 32 UES bits that can be configured by the user to store unique data such as ID codes, revision numbers or inventory control codes. Security Bit A programmable security bit is provided on the ispMACH 4000 devices as a deterrent to unauthorized copying of the array configuration patterns. Once programmed, this bit defeats readback of the programmed pattern by a device programmer, securing proprietary designs from competitors. Programming and verification are also defeated by the security bit. The bit can only be reset by erasing the entire device. Hot Socketing The ispMACH 4000 devices are well-suited for applications that require hot socketing capability. Hot socketing a device requires that the device, during power-up and down, can tolerate active signals on the I/Os and inputs without being damaged. Additionally, it requires that the effects of I/O pin loading be minimal on active signals. The ispMACH 4000 devices provide this capability for input voltages in the range 0V to 3.0V. Density Migration The ispMACH 4000 family has been designed to ensure that different density devices in the same package have the same pin-out. Furthermore, the architecture ensures a high success rate when performing design migration from lower density parts to higher density parts. In many cases, it is possible to shift a lower utilization design targeted for a high density device to a lower density device. However, the exact details of the final resource utilization will impact the likely success in each case. 14 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Absolute Maximum Ratings1, 2, 3 ispMACH 4000C/Z (1.8V) ispMACH 4000B (2.5V) ispMACH 4000V (3.3V) Supply Voltage (VCC) . . . . . . . . . . . . . . . . . . . . . . -0.5 to 2.5V . . . . . . . . . .-0.5 to 5.5V. . . . . . . . . . . -0.5 to 5.5V Output Supply Voltage (VCCO) . . . . . . . . . . . . . . . -0.5 to 4.5V . . . . . . . . . .-0.5 to 4.5V. . . . . . . . . . . -0.5 to 4.5V Input or I/O Tristate Voltage Applied4, 5 . . . . . . . . . -0.5 to 5.5V . . . . . . . . . .-0.5 to 5.5V. . . . . . . . . . . -0.5 to 5.5V Storage Temperature . . . . . . . . . . . . . . . . . . . . . . -65 to 150C. . . . . . . . . -65 to 150C. . . . . . . . . .-65 to 150C Junction Temperature (Tj) with Power Applied . . . -55 to 150C. . . . . . . . . -55 to 150C. . . . . . . . . .-55 to 150C 1. Stress above those listed under the "Absolute Maximum Ratings" may cause permanent damage to the device. Functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. 2. Compliance with Lattice Thermal Management document is required. 3. All voltages referenced to GND. 4. Undershoot of -2V and overshoot of (VIH (MAX) + 2V), up to a total pin voltage of 6.0V, is permitted for a duration of < 20ns. 5. Maximum of 64 I/Os per device with VIN > 3.6V is allowed. Recommended Operating Conditions Symbol Parameter Supply Voltage for 1.8V Devices Min. Max. ispMACH 4000C 1.65 1.95 V ispMACH 4000Z 1.7 1.9 V 1.9 V V ispMACH 4000Z, Extended Functional Voltage Operation VCC Supply Voltage for 2.5V Devices 2.3 2.7 Supply Voltage for 3.3V Devices 3.0 3.6 V 0 90 C Junction Temperature (Industrial) -40 105 C Junction Temperature (Extended) -40 130 C Min. Max. Units 1,000 -- Cycles Junction Temperature (Commercial) Tj 1.61, 2 Units 1. Devices operating at 1.6V can expect performance degradation up to 35%. 2. Applicable for devices with 2004 date codes and later. Contact factory for ordering instructions. Erase Reprogram Specifications Parameter Erase/Reprogram Cycle Note: Valid over commercial temperature range. Hot Socketing Characteristics1,2,3 Symbol IDK Parameter Input or I/O Leakage Current Min. Typ. Max. Units 0 VIN 3.0V, Tj = 105C Condition -- 30 150 A 0 VIN 3.0V, Tj = 130C -- 30 200 A 1. Insensitive to sequence of VCC or VCCO. However, assumes monotonic rise/fall rates for VCC and VCCO, provided (VIN - VCCO) 3.6V. 2. 0 < VCC < VCC (MAX), 0 < VCCO < VCCO (MAX). 3. IDK is additive to IPU, IPD or IBH. Device defaults to pull-up until fuse circuitry is active. 15 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet I/O Recommended Operating Conditions VCCO (V)1 Standard Min. Max. LVTTL 3.0 3.6 LVCMOS 3.3 3.0 3.6 Extended LVCMOS 3.32 2.7 3.6 LVCMOS 2.5 2.3 2.7 LVCMOS 1.8 1.65 1.95 PCI 3.3 3.0 3.6 1. Typical values for VCCO are the average of the min. and max. values. 2. ispMACH 4000Z only. DC Electrical Characteristics Over Recommended Operating Conditions Symbol Parameter Min. Typ. Max. Units 0 VIN < VCCO -- 0.5 1 A VCCO < VIN 5.5V -- -- 10 A 0 VIN 3.6V, Tj = 105C -- -- 10 A 0 VIN 3.6V, Tj = 130C -- -- 15 A 3.6V < VIN 5.5V, Tj = 105C 3.0V VCCO 3.6V -- -- 20 A 3.6V < VIN 5.5V, Tj = 130C 3.0V VCCO 3.6V -- -- 50 A I/O Weak Pull-up Resistor Current (ispMACH 4000Z) 0 VIN 0.7VCCO -30 -- -150 A I/O Weak Pull-up Resistor Current (ispMACH 4000V/B/C) 0 VIN 0.7VCCO -30 -- -200 A 30 -- 150 A IBHLS I/O Weak Pull-down Resistor Current VIL (MAX) VIN VIH (MIN) Bus Hold Low Sustaining Current VIN = VIL (MAX) 30 -- -- A IBHHS Bus Hold High Sustaining Current VIN = 0.7 VCCO -30 -- -- A IIL, IIH1, 4 Input Leakage Current (ispMACH 4000Z) IIH1 Input High Leakage Current (ispMACH 4000Z) IIL, IIH1 Input Leakage Current (ispMACH 4000V/B/C) IIH1,2 IPU IPD Input High Leakage Current (ispMACH 4000V/B/C) Condition IBHLO Bus Hold Low Overdrive Current 0V VIN VBHT -- -- 150 A IBHHO Bus Hold High Overdrive Current VBHT VIN VCCO -- -- -150 A VBHT Bus Hold Trip Points -- VCCO * 0.35 -- VCCO * 0.65 V C1 I/O Capacitance3 C2 Clock Capacitance3 C3 Global Input Capacitance3 VCCO = 3.3V, 2.5V, 1.8V -- VCC = 1.8V, VIO = 0 to VIH (MAX) -- VCCO = 3.3V, 2.5V, 1.8V -- VCC = 1.8V, VIO = 0 to VIH (MAX) -- VCCO = 3.3V, 2.5V, 1.8V -- VCC = 1.8V, VIO = 0 to VIH (MAX) -- 8 6 6 -- -- -- -- -- -- pf pf pf 1. Input or I/O leakage current is measured with the pin configured as an input or as an I/O with the output driver tristated. It is not measured with the output driver active. Bus maintenance circuits are disabled. 2. 5V tolerant inputs and I/O should only be placed in banks where 3.0V VCCO 3.6V. 3. TA = 25C, f = 1.0MHz 4. IIH excursions of up to 1.5A maximum per pin above the spec limit may be observed for certain voltage conditions on no more than 10% of the device's I/O pins. 16 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Supply Current, ispMACH 4000V/B/C Over Recommended Operating Conditions Symbol Parameter Condition Min. Typ. Max. Units Vcc = 3.3V -- 11.8 -- mA Vcc = 2.5V -- 11.8 -- mA Vcc = 1.8V -- 1.8 -- mA Vcc = 3.3V -- 11.3 -- mA Vcc = 2.5V -- 11.3 -- mA Vcc = 1.8V -- 1.3 -- mA Vcc = 3.3V -- 12 -- mA Vcc = 2.5V -- 12 -- mA Vcc = 1.8V -- 2 -- mA Vcc = 3.3V -- 11.5 -- mA Vcc = 2.5V -- 11.5 -- mA Vcc = 1.8V -- 1.5 -- mA Vcc = 3.3V -- 12 -- mA Vcc = 2.5V -- 12 -- mA Vcc = 1.8V -- 2 -- mA Vcc = 3.3V -- 11.5 -- mA Vcc = 2.5V -- 11.5 -- mA Vcc = 1.8V -- 1.5 -- mA Vcc = 3.3V -- 12.5 -- mA Vcc = 2.5V -- 12.5 -- mA Vcc = 1.8V -- 2.5 -- mA Vcc = 3.3V -- 12 -- mA Vcc = 2.5V -- 12 -- mA Vcc = 1.8V -- 2 -- mA Vcc = 3.3V -- 13.5 -- mA Vcc = 2.5V -- 13.5 -- mA Vcc = 1.8V -- 3.5 -- mA Vcc = 3.3V -- 12.5 -- mA Vcc = 2.5V -- 12.5 -- mA Vcc = 1.8V -- 2.5 -- mA Vcc = 3.3V -- 14 -- mA Vcc = 2.5V -- 14 -- mA Vcc = 1.8V -- 4 -- mA ispMACH 4032V/B/C 1,2,3 ICC ICC4 Operating Power Supply Current Standby Power Supply Current ispMACH 4064V/B/C ICC1,2,3 ICC5 Operating Power Supply Current Standby Power Supply Current ispMACH 4128V/B/C 1,2,3 ICC ICC4 Operating Power Supply Current Standby Power Supply Current ispMACH 4256V/B/C ICC1,2,3 ICC4 Operating Power Supply Current Standby Power Supply Current ispMACH 4384V/B/C 1,2,3 ICC ICC4 Operating Power Supply Current Standby Power Supply Current ispMACH 4512V/B/C ICC1,2,3 Operating Power Supply Current 17 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Supply Current, ispMACH 4000V/B/C (Cont.) Over Recommended Operating Conditions Symbol 4 ICC 1. 2. 3. 4. Parameter Standby Power Supply Current Min. Typ. Max. Units Vcc = 3.3V Condition -- 13 -- mA Vcc = 2.5V -- 13 -- mA Vcc = 1.8V -- 3 -- mA TA = 25C, frequency = 1.0 MHz. Device configured with 16-bit counters. ICC varies with specific device configuration and operating frequency. TA = 25C Supply Current, ispMACH 4000Z Over Recommended Operating Conditions Symbol Parameter Condition Min. Typ. Max. Units Vcc = 1.8V, TA = 25C -- 50 -- A Vcc = 1.9V, TA = 70C -- 58 -- A Vcc = 1.9V, TA = 85C -- 60 -- A Vcc = 1.9V, TA = 125C -- 70 -- A Vcc = 1.8V, TA = 25C -- 10 -- A Vcc = 1.9V, TA = 70C -- 13 20 A Vcc = 1.9V, TA = 85C -- 15 25 A Vcc = 1.9V, TA = 125C -- 22 -- A Vcc = 1.8V, TA = 25C -- 80 -- A Vcc = 1.9V, TA = 70C -- 89 -- A Vcc = 1.9V, TA = 85C -- 92 -- A Vcc = 1.9V, TA = 125C -- 109 -- A Vcc = 1.8V, TA = 25C -- 11 -- A Vcc = 1.9V, TA = 70C -- 15 25 A Vcc = 1.9V, TA = 85C -- 18 35 A Vcc = 1.9V, TA = 125C -- 37 -- A Vcc = 1.8V, TA = 25C -- 168 -- A Vcc = 1.9V, TA = 70C -- 190 -- A Vcc = 1.9V, TA = 85C -- A ispMACH 4032ZC ICC1, 2, 3, 5 ICC4, 5 Operating Power Supply Current Standby Power Supply Current ispMACH 4064ZC ICC1, 2, 3, 5 ICC4, 5 Operating Power Supply Current Standby Power Supply Current ispMACH 4128ZC ICC1, 2, 3, 5 ICC4, 5 Operating Power Supply Current Standby Power Supply Current 18 -- 195 Vcc = 1.9V, TA = 125C -- 212 -- A Vcc = 1.8V, TA = 25C -- 12 -- A Vcc = 1.9V, TA = 70C -- 16 35 A Vcc = 1.9V, TA = 85C -- 19 50 A Vcc = 1.9V, TA = 125C -- 42 -- A Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Supply Current, ispMACH 4000Z (Cont.) Over Recommended Operating Conditions Symbol Parameter Condition Min. Typ. Max. Units Vcc = 1.8V, TA = 25C -- 341 -- A Vcc = 1.9V, TA = 70C -- 361 -- A Vcc = 1.9V, TA = 85C -- A ispMACH 4256ZC ICC1, 2, 3, 5 ICC4, 5 1. 2. 3. 4. 5. Operating Power Supply Current Standby Power Supply Current -- 372 Vcc = 1.9V, TA = 125C -- 468 -- A Vcc = 1.8V, TA = 25C -- 13 -- A Vcc = 1.9V, TA = 70C -- 32 55 A Vcc = 1.9V, TA = 85C -- 43 90 A Vcc = 1.9V, TA = 125C -- 135 -- A TA = 25C, frequency = 1.0 MHz. Device configured with 16-bit counters. ICC varies with specific device configuration and operating frequency. VCCO = 3.6V, VIN = 0V or VCCO, bus maintenance turned off. VIN above VCCO will add transient current above the specified standby ICC. Includes VCCO current without output loading. 19 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet I/O DC Electrical Characteristics Over Recommended Operating Conditions VIH VIL Standard Min (V) Max (V) Min (V) Max (V) LVTTL -0.3 0.80 2.0 5.5 LVCMOS 3.3 -0.3 0.80 2.0 5.5 LVCMOS 2.5 -0.3 0.70 1.70 3.6 LVCMOS 1.8 (4000V/B) -0.3 0.63 1.17 3.6 LVCMOS 1.8 (4000C/Z) -0.3 0.35 * VCC 0.65 * VCC 3.6 PCI 3.3 (4000V/B) -0.3 1.08 1.5 PCI 3.3 (4000C/Z) -0.3 0.3 * 3.3 * (VCC / 1.8) 0.5 * 3.3 * (VCC / 1.8) VOL Max (V) VOH Min (V) IOL1 (mA) IOH1 (mA) 0.40 VCCO - 0.40 8.0 -4.0 0.20 VCCO - 0.20 0.1 -0.1 0.40 VCCO - 0.40 8.0 -4.0 0.20 VCCO - 0.20 0.1 -0.1 0.40 VCCO - 0.40 8.0 -4.0 0.20 VCCO - 0.20 0.1 -0.1 0.40 VCCO - 0.45 2.0 -2.0 0.20 VCCO - 0.20 0.1 -0.1 -2.0 0.40 VCCO - 0.45 2.0 0.20 VCCO - 0.20 0.1 -0.1 5.5 0.1 VCCO 0.9 VCCO 1.5 -0.5 5.5 0.1 VCCO 0.9 VCCO 1.5 -0.5 1. The average DC current drawn by I/Os between adjacent bank GND connections, or between the last GND in an I/O bank and the end of the I/O bank, as shown in the logic signals connection table, shall not exceed n*8mA. Where n is the number of I/Os between bank GND connections or between the last GND in a bank and the end of a bank. 20 Lattice Semiconductor 3.3V VCCO IOL IOH 80 60 40 20 0 0.5 1.0 1.5 50 IOL IOH 40 30 20 10 0 2.0 2.5 3.0 3.5 50 IOL IOH 40 30 20 10 0 0.5 1.0 1.5 0.5 1.0 1.5 2.0 VO Output Voltage (V) 1.8V VCCO 60 Typical I/O Output Current (mA) 60 0 0 VO Output Voltage (V) 0 2.5V VCCO 70 Typical I/O Output Current (mA) 100 Typical I/O Output Current (mA) ispMACH 4000V/B/C/Z Family Data Sheet 2.0 VO Output Voltage (V) 21 2.5 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V/B/C External Switching Characteristics Over Recommended Operating Conditions -25 -27 -3 -35 Description1, 2, 3 Min. Max. Min. Max. Min. Max. Min. Max. Units tPD 5-PT bypass combinatorial propagation delay -- 2.5 -- 2.7 -- 3.0 -- 3.5 ns tPD_MC 20-PT combinatorial propagation delay through macrocell -- 3.2 -- 3.5 -- 3.8 -- 4.2 ns tS GLB register setup time before clock 1.8 -- 1.8 -- 2.0 -- 2.0 -- ns tST GLB register setup time before clock with T-type register 2.0 -- 2.0 -- 2.2 -- 2.2 -- ns tSIR GLB register setup time before clock, input register path 0.7 -- 1.0 -- 1.0 -- 1.0 -- ns tSIRZ GLB register setup time before clock with zero hold 1.7 -- 2.0 -- 2.0 -- 2.0 -- ns tH GLB register hold time after clock 0.0 -- 0.0 -- 0.0 -- 0.0 -- ns tHT GLB register hold time after clock with T-type register 0.0 -- 0.0 -- 0.0 -- 0.0 -- ns tHIR GLB register hold time after clock, input register path 0.9 -- 1.0 -- 1.0 -- 1.0 -- ns tHIRZ GLB register hold time after clock, input register path with zero hold 0.0 -- 0.0 -- 0.0 -- 0.0 -- ns tCO GLB register clock-to-output delay -- 2.2 -- 2.7 -- 2.7 -- 2.7 ns tR External reset pin to output delay -- 3.5 -- 4.0 -- 4.4 -- 4.5 ns tRW External reset pulse duration 1.5 -- 1.5 -- 1.5 -- 1.5 - ns tPTOE/DIS Input to output local product term output enable/disable -- 4.0 -- 4.5 -- 5.0 -- 5.5 ns tGPTOE/DIS Input to output global product term output enable/disable -- 5.0 -- 6.5 -- 8.0 -- 8.0 ns tGOE/DIS Global OE input to output enable/disable -- 3.0 -- 3.5 -- 4.0 -- 4.5 ns tCW Global clock width, high or low 1.1 -- 1.3 -- 1.3 -- 1.3 -- ns tGW Global gate width low (for low transparent) or high (for high transparent) 1.1 -- 1.3 -- 1.3 -- 1.3 -- ns Input register clock width, high or low 1.1 -- 1.3 -- 1.3 -- 1.3 -- ns fMAX Clock frequency with internal feedback -- 400 -- 333 -- 322 -- 322 MHz fMAX (Ext.) Clock frequency with external feedback, [1/ (tS + tCO)] -- 250 -- 222 -- 212 -- 212 MHz Parameter tWIR 4 1. 2. 3. 4. Timing numbers are based on default LVCMOS 1.8 I/O buffers. Use timing adjusters provided to calculate other standards. Measured using standard switching circuit, assuming GRP loading of 1 and 1 output switching. Pulse widths and clock widths less than minimum will cause unknown behavior. Standard 16-bit counter using GRP feedback. 22 Timing v.3.2 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V/B/C External Switching Characteristics (Cont.) Over Recommended Operating Conditions -5 Parameter Description1, 2, 3 -75 -10 Min. Max. Min. Max. Min. Max. Units -- 5.0 -- 7.5 -- 10.0 ns tPD 5-PT bypass combinatorial propagation delay tPD_MC 20-PT combinatorial propagation delay through macrocell -- 5.5 -- 8.0 -- 10.5 ns tS GLB register setup time before clock 3.0 -- 4.5 -- 5.5 -- ns tST GLB register setup time before clock with T-type register 3.2 -- 4.7 -- 5.5 -- ns tSIR GLB register setup time before clock, input register path 1.2 -- 1.7 -- 1.7 -- ns tSIRZ GLB register setup time before clock with zero hold 2.2 -- 2.7 -- 2.7 -- ns tH GLB register hold time after clock 0.0 -- 0.0 -- 0.0 -- ns tHT GLB register hold time after clock with T-type register 0.0 -- 0.0 -- 0.0 -- ns tHIR GLB register hold time after clock, input register path 1.0 -- 1.0 -- 1.0 -- ns tHIRZ GLB register hold time after clock, input register path with zero hold 0.0 -- 0.0 -- 0.0 -- ns tCO GLB register clock-to-output delay -- 3.4 -- 4.5 -- 6.0 ns tR External reset pin to output delay -- 6.3 -- 9.0 -- 10.5 ns tRW External reset pulse duration 2.0 -- 4.0 -- 4.0 -- ns tPTOE/DIS Input to output local product term output enable/disable -- 7.0 -- 9.0 -- 10.5 ns tGPTOE/DIS Input to output global product term output enable/disable -- 9.0 -- 10.3 -- 12.0 ns tGOE/DIS Global OE input to output enable/disable -- 5.0 -- 7.0 -- 8.0 ns tCW Global clock width, high or low 2.2 -- 2.8 -- 4.0 -- ns tGW Global gate width low (for low transparent) or high (for high transparent) 2.2 -- 2.8 -- 4.0 -- ns tWIR Input register clock width, high or low 2.2 -- 2.8 -- 4.0 fMAX4 Clock frequency with internal feedback -- 227 -- 168 -- 125 MHz -- 156 -- 111 -- 86 fMAX (Ext.) Clock frequency with external feedback, [1/ (tS + tCO)] 1. 2. 3. 4. Timing numbers are based on default LVCMOS 1.8 I/O buffers. Use timing adjusters provided to calculate other standards. Measured using standard switching circuit, assuming GRP loading of 1 and 1 output switching. Pulse widths and clock widths less than minimum will cause unknown behavior. Standard 16-bit counter using GRP feedback. 23 ns MHz Timing v.3.2 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000Z External Switching Characteristics Over Recommended Operating Conditions -35 -37 -42 Description1, 2, 3 Min. Max. Min. Max. Min. Max. Units tPD 5-PT bypass combinatorial propagation delay -- 3.5 -- 3.7 -- 4.2 ns tPD_MC 20-PT combinatorial propagation delay through macrocell -- 4.4 -- 4.7 -- 5.7 ns tS GLB register setup time before clock 2.2 -- 2.5 -- 2.7 -- ns tST GLB register setup time before clock with T-type register 2.4 -- 2.7 -- 2.9 -- ns tSIR GLB register setup time before clock, input register path 1.0 -- 1.1 -- 1.3 -- ns tSIRZ GLB register setup time before clock with zero hold 2.0 -- 2.1 -- 2.6 -- ns tH GLB register hold time after clock 0.0 -- 0.0 -- 0.0 -- ns tHT GLB register hold time after clock with T-type register 0.0 -- 0.0 -- 0.0 -- ns tHIR GLB register hold time after clock, input register path 1.0 -- 1.0 -- 1.3 -- ns tHIRZ GLB register hold time after clock, input register path with zero hold 0.0 -- 0.0 -- 0.0 -- ns Parameter tCO GLB register clock-to-output delay -- 3.0 -- 3.2 -- 3.5 ns tR External reset pin to output delay -- 5.0 -- 6.0 -- 7.3 ns tRW External reset pulse duration 1.5 -- 1.7 -- 2.0 -- ns tPTOE/DIS Input to output local product term output enable/disable -- 7.0 -- 8.0 -- 8.0 ns tGPTOE/DIS Input to output global product term output enable/disable -- 6.5 -- 7.0 -- 8.0 ns tGOE/DIS Global OE input to output enable/disable -- 4.5 -- 4.5 -- 4.8 ns tCW Global clock width, high or low 1.0 -- 1.5 -- 1.8 -- ns tGW Global gate width low (for low transparent) or high (for high transparent) 1.0 -- 1.5 -- 1.8 -- ns Input register clock width, high or low 1.0 -- 1.5 -- 1.8 -- ns 4 fMAX Clock frequency with internal feedback -- 267 -- 250 -- 220 MHz fMAX (Ext.) clock frequency with external feedback, [1 / (tS + tCO)] -- 192 -- 175 -- 161 MHz tWIR 1. Timing numbers are based on default LVCMOS 1.8 I/O buffers. Use timing adjusters provided to calculate other standards. 2. Measured using standard switching GRP loading of 1 and 1 output switching. 3. Pulse widths and clock widths less than minimum will cause unknown behavior. 4. Standard 16-bit counter using GRP feedback. 24 Timing v.2.2 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000Z External Switching Characteristics (Cont.) Over Recommended Operating Conditions -45 -5 -75 Description1, 2, 3 Min. Max. Min. Max. Min. Max. Units tPD 5-PT bypass combinatorial propagation delay -- 4.5 -- 5.0 -- 7.5 ns tPD_MC 20-PT combinatorial propagation delay through macrocell -- 5.8 -- 6.0 -- 8.0 ns tS GLB register setup time before clock 2.9 -- 3.0 -- 4.5 -- ns tST GLB register setup time before clock with Ttype register 3.1 -- 3.2 -- 4.7 -- ns tSIR GLB register setup time before clock, input register path 1.3 -- 1.3 -- 1.4 -- ns tSIRZ GLB register setup time before clock with zero hold 2.6 -- 2.6 -- 2.7 -- ns tH GLB register hold time after clock 0.0 -- 0.0 -- 0.0 -- ns tHT GLB register hold time after clock with T-type register 0.0 -- 0.0 -- 0.0 -- ns tHIR GLB register hold time after clock, input register path 1.3 -- 1.3 -- 1.3 -- ns tHIRZ GLB register hold time after clock, input register path with zero hold 0.0 -- 0.0 -- 0.0 -- ns tCO GLB register clock-to-output delay -- 3.8 -- 4.2 -- 4.5 ns tR External reset pin to output delay -- 7.5 -- 7.5 -- 9.0 ns tRW External reset pulse duration 2.0 -- 2.0 -- 4.0 -- ns tPTOE/DIS Input to output local product term output enable/disable -- 8.2 -- 8.5 -- 9.0 ns tGPTOE/DIS Input to output global product term output enable/disable -- 10.0 -- 10.0 -- 10.5 ns tGOE/DIS Global OE input to output enable/disable -- 5.5 -- 6.0 -- 7.0 ns tCW Global clock width, high or low 1.8 -- 2.0 -- 2.8 -- ns tGW Global gate width low (for low transparent) or high (for high transparent) 1.8 -- 2.0 -- 2.8 -- ns Input register clock width, high or low 1.8 -- 2.0 -- 2.8 -- ns fMAX Clock frequency with internal feedback -- 200 -- 200 -- 168 MHz fMAX (Ext.) clock frequency with external feedback, [1 / (tS + tCO)] -- 150 -- 139 -- 111 MHz Parameter tWIR 4 1. Timing numbers are based on default LVCMOS 1.8 I/O buffers. Use timing adjusters provided to calculate other standards. 2. Measured using standard switching GRP loading of 1 and 1 output switching. 3. Pulse widths and clock widths less than minimum will cause unknown behavior. 4. Standard 16-bit counter using GRP feedback. 25 Timing v.2.2 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Timing Model The task of determining the timing through the ispMACH 4000 family, like any CPLD, is relatively simple. The timing model provided in Figure 11 shows the specific delay paths. Once the implementation of a given function is determined either conceptually or from the software report file, the delay path of the function can easily be determined from the timing model. The Lattice design tools report the timing delays based on the same timing model for a particular design. Note that the internal timing parameters are given for reference only, and are not tested. The external timing parameters are tested and guaranteed for every device. For more information on the timing model and usage, refer to TN1004, ispMACH 4000 Timing Model Design and Usage Guidelines. Figure 11. ispMACH 4000 Timing Model Routing/GLB Delays From Feedback tPDb tPDi IN SCLK tIN tIOI tROUTE tBLA tMCELL tEXP DATA Q tINREG tINDIO tGCLK_IN tIOI tFBK OE tBUF tIOO tEN tDIS Out In/Out Delays tPTCLK tBCLK C.E. tPTSR tBSR S/R MC Reg. Control Delays tORP Feedback Register/Latch Delays tGPTOE tPTOE tGOE tIOI In/Out Delays Note: Italicized items are optional delay adders. 26 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V/B/C Internal Timing Parameters Over Recommended Operating Conditions Parameter Description -2.5 -2.7 -3 -3.5 Units In/Out Delays tIN Input Buffer Delay -- 0.60 -- 0.60 -- 0.70 tGOE Global OE Pin Delay -- 2.04 -- 2.54 -- 3.04 tGCLK_IN Global Clock Input Buffer Delay -- 0.78 -- 1.28 -- 1.28 tBUF Delay through Output Buffer -- 0.85 -- 0.85 -- 0.85 tEN Output Enable Time -- 0.96 -- 0.96 -- 0.96 tDIS Output Disable Time -- 0.96 -- 0.96 -- -- 0.70 ns -- 3.54 ns -- 1.28 ns -- 0.85 ns -- 0.96 ns 0.96 -- 0.96 ns Routing/GLB Delays tROUTE Delay through GRP -- 0.61 -- 0.81 -- 1.01 -- 1.01 ns tMCELL Macrocell Delay -- 0.45 -- 0.55 -- 0.55 -- 0.65 ns tINREG Input Buffer to Macrocell Register Delay -- 0.11 -- 0.31 -- 0.31 -- 0.31 ns tFBK Internal Feedback Delay -- 0.00 -- 0.00 -- 0.00 -- 0.00 ns tPDb 5-PT Bypass Propagation Delay -- 0.44 -- 0.44 -- 0.44 -- 0.94 ns tPDi Macrocell Propagation Delay -- 0.64 -- 0.64 -- 0.64 -- 0.94 ns Register/Latch Delays tS D-Register Setup Time (Global Clock) 0.92 -- 1.12 -- 1.02 -- 0.92 -- ns tS_PT D-Register Setup Time (Product Term Clock) 1.42 -- 1.32 -- 1.32 -- 1.32 -- ns tST T-Register Setup Time (Global Clock) 1.12 -- 1.32 -- 1.22 -- 1.12 -- ns tST_PT T-Register Setup Time (Product Term Clock) 1.42 -- 1.32 -- 1.32 -- 1.32 -- ns tH D-Register Hold Time 0.88 -- 0.68 -- 0.98 -- 1.08 -- ns tHT T-Register Hold Time 0.88 -- 0.68 -- 0.98 -- 1.08 -- ns tSIR D-Input Register Setup Time (Global Clock) 0.82 -- 1.37 -- 1.27 -- 1.27 -- ns tSIR_PT D-Input Register Setup Time (Product Term Clock) 1.45 -- 1.45 -- 1.45 -- 1.45 -- ns tHIR D-Input Register Hold Time (Global Clock) 0.88 -- 0.63 -- 0.73 -- 0.73 -- ns tHIR_PT D-Input Register Hold Time (Product Term Clock) 0.88 -- 0.63 -- 0.73 -- 0.73 -- ns tCOi Register Clock to Output/Feedback MUX Time -- 0.52 -- 0.52 -- 0.52 -- 0.52 ns tCES Clock Enable Setup Time 2.25 -- 2.25 -- 2.25 -- 2.25 -- ns tCEH Clock Enable Hold Time 1.88 -- 1.88 -- 1.88 -- 1.88 -- ns tSL Latch Setup Time (Global Clock) 0.92 -- 1.12 -- 1.02 -- 0.92 -- ns tSL_PT Latch Setup Time (Product Term Clock) 1.42 -- 1.32 -- 1.32 -- 1.32 -- ns tHL Latch Hold Time 1.17 -- 1.17 -- 1.17 -- 1.17 -- ns tGOi Latch Gate to Output/Feedback MUX Time -- 0.33 -- 0.33 -- 0.33 -- 0.33 ns 27 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V/B/C Internal Timing Parameters (Cont.) Over Recommended Operating Conditions Parameter Description tPDLi Propagation Delay through Transparent Latch to Output/ Feedback MUX tSRi tSRR -2.5 -2.7 -3 -3.5 Units -- 0.25 -- 0.25 -- 0.25 -- 0.25 ns Asynchronous Reset or Set to Output/Feedback MUX Delay 0.28 -- 0.28 -- 0.28 -- 0.28 -- ns Asynchronous Reset or Set Recovery Time 1.67 -- 1.67 -- 1.67 -- 1.67 -- ns -- 1.12 -- 1.12 -- 1.12 -- 1.12 ns Control Delays tBCLK GLB PT Clock Delay tPTCLK Macrocell PT Clock Delay -- 0.87 -- 0.87 -- 0.87 -- 0.87 ns tBSR Block PT Set/Reset Delay -- 1.83 -- 1.83 -- 1.83 -- 1.83 ns tPTSR Macrocell PT Set/Reset Delay -- 1.11 -- 1.41 -- 1.51 -- 1.61 ns tGPTOE Global PT OE Delay -- 2.83 -- 4.13 -- 5.33 -- 5.33 ns tPTOE Macrocell PT OE Delay -- 1.83 -- 2.13 -- 2.33 -- 2.83 ns Timing v.3.2 Note: Internal Timing Parameters are not tested and are for reference only. Refer to the Timing Model in this data sheet for further details. 28 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V/B/C Internal Timing Parameters Over Recommended Operating Conditions -5 Parameter Description -75 -10 Min. Max. Min. Max. Min. Max. Units In/Out Delays tIN Input Buffer Delay -- 0.95 -- 1.50 -- 2.00 ns tGOE Global OE Pin Delay -- 4.04 -- 6.04 -- 7.04 ns tGCLK_IN Global Clock Input Buffer Delay -- 1.83 -- 2.28 -- 3.28 ns tBUF Delay through Output Buffer -- 1.00 -- 1.50 -- 1.50 ns tEN Output Enable Time -- 0.96 -- 0.96 -- 0.96 ns tDIS Output Disable Time -- 0.96 -- 0.96 -- 0.96 ns Routing/GLB Delays tROUTE Delay through GRP -- 1.51 -- 2.26 -- 3.26 ns tMCELL Macrocell Delay -- 1.05 -- 1.45 -- 1.95 ns tINREG Input Buffer to Macrocell Register Delay -- 0.56 -- 0.96 -- 1.46 ns tFBK Internal Feedback Delay -- 0.00 -- 0.00 -- 0.00 ns tPDb 5-PT Bypass Propagation Delay -- 1.54 -- 2.24 -- 3.24 ns tPDi Macrocell Propagation Delay -- 0.94 -- 1.24 -- 1.74 ns 1.32 -- 1.57 -- 1.57 -- ns Register/Latch Delays tS D-Register Setup Time (Global Clock) tS_PT D-Register Setup Time (Product Term Clock) 1.32 -- 1.32 -- 1.32 -- ns tST T-Register Setup Time (Global Clock) 1.52 -- 1.77 -- 1.77 -- ns tST_PT T-Register Setup Time (Product Term Clock) 1.32 -- 1.32 -- 1.32 -- ns tH D-Register Hold Time 1.68 -- 2.93 -- 3.93 -- ns tHT T-Register Hold Time 1.68 -- 2.93 -- 3.93 -- ns tSIR D-Input Register Setup Time (Global Clock) 1.52 -- 1.57 -- 1.57 -- ns tSIR_PT D-Input Register Setup Time (Product Term Clock) 1.45 -- 1.45 -- 1.45 -- ns tHIR D-Input Register Hold Time (Global Clock) 0.68 -- 1.18 -- 1.18 -- ns tHIR_PT D-Input Register Hold Time (Product Term Clock) 0.68 -- 1.18 -- 1.18 -- ns tCOi Register Clock to Output/Feedback MUX Time -- 0.52 -- 0.67 -- 1.17 ns tCES Clock Enable Setup Time 2.25 -- 2.25 -- 2.25 -- ns tCEH Clock Enable Hold Time 1.88 -- 1.88 -- 1.88 -- ns tSL Latch Setup Time (Global Clock) 1.32 -- 1.57 -- 1.57 -- ns tSL_PT Latch Setup Time (Product Term Clock) 1.32 -- 1.32 -- 1.32 -- ns tHL Latch Hold Time 1.17 -- 1.17 -- 1.17 -- ns tGOi Latch Gate to Output/Feedback MUX Time -- 0.33 -- 0.33 -- 0.33 ns tPDLi Propagation Delay through Transparent Latch to Output/ Feedback MUX -- 0.25 -- 0.25 -- 0.25 ns tSRi Asynchronous Reset or Set to Output/Feedback MUX Delay 0.28 -- 0.28 -- 0.28 -- ns tSRR Asynchronous Reset or Set Recovery Time 1.67 -- 1.67 -- 1.67 -- ns Control Delays tBCLK GLB PT Clock Delay -- 1.12 -- 1.12 -- 0.62 ns tPTCLK Macrocell PT Clock Delay -- 0.87 -- 0.87 -- 0.87 ns tBSR GLB PT Set/Reset Delay -- 1.83 -- 1.83 -- 1.83 ns tPTSR Macrocell PT Set/Reset Delay -- 2.51 -- 3.41 -- 3.41 ns 29 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V/B/C Internal Timing Parameters (Cont.) Over Recommended Operating Conditions -5 Parameter Description -75 -10 Min. Max. Min. Max. Min. Max. Units tGPTOE Global PT OE Delay -- 5.58 -- 5.58 -- 5.78 ns tPTOE Macrocell PT OE Delay -- 3.58 -- 4.28 -- 4.28 ns Timing v.3.2 Note: Internal Timing Parameters are not tested and are for reference only. Refer to the Timing Model in this data sheet for further details. 30 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000Z Internal Timing Parameters Over Recommended Operating Conditions -35 Parameter Description -37 -42 Min. Max. Min. Max. Min. Max. Units In/Out Delays tIN Input Buffer Delay -- 0.75 -- 0.80 -- 0.75 ns tGOE Global OE Pin Delay -- 2.25 -- 2.25 -- 2.30 ns tGCLK_IN Global Clock Input Buffer Delay -- 1.60 -- 1.60 -- 1.95 ns tBUF Delay through Output Buffer -- 0.75 -- 0.90 -- 0.90 ns tEN Output Enable Time -- 2.25 -- 2.25 -- 2.50 ns tDIS Output Disable Time -- 1.35 -- 1.35 -- 2.50 ns -- 1.60 -- 1.60 -- 2.15 ns Routing/GLB Delays tROUTE Delay through GRP tMCELL Macrocell Delay -- 0.65 -- 0.75 -- 0.85 ns tINREG Input Buffer to Macrocell Register Delay -- 0.91 -- 1.00 -- 1.00 ns tFBK Internal Feedback Delay -- 0.05 -- 0.00 -- 0.00 ns tPDb 5-PT Bypass Propagation Delay -- 0.40 -- 0.40 -- 0.40 ns tPDi Macrocell Propagation Delay -- 0.25 -- 0.25 -- 0.65 ns Register/Latch Delays tS D-Register Setup Time (Global Clock) 0.80 -- 0.95 -- 0.90 -- ns tS_PT D-Register Setup Time (Product Term Clock) 1.35 -- 1.95 -- 1.90 -- ns tST T-Register Setup Time (Global Clock) 1.00 -- 1.15 -- 1.10 -- ns tST_PT T-register Setup Time (Product Term Clock) 1.55 -- 1.75 -- 2.10 -- ns tH D-Register Hold Time 1.40 -- 1.55 -- 1.80 -- ns tHT T-Resister Hold Time 1.40 -- 1.55 -- 1.80 -- ns tSIR D-Input Register Setup Time (Global Clock) 0.94 -- 0.90 -- 1.50 -- ns tSIR_PT D-Input Register Setup Time (Product Term Clock) 1.45 -- 1.45 -- 1.45 -- ns tHIR D-Input Register Hold Time (Global Clock) 1.06 -- 1.20 -- 1.10 -- ns tHIR_PT D-Input Register Hold Time (Product Term Clock) 0.88 -- 1.00 -- 1.00 -- ns tCOi Register Clock to Output/Feedback MUX Time -- 0.65 -- 0.70 -- 0.65 ns tCES Clock Enable Setup Time 1.00 -- 2.00 -- 2.00 -- ns tCEH Clock Enable Hold Time 0.00 -- 0.00 -- 0.00 -- ns tSL Latch Setup Time (Global Clock) 0.80 -- 0.95 -- 0.90 -- ns tSL_PT Latch Setup Time (Product Term Clock) 1.55 -- 1.95 -- 1.90 -- ns tHL Latch Hold Time 1.40 -- 1.80 -- 1.80 -- ns tGOi Latch Gate to Output/Feedback MUX Time -- 0.40 -- 0.33 -- 0.33 ns tPDLi Propagation Delay through Transparent Latch to Output/ Feedback MUX -- 0.30 -- 0.25 -- 0.25 ns tSRi Asynchronous Reset or Set to Output/Feedback MUX Delay -- 0.28 -- 0.28 -- 1.27 ns tSRR Asynchronous Reset or Set Recovery Delay -- 2.00 -- 1.67 -- 1.80 ns Control Delays tBCLK GLB PT Clock Delay -- 1.30 -- 1.50 -- 1.55 ns tPTCLK Macrocell PT Clock Delay -- 1.50 -- 1.70 -- 1.55 ns tBSR GLB PT Set/Reset Delay -- 1.10 -- 1.83 -- 1.83 ns tPTSR Macrocell PT Set/Reset Delay -- 1.22 -- 2.02 -- 1.83 ns 31 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000Z Internal Timing Parameters (Cont.) Over Recommended Operating Conditions -35 Parameter Description -37 -42 Min. Max. Min. Max. Min. Max. Units tGPTOE Global PT OE Delay -- 1.9 -- 2.35 -- 2.60 ns tPTOE Macrocell PT OE Delay -- 2.4 -- 3.35 -- 2.60 Note: Internal Timing Parameters are not tested and are for reference only. Refer to the timing model in this data sheet for further details. 32 ns Timing v.2.2 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000Z Internal Timing Parameters (Cont.) Over Recommended Operating Conditions -45 Parameter Description -5 -75 Min. Max. Min. Max. Min. Max. Units In/Out Delays tIN Input Buffer Delay -- 0.95 -- 1.25 -- 1.80 ns tGOE Global OE Pin Delay -- 3.00 -- 3.50 -- 4.30 ns tGCLK_IN Global Clock Input Buffer Delay -- 1.95 -- 2.05 -- 2.15 ns tBUF Delay through Output Buffer -- 1.10 -- 1.00 -- 1.30 ns tEN Output Enable Time -- 2.50 -- 2.50 -- 2.70 ns tDIS Output Disable Time -- 2.50 -- 2.50 -- 2.70 ns -- 2.25 -- 2.05 -- 2.50 ns ns Routing/GLB Delays tROUTE Delay through GRP tMCELL Macrocell Delay -- 0.65 -- 0.65 -- 1.00 tINREG Input Buffer to Macrocell Register Delay -- 1.00 -- 1.00 -- 1.00 ns tFBK Internal Feedback Delay -- 0.35 -- 0.05 -- 0.05 ns tPDb 5-PT Bypass Propagation Delay -- 0.20 -- 0.70 -- 1.90 ns tPDi Macrocell Propagation Delay -- 0.45 -- 0.65 -- 1.00 ns Register/Latch Delays tS D-Register Setup Time (Global Clock) 1.00 -- 1.10 -- 1.35 -- ns tS_PT D-Register Setup Time (Product Term Clock) 2.10 -- 1.90 -- 2.45 -- ns tST T-Register Setup Time (Global Clock) 1.20 -- 1.30 -- 1.55 -- ns tST_PT T-register Setup Time (Product Term Clock) 2.30 -- 2.10 -- 2.75 -- ns tH D-Register Hold Time 1.90 -- 1.90 -- 3.15 -- ns tHT T-Resister Hold Time 1.90 -- 1.90 -- 3.15 -- ns tSIR D-Input Register Setup Time (Global Clock) 1.30 -- 1.10 -- 0.75 -- ns tSIR_PT D-Input Register Setup Time (Product Term Clock) 1.45 -- 1.45 -- 1.45 -- ns tHIR D-Input Register Hold Time (Global Clock) 1.30 -- 1.50 -- 1.95 -- ns tHIR_PT D-Input Register Hold Time (Product Term Clock) 1.00 -- 1.00 -- 1.18 -- ns tCOi Register Clock to Output/Feedback MUX Time -- 0.75 -- 1.15 -- 1.05 ns tCES Clock Enable Setup Time 2.00 -- 2.00 -- 2.00 -- ns tCEH Clock Enable Hold Time 0.00 -- 0.00 -- 0.00 -- ns tSL Latch Setup Time (Global Clock) 1.00 -- 1.00 -- 1.65 -- ns tSL_PT Latch Setup Time (Product Term Clock) 2.10 -- 1.90 -- 2.15 -- ns tHL Latch Hold Time 2.00 -- 2.00 -- 1.17 -- ns tGOi Latch Gate to Output/Feedback MUX Time -- 0.33 -- 0.33 -- 0.33 ns tPDLi Propagation Delay through Transparent Latch to Output/ Feedback MUX -- 0.25 -- 0.25 -- 0.25 ns tSRi Asynchronous Reset or Set to Output/Feedback MUX Delay -- 0.97 -- 0.97 -- 0.28 ns tSRR Asynchronous Reset or Set Recovery Delay -- 1.80 -- 1.80 -- 1.67 ns Control Delays tBCLK GLB PT Clock Delay -- 1.55 -- 1.55 -- 1.25 ns tPTCLK Macrocell PT Clock Delay -- 1.55 -- 1.55 -- 1.25 ns tBSR GLB PT Set/Reset Delay -- 1.83 -- 1.83 -- 1.83 ns tPTSR Macrocell PT Set/Reset Delay -- 1.83 -- 1.83 -- 2.72 ns tGPTOE Global PT OE Delay -- 4.30 -- 4.20 -- 3.50 ns 33 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000Z Internal Timing Parameters (Cont.) Over Recommended Operating Conditions -45 Parameter tPTOE Description Macrocell PT OE Delay -5 -75 Min. Max. Min. Max. Min. Max. Units -- 2.50 -- 2.70 -- 2.00 ns Note: Internal Timing Parameters are not tested and are for reference only. Refer to the timing model in this data sheet for further details. 34 Timing v.2.2 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V/B/C Timing Adders1 Adder Type Base Parameter -25 Description -27 -3 -35 Min. Max. Min. Max. Min. Max. Min. Max. Units Optional Delay Adders tINDIO tEXP tINREG Input register delay -- 0.95 -- 1.00 -- 1.00 -- 1.00 tMCELL Product term expander delay -- 0.33 -- 0.33 -- 0.33 -- 0.33 Output routing pool delay -- 0.05 -- 0.05 -- 0.05 -- 0.05 ns Additional block loading adder -- 0.03 -- 0.05 ns -- tORP tBLA tROUTE 0.05 -- 0.05 -- ns ns tIOI Input Adjusters LVTTL_in tIN, tGCLK_IN, tGOE Using LVTTL standard -- 0.60 -- 0.60 -- 0.60 -- 0.60 ns LVCMOS33_in tIN, tGCLK_IN, tGOE Using LVCMOS 3.3 standard -- 0.60 -- 0.60 -- 0.60 -- 0.60 ns LVCMOS25_in tIN, tGCLK_IN, tGOE Using LVCMOS 2.5 standard -- 0.60 -- 0.60 -- 0.60 -- 0.60 ns LVCMOS18_in tIN, tGCLK_IN, tGOE Using LVCMOS 1.8 standard -- 0.00 -- 0.00 -- 0.00 -- 0.00 ns PCI_in tIN, tGCLK_IN, tGOE Using PCI compatible input -- 0.60 -- 0.60 -- 0.60 -- 0.60 ns Output configured as tBUF, tEN, tDIS TTL buffer -- 0.20 -- 0.20 -- 0.20 -- 0.20 ns Output configured as LVCMOS33_out tBUF, tEN, tDIS 3.3V buffer -- 0.20 -- 0.20 -- 0.20 -- 0.20 ns Output configured as LVCMOS25_out tBUF, tEN, tDIS 2.5V buffer -- 0.10 -- 0.10 -- 0.10 -- 0.10 ns Output configured as LVCMOS18_out tBUF, tEN, tDIS 1.8V buffer -- 0.00 -- 0.00 -- 0.00 -- 0.00 ns PCI_out Output configured as tBUF, tEN, tDIS PCI compatible buffer -- 0.20 -- 0.20 -- 0.20 -- 0.20 ns Slow Slew tBUF, tEN Output configured for slow slew rate -- 1.00 -- 1.00 -- 1.00 -- 1.00 ns tIOO Output Adjusters LVTTL_out Note: Open drain timing is the same as corresponding LVCMOS timing. Timing v.3.2 1. Refer to TN1004, ispMACH 4000 Timing Model Design and Usage Guidelines for information regarding use of these adders. 35 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V/B/C Timing Adders1 (Cont.) Adder Type Base Parameter -5 Description -75 -10 Min. Max. Min. Max. Min. Max. Units Optional Delay Adders tINDIO tINREG Input register delay -- 1.00 -- 1.00 -- 1.00 ns tEXP tMCELL Product term expander delay -- 0.33 -- 0.33 -- 0.33 ns Output routing pool delay -- 0.05 -- 0.05 -- 0.05 ns Additional block loading adder -- 0.05 -- 0.05 -- 0.05 ns tORP tBLA -- tROUTE tIOI Input Adjusters LVTTL_in tIN, tGCLK_IN, tGOE Using LVTTL standard -- 0.60 -- 0.60 -- 0.60 ns LVCMOS33_in tIN, tGCLK_IN, tGOE Using LVCMOS 3.3 standard -- 0.60 -- 0.60 -- 0.60 ns LVCMOS25_in tIN, tGCLK_IN, tGOE Using LVCMOS 2.5 standard -- 0.60 -- 0.60 -- 0.60 ns LVCMOS18_in tIN, tGCLK_IN, tGOE Using LVCMOS 1.8 standard -- 0.00 -- 0.00 -- 0.00 ns PCI_in tIN, tGCLK_IN, tGOE Using PCI compatible input -- 0.60 -- 0.60 -- 0.60 ns tIOO Output Adjusters LVTTL_out tBUF, tEN, tDIS Output configured as TTL buffer -- 0.20 -- 0.20 -- 0.20 ns LVCMOS33_out tBUF, tEN, tDIS Output configured as 3.3V buffer LVCMOS25_out tBUF, tEN, tDIS Output configured as 2.5V buffer -- 0.20 -- 0.20 -- 0.20 ns -- 0.10 -- 0.10 -- 0.10 ns LVCMOS18_out tBUF, tEN, tDIS Output configured as 1.8V buffer -- 0.00 -- 0.00 -- 0.00 ns PCI_out Output configured as PCI compatible tBUF, tEN, tDIS buffer -- 0.20 -- 0.20 -- 0.20 ns Slow Slew tBUF, tEN -- 1.00 -- 1.00 -- 1.00 ns Output configured for slow slew rate Note: Open drain timing is the same as corresponding LVCMOS timing. Timing v.3.2 1. Refer to TN1004, ispMACH 4000 Timing Model Design and Usage Guidelines for information regarding use of these adders. 36 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000Z Timing Adders 1 Adder Type Base Parameter -35 Description -37 -42 Min. Max. Min. Max. Min. Max. Units Optional Delay Adders tINDIO tINREG Input register delay -- 1.00 -- 1.00 -- 1.30 ns tEXP tMCELL Product term expander delay -- 0.40 -- 0.40 -- 0.45 ns tORP -- Output routing pool delay -- 0.40 -- 0.40 -- 0.40 ns tBLA tROUTE Additional block loading adder -- 0.04 -- 0.05 -- 0.05 ns tIOI Input Adjusters LVTTL_in tIN, tGCLK_IN, tGOE Using LVTTL standard -- 0.60 -- 0.60 -- 0.60 ns LVCMOS33_in tIN, tGCLK_IN, tGOE Using LVCMOS 3.3 standard -- 0.60 -- 0.60 -- 0.60 ns LVCMOS25_in tIN, tGCLK_IN, tGOE Using LVCMOS 2.5 standard -- 0.60 -- 0.60 -- 0.60 ns LVCMOS18_in tIN, tGCLK_IN, tGOE Using LVCMOS 1.8 standard -- 0.00 -- 0.00 -- 0.00 ns PCI_in tIN, tGCLK_IN, tGOE Using PCI compatible input -- 0.60 -- 0.60 -- 0.60 ns tIOO Output Adjusters LVTTL_out tBUF, tEN, tDIS Output configured as TTL buffer -- 0.20 -- 0.20 -- 0.20 ns LVCMOS33_out tBUF, tEN, tDIS Output configured as 3.3V buffer -- 0.20 -- 0.20 -- 0.20 ns LVCMOS25_out tBUF, tEN, tDIS Output configured as 2.5V buffer -- 0.10 -- 0.10 -- 0.10 ns LVCMOS18_out tBUF, tEN, tDIS Output configured as 1.8V buffer -- 0.00 -- 0.00 -- 0.00 ns PCI_out tBUF, tEN, tDIS Output configured as PCI compatible buffer -- 0.20 -- 0.20 -- 0.20 ns Slow Slew tBUF, tEN Output configured for slow slew rate -- 1.00 -- 1.00 -- 1.00 ns Note: Open drain timing is the same as corresponding LVCMOS timing. Timing v.2.2 1. Refer to TN1004, ispMACH 4000 Timing Model Design and Usage Guidelines for information regarding the use of these adders. 37 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000Z Timing Adders (Cont.)1 Adder Type Base Parameter -45 Description -5 -75 Min. Max. Min. Max. Min. Max. Units Optional Delay Adders tINDIO tINREG Input register delay -- 1.30 -- 1.30 -- 1.30 ns tEXP tMCELL Product term expander delay -- 0.45 -- 0.45 -- 0.50 ns tORP -- Output routing pool delay -- 0.40 -- 0.40 -- 0.40 ns tBLA tROUTE Additional block loading adder -- 0.05 -- 0.05 -- 0.05 ns tIOI Input Adjusters LVTTL_in tIN, tGCLK_IN, tGOE Using LVTTL standard -- 0.60 -- 0.60 -- 0.60 ns LVCMOS33_in tIN, tGCLK_IN, tGOE Using LVCMOS 3.3 standard -- 0.60 -- 0.60 -- 0.60 ns LVCMOS25_in tIN, tGCLK_IN, tGOE Using LVCMOS 2.5 standard -- 0.60 -- 0.60 -- 0.60 ns LVCMOS18_in tIN, tGCLK_IN, tGOE Using LVCMOS 1.8 standard -- 0.00 -- 0.00 -- 0.00 ns PCI_in tIN, tGCLK_IN, tGOE Using PCI compatible input -- 0.60 -- 0.60 -- 0.60 ns tIOO Output Adjusters LVTTL_out tBUF, tEN, tDIS Output configured as TTL buffer -- 0.20 -- 0.20 -- 0.20 ns LVCMOS33_out tBUF, tEN, tDIS Output configured as 3.3V buffer -- 0.20 -- 0.20 -- 0.20 ns LVCMOS25_out tBUF, tEN, tDIS Output configured as 2.5V buffer -- 0.10 -- 0.10 -- 0.10 ns LVCMOS18_out tBUF, tEN, tDIS Output configured as 1.8V buffer -- 0.00 -- 0.00 -- 0.00 ns PCI_out tBUF, tEN, tDIS Output configured as PCI compatible buffer -- 0.20 -- 0.20 -- 0.20 ns Slow Slew tBUF, tEN Output configured for slow slew rate -- 1.00 -- 1.00 -- 1.00 ns Note: Open drain timing is the same as corresponding LVCMOS timing. Timing v.2.2 1. Refer to TN1004, ispMACH 4000 Timing Model Design and Usage Guidelines for information regarding use of these adders. 38 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Boundary Scan Waveforms and Timing Specifications Symbol Parameter Min. Max. Units 40 -- ns tBTCP TCK [BSCAN test] clock cycle tBTCH TCK [BSCAN test] pulse width high 20 -- ns tBTCL TCK [BSCAN test] pulse width low 20 -- ns tBTSU TCK [BSCAN test] setup time 8 -- ns tBTH TCK [BSCAN test] hold time 10 -- ns tBRF TCK [BSCAN test] rise and fall time 50 -- mV/ns tBTCO TAP controller falling edge of clock to valid output -- 10 ns tBTOZ TAP controller falling edge of clock to data output disable -- 10 ns tBTVO TAP controller falling edge of clock to data output enable -- 10 ns tBTCPSU BSCAN test Capture register setup time 8 -- ns tBTCPH BSCAN test Capture register hold time 10 -- ns tBTUCO BSCAN test Update reg, falling edge of clock to valid output -- 25 ns tBTUOZ BSCAN test Update reg, falling edge of clock to output disable -- 25 ns tBTUOV BSCAN test Update reg, falling edge of clock to output enable -- 25 ns 39 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Power Consumption ispMACH 4000Z Typical ICC vs. Frequency (Preliminary Information) ispMACH 4000V/B Typical ICC vs. Frequency ispMACH 4000C Typical ICC vs. Frequency 4512V/B 100 300 300 4512C 80 250 200 150 ICC (mA) 60 ICC (mA) ICC (mA) 4384V/B 250 4384C 4256ZC 4256C 200 4256V/B 150 40 4128ZC 100 100 4128V/B 4128C 4064ZC 20 50 4032ZC 4064C 4064V/B 50 4032V/B 4032C 0 0 50 100 150 200 250 300 0 0 50 Frequency (MHz) 100 150 200 250 300 350 400 0 0 50 Frequency (MHz) Note: The devices are configured with maximum number of 16-bit counters, typical current at 1.8V, 25C. Note: The devices are configured with maximum number of 16-bit counters, typical current at 1.8V, 25C. 100 150 A B ispMACH 4032V/B 11.3 0.010 ispMACH 4032C 1.3 0.010 ispMACH 4064V/B 11.5 0.010 ispMACH 4064C 1.5 0.010 ispMACH 4128V/B 11.5 0.011 ispMACH 4128C 1.5 0.011 ispMACH 4256V/B 12 0.011 ispMACH 4256C 2 0.011 ispMACH 4384V/B 12.5 0.013 ispMACH 4384C 2.5 0.013 ispMACH 4512V/B 13 0.013 ispMACH 4512C 3 0.013 ispMACH 4032ZC 0.010 0.010 ispMACH 4064ZC 0.011 0.010 ispMACH 4128ZC 0.012 0.010 ispMACH 4256ZC 0.013 0.010 1. For further information about the use of these coefficients, refer to TN1005, Power Estimation in ispMACH 4000V/B/C/Z Devices. 40 250 300 350 400 Note: The devices are configured with maximum number of 16-bit counters, typical current at 3.3V, 2.5V, 25C. Power Estimation Coefficients1 Device 200 Frequency (MHz) Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Switching Test Conditions Figure 12 shows the output test load that is used for AC testing. The specific values for resistance, capacitance, voltage, and other test conditions are shown in Table 11. Figure 12. Output Test Load, LVTTL and LVCMOS Standards VCCO R1 Test Point DUT R2 CL 0213A/ispm4k Table 11. Test Fixture Required Components Test Condition LVCMOS I/O, (L -> H, H -> L) R1 CL1 R2 106 106 35pF Timing Ref. VCCO LVCMOS 3.3 = 1.5V LVCMOS 3.3 = 3.0V LVCMOS 2.5 = VCCO/2 LVCMOS 2.5 = 2.3V LVCMOS 1.8 = VCCO/2 LVCMOS 1.8 = 1.65V LVCMOS I/O (Z -> H) 106 35pF 1.5V 3.0V LVCMOS I/O (Z -> L) 106 35pF 1.5V 3.0V LVCMOS I/O (H -> Z) 106 5pF VOH - 0.3 3.0V LVCMOS I/O (L -> Z) 106 5pF VOL + 0.3 3.0V 1. CL includes test fixtures and probe capacitance. 41 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Signal Descriptions Signal Names Description TMS Input - This pin is the IEEE 1149.1 Test Mode Select input, which is used to control the state machine. TCK Input - This pin is the IEEE 1149.1 Test Clock input pin, used to clock through the state machine. TDI Input - This pin is the IEEE 1149.1 Test Data In pin, used to load data. TDO Output - This pin is the IEEE 1149.1 Test Data Out pin used to shift data out. GOE0/IO, GOE1/IO These pins are configured to be either Global Output Enable Input or as general I/O pins. GND Ground NC Not Connected VCC The power supply pins for logic core and JTAG port. CLK0/I, CLK1/I, CLK2/I, CLK3/I These pins are configured to be either CLK input or as an input. VCCO0, VCCO1 The power supply pins for each I/O bank. Input/Output1 - These are the general purpose I/O used by the logic array. y is GLB reference (alpha) and z is macrocell reference (numeric). z: 0-15. yzz ispMACH 4032 y: A-B ispMACH 4064 y: A-D ispMACH 4128 y: A-H ispMACH 4256 y: A-P ispMACH 4384 y: A-P, AX-HX ispMACH 4512 y: A-P, AX-PX 1. In some packages, certain I/Os are only available for use as inputs. See the signal connections table for details. ispMACH 4000V/B/C ORP Reference Table 4032V/B/C Number of I/Os 4064V/B/C 2 4128V/B/C 3 4256V/B/C 4 4384V/B/C 4512V/B/C 32 30 32 64 64 92 96 64 96 128 160 128 192 128 208 Number of GLBs 2 2 4 4 4 8 8 8 16 16 16 16 16 16 16 16 Number of I/Os / GLB 16 16 8 8 16 8 12 12 4 8 8 10 8 8 8 Mixture of 8 & 45 Reference ORP Table 16 I/Os / GLB 8 I/Os / GLB 8 I/Os / GLB 4 I/Os / GLB 1. 2. 3. 4. 5. 30 1 8 I/Os / GLB 16 I/Os / 8 I/Os / 12 I/Os / 4 I/Os / 8 I/Os / 8 I/Os / 10 I/Os / GLB GLB GLB GLB GLB GLB GLB 8 I/Os / GLB 32-macrocell device, 44 TQFP: 2 GLBs have 15 out of 16 I/Os bonded out. 64-macrocells device, 44 TQFP: 2 GLBs have 7 out of 8 I/Os bonded out. 128-macrocell device, 128 TQFP: 4 GLBs have 11 out of 12 I/Os 256-macrocell device, 144 TQFP: 16 GLBs have 6 I/Os per 512-macrocell device: 20 GLBs have 8 I/Os per, 12 GLBs have 4 I/Os per ispMACH 4000Z ORP Reference Table 4032Z 4064Z 4128Z 4256Z Number of I/Os 32 32 64 64 96 64 961 128 Number of GLBs 2 4 4 8 8 16 16 16 Number of I/Os / GLB 16 8 16 8 12 4 8 8 Reference ORP Table 16 I/Os / GLB 8 I/Os / GLB 16 I/Os / GLB 8 I/Os / GLB 12 I/Os / GLB 4 I/Os / GLB 8 I/Os / GLB 8 I/Os / GLB 1. 256-macrocell device, 132 csBGA: 16 GLBs have 6 I/Os per 42 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V/B/C/Z Power Supply and NC Connections1 44-pin TQFP2 Signal VCC 11, 33 48-pin TQFP2 56-ball csBGA3 100-pin TQFP2 128-pin TQFP2 12, 36 K2, A9 25, 40, 75, 90 32, 51, 96, 115 VCCO0 6 VCCO (Bank 0) 6 F3 13, 33, 95 3, 17, 30, 41, 122 VCCO1 28 VCCO (Bank 1) 30 E8 45, 63, 83 58, 67, 81, 94, 105 GND 12, 34 13, 37 H3, C8 1, 26, 51, 76 1, 33, 65, 97 GND (Bank 0) 5 5 D3 7, 18, 32, 96 10, 24, 40, 113, 123 GND (Bank 1) 27 29 G8 46, 57, 68, 82 49, 59, 74, 88, 104 -- 4032Z: A8, B10, E1, -- E3, F8, F10, J1, K3 NC -- -- 1. All grounds must be electrically connected at the board level. However, for the purposes of I/O current loading, grounds are associated with the bank shown. 2. Pin orientation follows the conventional order from pin 1 marking of the top side view and counter-clockwise. 3. Pin orientation A1 starts from the upper left corner of the top side view with alphabetical order ascending vertically and numerical order ascending horizontally. 43 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V/B/C/Z Power Supply and NC Connections1 (Cont.) Signal VCC 132-ball csBGA7 P1, A14, B7, N8 144-pin TQFP4 176-pin TQFP4 256-ball ftBGA/fpBGA2, 3, 7, 9 36, 57, 108, 129 42, 69, 88, 130, 157, 176 B2, B15, G8, G9, K8, K9, R2, R15 VCCO0 G3, P5, C18, M28, VCCO (Bank 0) C5 3, 19, 34, 47, 136 4, 22, 40, 56, 166 D6, F4, H7, J7, L4, N6 VCCO1 M10, M148, H12, VCCO (Bank 1) A10, C138 64, 75, 91, 106, 119 78, 92, 110, 128, 144 GND B1, P2, N14, A13 GND (Bank 0) E2, K2, N4, B4 2, 465, 65, 90, 134, A1, A16, C6, C11, F3, F14, G7, G10, H8, 153 H9, J8, J9, K7, K10, L3, L14, P6, P11, T1, T16 6 10, 18 , 27, 46, 127, 13, 31, 55, 155, 137 167 GND (Bank 1) N11, K13, E13, B11 55, 65, 82, 906, 99, 118 NC 4064Z: C1, C3, E1, E3, H2, J3, K1, M2, M4, N5, P7, P8, M8, P10, P11, P14, M12, K14, K12, G13, G14, E14, C13, B13, B10, C10, A7, B5, A5, A4, A1 D11, F13, H10, J10, L13, N11 1, 37, 73, 109 67, 79, 101, 119, 143 4128V: 17, 20, 38, 1, 43, 44, 45, 89, 45, 72, 89, 92, 110, 131, 132, 133 117, 144 4256V: 18, 90 4128Z: P8, A7 4256V/B/C, 128 I/O: A4, A5, A6, A11, A12, A13, A15, B5, B6, B11, B12, B14, C7, D1, D4, D5, D10, D12, D16, E1, E2, E4, E5, E7, E10, E13, E14, E15, E16, F1, F2, F15, F16, G1, G4, G5, G6, G12, G13, G14, J11, K3, K4, K15, L1, L2, L12, L15, L16, M1, M2, M3, M4, M5, M12, M13, M15, M16, N1, N2, N7, N10, N12, N14, P5, P12, R4, R5, R6, R11, R12, R16, T2, T4, T5, T6, T11, T12, T13, T15 4256V/B/C, 160 I/O: A5, A12, A15, B5, B6, B11, B12, B14, D4, D5, D12, E1, E4, E5, E13, E15, E16, F1, F2, F15, G1, G5, G12, G14, L1, L2, L12, L15, L16, M1, M2, M3, M12, M16, N1, N12, N14, P5, R4, R5, R6, R11, R12, R16, T4, T5, T12, T15 4384V/B/C: B5, B12, D5, D12, E1, E15, E16, F2, L12, M1, M2, M16, N12, R5, R12, T4 4512V/B/C: None 1. All grounds must be electrically connected at the board level. However, for the purposes of I/O current loading, grounds are associated with the bank shown. 2. Internal GNDs and I/O GNDs (Bank 0/1) are connected inside package. 3. VCCO balls connect to two power planes within the package, one for VCCO0 and one for VCCO1. 4. Pin orientation follows the conventional order from pin 1 marking of the top side view and counter-clockwise. 5. ispMACH 4384V/B/C pin 46 is tied to GND (Bank 0). 6. ispMACH 4128V only. 7. Pin orientation A1 starts from the upper left corner of the top side view with alphabetical order ascending vertically and numerical order ascending horizontally. 8. ispMACH 4128Z and 4256Z only. NC for ispMACH 4064Z. 9. Use 256 ftBGA package for all new designs. Refer to PCN#14A-07 for 256 fpBGA package discontinuance. 44 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4032V/B/C and 4064V/B/C Logic Signal Connections: 44-Pin TQFP ispMACH 4032V/B/C Pin Number ORP ispMACH 4064V/B/C Bank Number GLB/MC/Pad GLB/MC/Pad ORP 1 - TDI - TDI - 2 0 A5 A^5 A10 A^5 3 0 A6 A^6 A12 A^6 4 0 A7 A^7 A14 A^7 5 0 GND (Bank 0) - GND (Bank 0) - 6 0 VCCO (Bank 0) - VCCO (Bank 0) - 7 0 A8 A^8 B0 B^0 8 0 A9 A^9 B2 B^1 9 0 A10 A^10 B4 B^2 10 - TCK - TCK - 11 - VCC - VCC - 12 - GND - GND - 13 0 A12 A^12 B8 B^4 14 0 A13 A^13 B10 B^5 15 0 A14 A^14 B12 B^6 16 0 A15 A^15 B14 B^7 17 1 CLK2/I - CLK2/I - 18 1 B0 B^0 C0 C^0 19 1 B1 B^1 C2 C^1 20 1 B2 B^2 C4 C^2 21 1 B3 B^3 C6 C^3 22 1 B4 B^4 C8 C^4 23 - TMS - TMS - 24 1 B5 B^5 C10 C^5 25 1 B6 B^6 C12 C^6 26 1 B7 B^7 C14 C^7 27 1 GND (Bank 1) - GND (Bank 1) - 28 1 VCCO (Bank 1) - VCCO (Bank 1) - 29 1 B8 B^8 D0 D^0 30 1 B9 B^9 D2 D^1 31 1 B10 B^10 D4 D^2 32 - TDO - TDO - 33 - VCC - VCC - 34 - GND - GND - 35 1 B12 B^12 D8 D^4 36 1 B13 B^13 D10 D^5 37 1 B14 B^14 D12 D^6 38 1 B15/GOE1 B^15 D14/GOE1 D^7 39 0 CLK0/I - CLK0/I - 40 0 A0/GOE0 A^0 A0/GOE0 A^0 41 0 A1 A^1 A2 A^1 45 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4032V/B/C and 4064V/B/C Logic Signal Connections: 44-Pin TQFP (Cont.) ispMACH 4032V/B/C ispMACH 4064V/B/C Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP 42 0 A2 A^2 A4 A^2 43 0 A3 A^3 A6 A^3 44 0 A4 A^4 A8 A^4 ispMACH 4032V/B/C/Z and 4064V/B/C/Z Logic Signal Connections: 48-Pin TQFP ispMACH 4032V/B/C/Z ispMACH 4064V/B/C ispMACH 4064Z Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP 1 - TDI - TDI - TDI - 2 0 A5 A^5 A10 A^5 A8 A^5 3 0 A6 A^6 A12 A^6 A10 A^6 4 0 A7 A^7 A14 A^7 A11 A^7 5 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - 6 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - 7 0 A8 A^8 B0 B^0 B15 B^7 8 0 A9 A^9 B2 B^1 B12 B^6 9 0 A10 A^10 B4 B^2 B10 B^5 10 0 A11 A^11 B6 B^3 B8 B^4 11 - TCK - TCK - TCK - 12 - VCC - VCC - VCC - 13 - GND - GND - GND - 14 0 A12 A^12 B8 B^4 B6 B^3 15 0 A13 A^13 B10 B^5 B4 B^2 16 0 A14 A^14 B12 B^6 B2 B^1 17 0 A15 A^15 B14 B^7 B0 B^0 18 0 CLK1/I - CLK1/I - CLK1/I - 19 1 CLK2/I - CLK2/I - CLK2/I - 20 1 B0 B^0 C0 C^0 C0 C^0 21 1 B1 B^1 C2 C^1 C1 C^1 22 1 B2 B^2 C4 C^2 C2 C^2 23 1 B3 B^3 C6 C^3 C4 C^3 24 1 B4 B^4 C8 C^4 C6 C^4 25 - TMS - TMS - TMS - 26 1 B5 B^5 C10 C^5 C8 C^5 27 1 B6 B^6 C12 C^6 C10 C^6 28 1 B7 B^7 C14 C^7 C11 C^7 29 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - 30 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - 31 1 B8 B^8 D0 D^0 D15 D^7 32 1 B9 B^9 D2 D^1 D12 D^6 46 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4032V/B/C/Z and 4064V/B/C/Z Logic Signal Connections: 48-Pin TQFP (Cont.) ispMACH 4032V/B/C/Z ispMACH 4064V/B/C ispMACH 4064Z Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP 33 1 B10 B^10 D4 D^2 D10 D^5 34 1 B11 B^11 D6 D^3 D8 D^4 35 - TDO - TDO - TDO - 36 - VCC - VCC - VCC - 37 - GND - GND - GND - 38 1 B12 B^12 D8 D^4 D6 D^3 39 1 B13 B^13 D10 D^5 D4 D^2 40 1 B14 B^14 D12 D^6 D2 D^1 41 1 B15/GOE1 B^15 D14/GOE1 D^7 D0/GOE1 D^0 42 1 CLK3/I - CLK3/I - CLK3/I - 43 0 CLK0/I - CLK0/I - CLK0/I - 44 0 A0/GOE0 A^0 A0/GOE0 A^0 A0/GOE0 A^0 45 0 A1 A^1 A2 A^1 A1 A^1 46 0 A2 A^2 A4 A^2 A2 A^2 47 0 A3 A^3 A6 A^3 A4 A^3 48 0 A4 A^4 A8 A^4 A6 A^4 ispMACH 4032Z and 4064Z Logic Signal Connections: 56-Ball csBGA ispMACH 4032Z ispMACH 4064Z Ball Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP B1 - TDI - TDI - C3 0 A5 A^5 A8 A^5 C1 0 A6 A^6 A10 A^6 D1 0 A7 A^7 A11 A^7 D3 0 GND (Bank 0) - GND (Bank 0) - 1 1 - E3 0 NC - I E1 0 NC1 - I1 F3 0 VCCO (Bank 0) - VCCO (Bank 0) - F1 0 A8 A^8 B15 B^7 G3 0 A9 A^9 B12 B^6 G1 0 A10 A^10 B10 B^5 H1 0 A11 A^11 B8 B^4 J1 0 NC - I - K1 - TCK - TCK - K2 - VCC - VCC - H3 - GND - GND - K3 - NC1 - I1 - K4 0 A12 A^12 B6 B^3 H4 0 A13 A^13 B4 B^2 H5 0 A14 A^14 B2 B^1 47 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4032Z and 4064Z Logic Signal Connections: 56-Ball csBGA (Cont.) ispMACH 4032Z ispMACH 4064Z Ball Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP K5 0 A15 A^15 B0 B^0 H6 0 CLK1/I - CLK1/I - K6 1 CLK2/I - CLK2/I - H7 1 B0 B^0 C0 C^0 K7 1 B1 B^1 C1 C^1 K8 1 B2 B^2 C2 C^2 K9 1 B3 B^3 C4 C^3 K10 1 B4 B^4 C6 C^4 J10 - TMS - TMS - H8 1 B5 B^5 C8 C^5 H10 1 B6 B^6 C10 C^6 G10 1 B7 B^7 C11 C^7 G8 1 GND (Bank 1) - GND (Bank 1) - F8 1 NC1 - I1 - F10 1 NC1 - I1 - E8 1 VCCO (Bank 1) - VCCO (Bank 1) - E10 1 B8 B^8 D15 D^7 D8 1 B9 B^9 D12 D^6 D10 1 B10 B^10 D10 D^5 C10 1 B11 B^11 D8 D^4 B10 1 NC1 - I1 - A10 - TDO - TDO - A9 - VCC - VCC - C8 - GND - GND - 1 - 1 A8 1 NC - I A7 1 B12 B^12 D6 D^3 C7 1 B13 B^13 D4 D^2 C6 1 B14 B^14 D2 D^1 A6 1 B15/GOE1 B^15 D0/GOE1 D^0 C5 1 CLK3/I - CLK3/I - A5 0 CLK0/I - CLK0/I - C4 0 A0/GOE0 A^0 A0/GOE0 A^0 A4 0 A1 A^1 A1 A^1 A3 0 A2 A^2 A2 A^2 A2 0 A3 A^3 A4 A^3 A1 0 A4 A^4 A6 A^4 1. For device migration considerations, these NC pins are input signal pins in ispMACH 4064Z devices. 48 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4064V/B/C/Z, 4128V/B/C/Z, 4256V/B/C/Z Logic Signal Connections: 100-Pin TQFP ispMACH 4064V/B/C/Z ispMACH 4128V/B/C/Z ispMACH 4256V/B/C/Z Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP 1 - GND - GND - GND - 2 - TDI - TDI - TDI - 3 0 A8 A^8 B0 B^0 C12 C^3 4 0 A9 A^9 B2 B^1 C10 C^2 5 0 A10 A^10 B4 B^2 C6 C^1 6 0 A11 A^11 B6 B^3 C2 C^0 7 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - 8 0 A12 A^12 B8 B^4 D12 D^3 9 0 A13 A^13 B10 B^5 D10 D^2 10 0 A14 A^14 B12 B^6 D6 D^1 11 0 A15 A^15 B13 B^7 D4 D^0 12* 0 I - I - I - 13 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - 14 0 B15 B^15 C14 C^7 E4 E^0 15 0 B14 B^14 C12 C^6 E6 E^1 16 0 B13 B^13 C10 C^5 E10 E^2 17 0 B12 B^12 C8 C^4 E12 E^3 18 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - 19 0 B11 B^11 C6 C^3 F2 F^0 20 0 B10 B^10 C5 C^2 F6 F^1 21 0 B9 B^9 C4 C^1 F10 F^2 22 0 B8 B^8 C2 C^0 F12 F^3 23* 0 I - I - I - 24 - TCK - TCK - TCK - 25 - VCC - VCC - VCC - 26 - GND - GND - GND - 27* 0 I - I - I - 28 0 B7 B^7 D13 D^7 G12 G^3 29 0 B6 B^6 D12 D^6 G10 G^2 30 0 B5 B^5 D10 D^5 G6 G^1 31 0 B4 B^4 D8 D^4 G2 G^0 32 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - 33 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - 34 0 B3 B^3 D6 D^3 H12 H^3 35 0 B2 B^2 D4 D^2 H10 H^2 36 0 B1 B^1 D2 D^1 H6 H^1 37 0 B0 B^0 D0 D^0 H2 H^0 38 0 CLK1/I - CLK1/I - CLK1/I - 39 1 CLK2/I - CLK2/I - CLK2/I - 40 - VCC - VCC - VCC - 41 1 C0 C^0 E0 E^0 I2 I^0 49 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4064V/B/C/Z, 4128V/B/C/Z, 4256V/B/C/Z Logic Signal Connections: 100-Pin TQFP (Cont.) ispMACH 4064V/B/C/Z ispMACH 4128V/B/C/Z ispMACH 4256V/B/C/Z Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP 42 1 C1 C^1 E2 E^1 I6 I^1 43 1 C2 C^2 E4 E^2 I10 I^2 44 1 C3 C^3 E6 E^3 I12 I^3 45 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - 46 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - 47 1 C4 C^4 E8 E^4 J2 J^0 48 1 C5 C^5 E10 E^5 J6 J^1 49 1 C6 C^6 E12 E^6 J10 J^2 50 1 C7 C^7 E14 E^7 J12 J^3 51 - GND - GND - GND - 52 - TMS - TMS - TMS - 53 1 C8 C^8 F0 F^0 K12 K^3 54 1 C9 C^9 F2 F^1 K10 K^2 55 1 C10 C^10 F4 F^2 K6 K^1 56 1 C11 C^11 F6 F^3 K2 K^0 57 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - 58 1 C12 C^12 F8 F^4 L12 L^3 59 1 C13 C^13 F10 F^5 L10 L^2 60 1 C14 C^14 F12 F^6 L6 L^1 61 1 C15 C^15 F13 F^7 L4 L^0 62* 1 I - I - I - 63 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - 64 1 D15 D^15 G14 G^7 M4 M^0 65 1 D14 D^14 G12 G^6 M6 M^1 66 1 D13 D^13 G10 G^5 M10 M^2 67 1 D12 D^12 G8 G^4 M12 M^3 68 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - 69 1 D11 D^11 G6 G^3 N2 N^0 70 1 D10 D^10 G5 G^2 N6 N^1 71 1 D9 D^9 G4 G^1 N10 N^2 72 1 D8 D^8 G2 G^0 N12 N^3 73* 1 I - I - I - 74 - TDO - TDO - TDO - 75 - VCC - VCC - VCC - 76 - GND - GND - GND - 77* 1 I - I - I - 78 1 D7 D^7 H13 H^7 O12 O^3 79 1 D6 D^6 H12 H^6 O10 O^2 80 1 D5 D^5 H10 H^5 O6 O^1 81 1 D4 D^4 H8 H^4 O2 O^0 82 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - 50 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4064V/B/C/Z, 4128V/B/C/Z, 4256V/B/C/Z Logic Signal Connections: 100-Pin TQFP (Cont.) ispMACH 4064V/B/C/Z ispMACH 4128V/B/C/Z ispMACH 4256V/B/C/Z Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP 83 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - 84 1 D3 D^3 H6 H^3 P12 P^3 85 1 D2 D^2 H4 H^2 P10 P^2 86 1 D1 D^1 H2 H^1 P6 P^1 87 1 D0/GOE1 D^0 H0/GOE1 H^0 P2/OE1 P^0 88 1 CLK3/I - CLK3/I - CLK3/I - 89 0 CLK0/I - CLK0/I - CLK0/I - 90 - VCC - VCC - VCC - 91 0 A0/GOE0 A^0 A0/GOE0 A^0 A2/GOE0 A^0 92 0 A1 A^1 A2 A^1 A6 A^1 93 0 A2 A^2 A4 A^2 A10 A^2 94 0 A3 A^3 A6 A^3 A12 A^3 95 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - 96 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - 97 0 A4 A^4 A8 A^4 B2 B^0 98 0 A5 A^5 A10 A^5 B6 B^1 99 0 A6 A^6 A12 A^6 B10 B^2 100 0 A7 A^7 A14 A^7 B12 B^3 *This pin is input only. ispMACH 4128V/B/C Logic Signal Connections: 128-Pin TQFP ispMACH 4128V/B/C Pin Number Bank Number GLB/MC/Pad ORP 1 0 GND - 2 0 TDI - 3 0 VCCO (Bank 0) - 4 0 B0 B^0 5 0 B1 B^1 6 0 B2 B^2 7 0 B4 B^3 8 0 B5 B^4 9 0 B6 B^5 10 0 GND (Bank 0) - 11 0 B8 B^6 12 0 B9 B^7 13 0 B10 B^8 14 0 B12 B^9 15 0 B13 B^10 16 0 B14 B^11 17 0 VCCO (Bank 0) - 18 0 C14 C^11 51 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4128V/B/C Logic Signal Connections: 128-Pin TQFP (Cont.) ispMACH 4128V/B/C Pin Number Bank Number GLB/MC/Pad ORP 19 0 C13 C^10 20 0 C12 C^9 21 0 C10 C^8 22 0 C9 C^7 23 0 C8 C^6 24 0 GND (Bank 0) - 25 0 C6 C^5 26 0 C5 C^4 27 0 C4 C^3 28 0 C2 C^2 29 0 C0 C^0 30 0 VCCO (Bank 0) - 31 0 TCK - 32 0 VCC - 33 0 GND - 34 0 D14 D^11 35 0 D13 D^10 36 0 D12 D^9 37 0 D10 D^8 38 0 D9 D^7 39 0 D8 D^6 40 0 GND (Bank 0) - 41 0 VCCO (Bank 0) - 42 0 D6 D^5 43 0 D5 D^4 44 0 D4 D^3 45 0 D2 D^2 46 0 D1 D^1 47 0 D0 D^0 48 0 CLK1/I - 49 1 GND (Bank 1) - 50 1 CLK2/I - 51 1 VCC - 52 1 E0 E^0 53 1 E1 E^1 54 1 E2 E^2 55 1 E4 E^3 56 1 E5 E^4 57 1 E6 E^5 58 1 VCCO (Bank 1) - 59 1 GND (Bank 1) - 60 1 E8 E^6 61 1 E9 E^7 52 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4128V/B/C Logic Signal Connections: 128-Pin TQFP (Cont.) ispMACH 4128V/B/C Pin Number Bank Number GLB/MC/Pad ORP 62 1 E10 E^8 63 1 E12 E^9 64 1 E14 E^11 65 1 GND - 66 1 TMS - 67 1 VCCO (Bank 1) - 68 1 F0 F^0 69 1 F1 F^1 70 1 F2 F^2 71 1 F4 F^3 72 1 F5 F^4 73 1 F6 F^5 74 1 GND (Bank 1) - 75 1 F8 F^6 76 1 F9 F^7 77 1 F10 F^8 78 1 F12 F^9 79 1 F13 F^10 80 1 F14 F^11 81 1 VCCO (Bank 1) - 82 1 G14 G^11 83 1 G13 G^10 84 1 G12 G^9 85 1 G10 G^8 86 1 G9 G^7 87 1 G8 G^6 88 1 GND (Bank 1) - 89 1 G6 G^5 90 1 G5 G^4 91 1 G4 G^3 92 1 G2 G^2 93 1 G0 G^0 94 1 VCCO (Bank 1) - 95 1 TDO - 96 1 VCC - 97 1 GND - 98 1 H14 H^11 99 1 H13 H^10 100 1 H12 H^9 101 1 H10 H^8 102 1 H9 H^7 103 1 H8 H^6 104 1 GND (Bank 1) - 53 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4128V/B/C Logic Signal Connections: 128-Pin TQFP (Cont.) ispMACH 4128V/B/C Pin Number Bank Number GLB/MC/Pad ORP 105 1 VCCO (Bank 1) - 106 1 H6 H^5 107 1 H5 H^4 108 1 H4 H^3 109 1 H2 H^2 110 1 H1 H^1 111 1 H0/GOE1 H^0 112 1 CLK3/I - 113 0 GND (Bank 0) - 114 0 CLK0/I - 115 0 VCC - 116 0 A0/GOE0 A^0 117 0 A1 A^1 118 0 A2 A^2 119 0 A4 A^3 120 0 A5 A^4 121 0 A6 A^5 122 0 VCCO (Bank 0) - 123 0 GND (Bank 0) - 124 0 A8 A^6 125 0 A9 A^7 126 0 A10 A^8 127 0 A12 A^9 128 0 A14 A^11 ispMACH 4064Z, 4128Z and 4256Z Logic Signal Connections: 132-Ball csBGA ispMACH 4064Z Ball Number Bank Number GLB/MC/Pad ispMACH 4128Z ORP GLB/MC/Pad ispMACH 4256Z ORP GLB/MC/Pad ORP B1 - GND - GND - GND - B2 - TDI - TDI - TDI - C1 0 NC - VCCO (Bank 0) - VCCO (Bank 0) - C3 0 NC - B0 B^0 C12 C^6 C2 0 A8 A^8 B1 B^1 C10 C^5 D1 0 A9 A^9 B2 B^2 C8 C^4 D3 0 A10 A^10 B4 B^3 C6 C^3 D2 0 A11 A^11 B5 B^4 C4 C^2 B6 B^5 C2 C^1 - GND (Bank 0) - GND (Bank 0) - E1 0 NC E2 0 GND (Bank 0) 54 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4064Z, 4128Z and 4256Z Logic Signal Connections: 132-Ball csBGA (Cont.) ispMACH 4064Z Ball Number Bank Number GLB/MC/Pad E3 0 NC ispMACH 4128Z ispMACH 4256Z ORP GLB/MC/Pad ORP GLB/MC/Pad ORP - B8 B^6 D12 D^6 F2 0 A12 A^12 B9 B^7 D10 D^5 F1 0 A13 A^13 B10 B^8 D8 D^4 F3 0 A14 A^14 B12 B^9 D6 D^3 G1 0 A15 A^15 B13 B^10 D4 D^2 G2 0 I - B14 B^11 D2 D^1 G3 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - H2 0 NC - C14 C^11 E2 E^1 H1 0 B15 B^15 C13 C^10 E4 E^2 H3 0 B14 B^14 C12 C^9 E6 E^3 J1 0 B13 B^13 C10 C^8 E8 E^4 J2 0 B12 B^12 C9 C^7 E10 E^5 J3 0 NC - C8 C^6 E12 E^6 K2 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - K1 0 NC - C6 C^5 F2 F^1 K3 0 B11 B^11 C5 C^4 F4 F^2 L2 0 B10 B^10 C4 C^3 F6 F^3 L1 0 B9 B^9 C2 C^2 F8 F^4 L3 0 B8 B^8 C1 C^1 F10 F^5 M1 0 I - C0 C^0 F12 F^6 M2 0 NC - VCCO (Bank 0) - VCCO (Bank 0) - N1 - TCK - TCK - TCK - P1 - VCC - VCC - VCC - P2 - GND - GND - GND - N2 0 I - D14 D^11 G12 G^6 P3 0 B7 B^7 D13 D^10 G10 G^5 M3 0 B6 B^6 D12 D^9 G8 G^4 N3 0 B5 B^5 D10 D^8 G6 G^3 P4 0 B4 B^4 D9 D^7 G4 G^2 M4 0 NC - D8 D^6 G2 G^1 N4 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - P5 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - N5 0 NC - D6 D^5 H12 H^6 M5 0 B3 B^3 D5 D^4 H10 H^5 N6 0 B2 B^2 D4 D^3 H8 H^4 P6 0 B1 B^1 D2 D^2 H6 H^3 M6 0 B0 B^0 D1 D^1 H4 H^2 P7 0 NC - D0 D^0 H2 H^1 N7 0 CLK1/I - CLK1/I - CLK1/I - M7 1 CLK2/I - CLK2/I - CLK2/I - N8 - VCC - VCC - VCC - 55 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4064Z, 4128Z and 4256Z Logic Signal Connections: 132-Ball csBGA (Cont.) ispMACH 4064Z Ball Number Bank Number GLB/MC/Pad ispMACH 4128Z ispMACH 4256Z ORP GLB/MC/Pad ORP GLB/MC/Pad ORP - NC1 - I1 - NC - E0 E^0 I2 I^1 C0 C^0 E1 E^1 I4 I^2 P8 1 NC1 M8 1 P9 1 N9 1 C1 C^1 E2 E^2 I6 I^3 M9 1 C2 C^2 E4 E^3 I8 I^4 N10 1 C3 C^3 E5 E^4 I10 I^5 P10 1 NC - E6 E^5 I12 I^6 M10 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - N11 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - P11 1 NC - E8 E^6 J2 J^1 M11 1 C4 C^4 E9 E^7 J4 J^2 P12 1 C5 C^5 E10 E^8 J6 J^3 N12 1 C6 C^6 E12 E^9 J8 J^4 P13 1 C7 C^7 E13 E^10 J10 J^5 P14 1 NC - E14 E^11 J12 J^6 N14 - GND - GND - GND - N13 - TMS - TMS - TMS - M14 1 NC - VCCO (Bank 1) - VCCO (Bank 1) - M12 1 NC - F0 F^0 K12 K^6 M13 1 C8 C^8 F1 F^1 K10 K^5 L14 1 C9 C^9 F2 F^2 K8 K^4 L12 1 C10 C^10 F4 F^3 K6 K^3 L13 1 C11 C^11 F5 F^4 K4 K^2 K14 1 NC - F6 F^5 K2 K^1 K13 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - K12 1 NC - F8 F^6 L12 L^6 J13 1 C12 C^12 F9 F^7 L10 L^5 J14 1 C13 C^13 F10 F^8 L8 L^4 J12 1 C14 C^14 F12 F^9 L6 L^3 H14 1 C15 C^15 F13 F^10 L4 L^2 H13 1 I - F14 F^11 L2 L^1 H12 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - G13 1 NC - G14 G^11 M2 M^1 G14 1 NC - G13 G^10 M4 M^2 G12 1 D15 D^15 G12 G^9 M6 M^3 F14 1 D14 D^14 G10 G^8 M8 M^4 F13 1 D13 D^13 G9 G^7 M10 M^5 F12 1 D12 D^12 G8 G^6 M12 M^6 E13 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - E14 1 NC - G6 G^5 N2 N^1 E12 1 D11 D^11 G5 G^4 N4 N^2 56 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4064Z, 4128Z and 4256Z Logic Signal Connections: 132-Ball csBGA (Cont.) ispMACH 4064Z Ball Number Bank Number GLB/MC/Pad ispMACH 4128Z ispMACH 4256Z ORP GLB/MC/Pad ORP GLB/MC/Pad ORP D^10 G4 G^3 N6 N^3 G^2 N8 N^4 G^1 N10 N^5 G^0 N12 N^6 - VCCO (Bank 1) - D13 1 D10 D14 1 D9 D^9 G2 D12 1 D8 D^8 G1 C14 1 I - G0 C13 1 NC - VCCO (Bank 1) B14 - TDO - TDO - TDO - A14 - VCC - VCC - VCC - A13 - GND - GND - GND - B13 1 NC - H14 H^11 O12 O^6 A12 1 I - H13 H^10 O10 O^5 C12 1 D7 D^7 H12 H^9 O8 O^4 B12 1 D6 D^6 H10 H^8 O6 O^3 A11 1 D5 D^5 H9 H^7 O4 O^2 C11 1 D4 D^4 H8 H^6 O2 O^1 B11 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - A10 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - B10 1 NC - H6 H^5 P12 P^6 C10 1 NC - H5 H^4 P10 P^5 B9 1 D3 D^3 H4 H^3 P8 P^4 A9 1 D2 D^2 H2 H^2 P6 P^3 C9 1 D1 D^1 H1 H^1 P4 P^2 A8 1 D0/GOE1 D^0 H0/GOE1 H^0 P2/GOE1 P^1 B8 1 CLK3/I - CLK3/I - CLK3/I - C8 0 CLK0/I - CLK0/I - CLK0/I - B7 - VCC - VCC - VCC - A7 0 NC1 - NC1 - I1 - C7 0 A0/GOE0 A^0 A0/GOE0 A^0 A2/GOE0 A^1 A6 0 A1 A^1 A1 A^1 A4 A^2 B6 0 A2 A^2 A2 A^2 A6 A^3 C6 0 A3 A^3 A4 A^3 A8 A^4 B5 0 NC - A5 A^4 A10 A^5 A5 0 NC - A6 A^5 A12 A^6 C5 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - B4 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - A4 0 NC - A8 A^6 B2 B^1 C4 0 A4 A^4 A9 A^7 B4 B^2 A3 0 A5 A^5 A10 A^8 B6 B^3 B3 0 A6 A^6 A12 A^9 B8 B^4 A2 0 A7 A^7 A13 A^10 B10 B^5 A1 0 NC - A14 A^11 B12 B^6 1. For device migration considerations, these NC pins are input signal pins in ispMACH 4256Z device. 57 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4128V and 4256V Logic Signal Connections: 144-Pin TQFP ispMACH 4128V ispMACH 4256V Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP 1 - GND - GND - 2 - TDI - TDI - 3 0 VCCO (Bank 0) - VCCO (Bank 0) - 4 0 B0 B^0 C12 C^6 5 0 B1 B^1 C10 C^5 6 0 B2 B^2 C8 C^4 7 0 B4 B^3 C6 C^3 8 0 B5 B^4 C4 C^2 9 0 B6 B^5 C2 C^1 10 0 GND (Bank 0) - GND (Bank 0) - 11 0 B8 B^6 D14 D^7 12 0 B9 B^7 D12 D^6 13 0 B10 B^8 D10 D^5 14 0 B12 B^9 D8 D^4 15 0 B13 B^10 D6 D^3 16 0 B14 B^11 D4 D^2 17 - NC2 - I2 - 1 - NC - - VCCO (Bank 0) - 2 E^1 18 0 GND (Bank 0) 19 0 VCCO (Bank 0) 2 1 20 0 NC - I 21 0 C14 C^11 E2 22 0 C13 C^10 E4 E^2 23 0 C12 C^9 E6 E^3 24 0 C10 C^8 E8 E^4 25 0 C9 C^7 E10 E^5 26 0 C8 C^6 E12 E^6 27 0 GND (Bank 0) - GND (Bank 0) - 28 0 C6 C^5 F2 F^1 29 0 C5 C^4 F4 F^2 30 0 C4 C^3 F6 F^3 31 0 C2 C^2 F8 F^4 32 0 C1 C^1 F10 F^5 33 0 C0 C^0 F12 F^6 34 0 VCCO (Bank 0) - VCCO (Bank 0) - 35 - TCK - TCK - 36 - VCC - VCC - 37 - GND - GND - 38 0 NC2 - I2 - 39 0 D14 D^11 G12 G^6 40 0 D13 D^10 G10 G^5 41 0 D12 D^9 G8 G^4 42 0 D10 D^8 G6 G^3 58 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4128V and 4256V Logic Signal Connections: 144-Pin TQFP (Cont.) ispMACH 4128V ispMACH 4256V Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP 43 0 D9 D^7 G4 G^2 44 0 D8 D^6 G2 G^1 45 0 NC2 - I2 - 46 0 GND (Bank 0) - GND (Bank 0) - 47 0 VCCO (Bank 0) - VCCO (Bank 0) - 48 0 D6 D^5 H12 H^6 49 0 D5 D^4 H10 H^5 50 0 D4 D^3 H8 H^4 51 0 D2 D^2 H6 H^3 52 0 D1 D^1 H4 H^2 53 0 D0 D^0 H2 H^1 54 0 CLK1/I - CLK1/I - 55 1 GND (Bank 1) - GND (Bank 1) - 56 1 CLK2/I - CLK2/I - 57 - VCC - VCC - 58 1 E0 E^0 I2 I^1 59 1 E1 E^1 I4 I^2 60 1 E2 E^2 I6 I^3 61 1 E4 E^3 I8 I^4 62 1 E5 E^4 I10 I^5 63 1 E6 E^5 I12 I^6 64 1 VCCO (Bank 1) - VCCO (Bank 1) - 65 1 GND (Bank 1) - GND (Bank 1) - 66 1 E8 E^6 J2 J^1 67 1 E9 E^7 J4 J^2 68 1 E10 E^8 J6 J^3 69 1 E12 E^9 J8 J^4 70 1 E13 E^10 J10 J^5 71 1 E14 E^11 J12 J^6 72 1 2 NC - I 2 - 73 - GND - GND - 74 - TMS - TMS - 75 1 VCCO (Bank 1) - VCCO (Bank 1) - 76 1 F0 F^0 K12 K^6 77 1 F1 F^1 K10 K^5 78 1 F2 F^2 K8 K^4 79 1 F4 F^3 K6 K^3 80 1 F5 F^4 K4 K^2 K^1 81 1 F6 F^5 K2 82 1 GND (Bank 1) - GND (Bank 1) - 83 1 F8 F^6 L14 L^7 84 1 F9 F^7 L12 L^6 85 1 F10 F^8 L10 L^5 59 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4128V and 4256V Logic Signal Connections: 144-Pin TQFP (Cont.) ispMACH 4128V ispMACH 4256V Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP 86 1 F12 F^9 L8 L^4 87 1 F13 F^10 L6 L^3 88 1 F14 F^11 L4 L^2 1 2 - 2 - 89 NC I 1 - NC - - VCCO (Bank 1) - 2 - 90 1 GND (Bank 1) 91 1 VCCO (Bank 1) 2 1 92 1 NC - I 93 1 G14 G^11 M2 M^1 94 1 G13 G^10 M4 M^2 95 1 G12 G^9 M6 M^3 96 1 G10 G^8 M8 M^4 97 1 G9 G^7 M10 M^5 M^6 98 1 G8 G^6 M12 99 1 GND (Bank 1) - GND (Bank 1) - 100 1 G6 G^5 N2 N^1 101 1 G5 G^4 N4 N^2 102 1 G4 G^3 N6 N^3 103 1 G2 G^2 N8 N^4 104 1 G1 G^1 N10 N^5 105 1 G0 G^0 N12 N^6 106 1 VCCO (Bank 1) - VCCO (Bank 1) - 107 - TDO - TDO - 108 - VCC - VCC - 109 - GND - GND - 2 - 2 110 1 NC - I 111 1 H14 H^11 O12 O^6 112 1 H13 H^10 O10 O^5 113 1 H12 H^9 O8 O^4 114 1 H10 H^8 O6 O^3 115 1 H9 H^7 O4 O^2 116 1 H8 H^6 O2 O^1 117 1 NC2 - I2 - 118 1 GND (Bank 1) - GND (Bank 1) - 119 1 VCCO (Bank 1) - VCCO (Bank 1) - 120 1 H6 H^5 P12 P^6 121 1 H5 H^4 P10 P^5 122 1 H4 H^3 P8 P^4 123 1 H2 H^2 P6 P^3 124 1 H1 H^1 P4 P^2 125 1 H0/GOE1 H^0 P2/GOE1 P^1 126 1 CLK3/I - CLK3/I - 127 0 GND (Bank 0) - GND (Bank 0) - 128 0 CLK0/I - CLK0/I - 60 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4128V and 4256V Logic Signal Connections: 144-Pin TQFP (Cont.) ispMACH 4128V ispMACH 4256V Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP 129 - VCC - VCC - 130 0 A0/GOE0 A^0 A2/GOE0 A^1 131 0 A1 A^1 A4 A^2 132 0 A2 A^2 A6 A^3 133 0 A4 A^3 A8 A^4 134 0 A5 A^4 A10 A^5 135 0 A6 A^5 A12 A^6 136 0 VCCO (Bank 0) - VCCO (Bank 0) - 137 0 GND (Bank 0) - GND (Bank 0) - 138 0 A8 A^6 B2 B^1 139 0 A9 A^7 B4 B^2 140 0 A10 A^8 B6 B^3 141 0 A12 A^9 B8 B^4 142 0 A13 A^10 B10 B^5 143 0 A14 A^11 B12 B^6 0 2 - 2 - 144 NC I 1. For device migration considerations, these NC pins are GND pins for I/O banks in ispMACH 4128V devices. 2. For device migration considerations, these NC pins are input signal pins in ispMACH 4256V devices. ispMACH 4256V/B/C/Z, 4384V/B/C, 4512V/B/C, Logic Signal Connections: 176-Pin TQFP ispMACH 4256V/B/C/Z ispMACH 4384V/B/C ispMACH 4512V/B/C Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP 1 - NC - NC - NC - 2 - GND - GND - GND - 3 - TDI - TDI - TDI - 4 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - 5 0 C14 C^7 C14 C^7 C14 C^7 6 0 C12 C^6 C12 C^6 C12 C^6 7 0 C10 C^5 C10 C^5 C10 C^5 8 0 C8 C^4 C8 C^4 C8 C^4 9 0 C6 C^3 C6 C^3 C6 C^3 10 0 C4 C^2 C4 C^2 C4 C^2 11 0 C2 C^1 C2 C^1 C2 C^1 12 0 C0 C^0 C0 C^0 C0 C^0 13 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - 14 0 D14 D^7 E14 E^7 G14 G^7 15 0 D12 D^6 E12 E^6 G12 G^6 16 0 D10 D^5 E10 E^5 G10 G^5 17 0 D8 D^4 E8 E^4 G8 G^4 18 0 D6 D^3 E6 E^3 G6 G^3 61 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4256V/B/C/Z, 4384V/B/C, 4512V/B/C, Logic Signal Connections: 176-Pin TQFP (Cont.) ispMACH 4256V/B/C/Z ispMACH 4384V/B/C ispMACH 4512V/B/C Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP 19 0 D4 D^2 E4 E^2 G4 G^2 20 0 D2 D^1 E2 E^1 G2 G^1 21 0 D0 D^0 E0 E^0 G0 G^0 22 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - 23 0 E0 E^0 H0 H^0 J0 J^0 24 0 E2 E^1 H2 H^1 J2 J^1 25 0 E4 E^2 H4 H^2 J4 J^2 26 0 E6 E^3 H6 H^3 J6 J^3 27 0 E8 E^4 H8 H^4 J8 J^4 28 0 E10 E^5 H10 H^5 J10 J^5 29 0 E12 E^6 H12 H^6 J12 J^6 30 0 E14 E^7 H14 H^7 J14 J^7 31 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - 32 0 F0 F^0 J0 J^0 N0 N^0 33 0 F2 F^1 J2 J^1 N2 N^1 34 0 F4 F^2 J4 J^2 N4 N^2 35 0 F6 F^3 J6 J^3 N6 N^3 36 0 F8 F^4 J8 J^4 N8 N^4 37 0 F10 F^5 J10 J^5 N10 N^5 38 0 F12 F^6 J12 J^6 N12 N^6 39 0 F14 F^7 J14 J^7 N14 N^7 40 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - 41 - TCK - TCK - TCK - 42 - VCC - VCC - VCC - 43 - NC - NC - NC - 44 - NC - NC - NC - 45 - NC - NC - NC - 46 - GND - GND (Bank 0) - GND - 47 0 G14 G^7 K14 K^7 O14 O^7 48 0 G12 G^6 K12 K^6 O12 O^6 49 0 G10 G^5 K10 K^5 O10 O^5 50 0 G8 G^4 K8 K^4 O8 O^4 51 0 G6 G^3 K6 K^3 O6 O^3 52 0 G4 G^2 K4 K^2 O4 O^2 53 0 G2 G^1 K2 K^1 O2 O^1 54 0 G0 G^0 K0 K^0 O0 O^0 55 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - 56 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - 57 0 H14 H^7 L14 L^7 P14 P^7 58 0 H12 H^6 L12 L^6 P12 P^6 59 0 H10 H^5 L10 L^5 P10 P^5 62 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4256V/B/C/Z, 4384V/B/C, 4512V/B/C, Logic Signal Connections: 176-Pin TQFP (Cont.) ispMACH 4256V/B/C/Z ispMACH 4384V/B/C ispMACH 4512V/B/C Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP 60 0 H8 H^4 L8 L^4 P8 P^4 61 0 H6 H^3 L6 L^3 P6 P^3 62 0 H4 H^2 L4 L^2 P4 P^2 63 0 H2 H^1 L2 L^1 P2 P^1 64 0 H0 H^0 L0 L^0 P0 P^0 65 - GND - GND - GND - 66 0 CLK1/I - CLK1/I - CLK1/I - 67 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - 68 1 CLK2/I - CLK2/I - CLK2/I - 69 - VCC - VCC - VCC - 70 1 I0 I^0 M0 M^0 AX0 AX^0 71 1 I2 I^1 M2 M^1 AX2 AX^1 72 1 I4 I^2 M4 M^2 AX4 AX^2 73 1 I6 I^3 M6 M^3 AX6 AX^3 74 1 I8 I^4 M8 M^4 AX8 AX^4 75 1 I10 I^5 M10 M^5 AX10 AX^5 76 1 I12 I^6 M12 M^6 AX12 AX^6 77 1 I14 I^7 M14 M^7 AX14 AX^7 78 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - 79 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - 80 1 J0 J^0 N0 N^0 BX0 BX^0 81 1 J2 J^1 N2 N^1 BX2 BX^1 82 1 J4 J^2 N4 N^2 BX4 BX^2 83 1 J6 J^3 N6 N^3 BX6 BX^3 84 1 J8 J^4 N8 N^4 BX8 BX^4 85 1 J10 J^5 N10 N^5 BX10 BX^5 86 1 J12 J^6 N12 N^6 BX12 BX^6 87 1 J14 J^7 N14 N^7 BX14 BX^7 88 - VCC - VCC - VCC - 89 - NC - NC - NC - 90 - GND - GND - GND - 91 - TMS - TMS - TMS - 92 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - 93 1 K14 K^7 O14 O^7 CX14 CX^7 94 1 K12 K^6 O12 O^6 CX12 CX^6 95 1 K10 K^5 O10 O^5 CX10 CX^5 96 1 K8 K^4 O8 O^4 CX8 CX^4 97 1 K6 K^3 O6 O^3 CX6 CX^3 98 1 K4 K^2 O4 O^2 CX4 CX^2 99 1 K2 K^1 O2 O^1 CX2 CX^1 100 1 K0 K^0 O0 O^0 CX0 CX^0 63 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4256V/B/C/Z, 4384V/B/C, 4512V/B/C, Logic Signal Connections: 176-Pin TQFP (Cont.) ispMACH 4256V/B/C/Z ispMACH 4384V/B/C ispMACH 4512V/B/C Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP 101 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - 102 1 L14 L^7 AX14 AX^7 GX14 GX^7 103 1 L12 L^6 AX12 AX^6 GX12 GX^6 104 1 L10 L^5 AX10 AX^5 GX10 GX^5 105 1 L8 L^4 AX8 AX^4 GX8 GX^4 106 1 L6 L^3 AX6 AX^3 GX6 GX^3 107 1 L4 L^2 AX4 AX^2 GX4 GX^2 108 1 L2 L^1 AX2 AX^1 GX2 GX^1 109 1 L0 L^0 AX0 AX^0 GX0 GX^0 110 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - 111 1 M0 M^0 DX0 DX^0 JX0 JX^0 112 1 M2 M^1 DX2 DX^1 JX2 JX^1 113 1 M4 M^2 DX4 DX^2 JX4 JX^2 114 1 M6 M^3 DX6 DX^3 JX6 JX^3 115 1 M8 M^4 DX8 DX^4 JX8 JX^4 116 1 M10 M^5 DX10 DX^5 JX10 JX^5 117 1 M12 M^6 DX12 DX^6 JX12 JX^6 118 1 M14 M^7 DX14 DX^7 JX14 JX^7 119 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - 120 1 N0 N^0 FX0 FX^0 NX0 NX^0 121 1 N2 N^1 FX2 FX^1 NX2 NX^1 122 1 N4 N^2 FX4 FX^2 NX4 NX^2 123 1 N6 N^3 FX6 FX^3 NX6 NX^3 124 1 N8 N^4 FX8 FX^4 NX8 NX^4 125 1 N10 N^5 FX10 FX^5 NX10 NX^5 126 1 N12 N^6 FX12 FX^6 NX12 NX^6 127 1 N14 N^7 FX14 FX^7 NX14 NX^7 128 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - 129 - TDO - TDO - TDO - 130 - VCC - VCC - VCC - 131 - NC - NC - NC - 132 - NC - NC - NC - 133 - NC - NC - NC - 134 - GND - GND - GND - 135 1 O14 O^7 GX14 GX^7 OX14 OX^7 136 1 O12 O^6 GX12 GX^6 OX12 OX^6 137 1 O10 O^5 GX10 GX^5 OX10 OX^5 138 1 O8 O^4 GX8 GX^4 OX8 OX^4 139 1 O6 O^3 GX6 GX^3 OX6 OX^3 140 1 O4 O^2 GX4 GX^2 OX4 OX^2 141 1 O2 O^1 GX2 GX^1 OX2 OX^1 64 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4256V/B/C/Z, 4384V/B/C, 4512V/B/C, Logic Signal Connections: 176-Pin TQFP (Cont.) ispMACH 4256V/B/C/Z ispMACH 4384V/B/C ispMACH 4512V/B/C Pin Number Bank Number GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP 142 1 O0 O^0 GX0 GX^0 OX0 OX^0 143 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - 144 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - 145 1 P14 P^7 HX14 HX^7 PX14 PX^7 146 1 P12 P^6 HX12 HX^6 PX12 PX^6 147 1 P10 P^5 HX10 HX^5 PX10 PX^5 148 1 P8 P^4 HX8 HX^4 PX8 PX^4 149 1 P6 P^3 HX6 HX^3 PX6 PX^3 150 1 P4 P^2 HX4 HX^2 PX4 PX^2 151 1 P2/GOE1 P^1 HX2/GOE1 HX^1 PX2/GOE1 PX^1 152 1 P0 P^0 HX0 HX^0 PX0 PX^0 153 - GND - GND - GND - 154 1 CLK3/I - CLK3/I - CLK3/I - 155 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - 156 0 CLK0/I - CLK0/I - CLK0/I - 157 - VCC - VCC - VCC - 158 0 A0 A^0 A0 A^0 A0 A^0 159 0 A2/GOE0 A^1 A2/GOE0 A^1 A2//GOE0 A^1 160 0 A4 A^2 A4 A^2 A4 A^2 161 0 A6 A^3 A6 A^3 A6 A^3 162 0 A8 A^4 A8 A^4 A8 A^4 163 0 A10 A^5 A10 A^5 A10 A^5 164 0 A12 A^6 A12 A^6 A12 A^6 165 0 A14 A^7 A14 A^7 A14 A^7 166 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - 167 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - 168 0 B0 B^0 B0 B^0 B0 B^0 169 0 B2 B^1 B2 B^1 B2 B^1 170 0 B4 B^2 B4 B^2 B4 B^2 171 0 B6 B^3 B6 B^3 B6 B^3 172 0 B8 B^4 B8 B^4 B8 B^4 173 0 B10 B^5 B10 B^5 B10 B^5 174 0 B12 B^6 B12 B^6 B12 B^6 175 0 B14 B^7 B14 B^7 B14 B^7 176 - VCC - VCC - VCC - 65 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4256V/B/C, 4384V/B/C, 4512V/B/C Logic Signal Connections: 256-Ball ftBGA/fpBGA Ball Number I/O Bank ispMACH 4256V/B/C 128-I/O ispMACH 4256V/B/C 160-I/O ispMACH 4384V/B/C ispMACH 4512V/B/C GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP - - - - - - VCC - VCC - - - GND - GND - GND - GND - C3 - TDI - TDI - TDI - TDI - - 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - B1 0 C14 C^7 C14 C^9 C14 C^7 C14 C^7 F5 0 C12 C^6 C12 C^8 C12 C^6 C12 C^6 D3 0 C10 C^5 C10 C^7 C10 C^5 C10 C^5 C1 0 C8 C^4 C9 C^6 C8 C^4 C8 C^4 C2 0 C6 C^3 C8 C^5 C6 C^3 C6 C^3 E3 0 C4 C^2 C6 C^4 C4 C^2 C4 C^2 D2 0 C2 C^1 C4 C^3 C2 C^1 C2 C^1 F6 0 C0 C^0 C2 C^2 C0 C^0 C0 C^0 D1 0 NC - C1 C^1 F6 F^3 H0 H^0 E2 0 NC - C0 C^0 F4 F^2 H4 H^1 E4 0 NC - NC - D6 D^3 F4 F^2 G5 0 NC - NC - D4 D^2 F6 F^3 E1 0 NC - NC - NC - F8 F^4 - 0 - - VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - - 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - F2 0 NC - NC - NC - F10 F^5 F1 0 NC - NC - D2 D^1 F12 F^6 G1 0 NC - NC - D0 D^0 F14 F^7 G6 0 NC - D14 D^9 F2 F^1 H8 H^2 G4 0 NC - D12 D^8 F0 F^0 H12 H^3 H6 0 D14 D^7 D10 D^7 E14 E^7 G14 G^7 G3 0 D12 D^6 D9 D^6 E12 E^6 G12 G^6 H5 0 D10 D^5 D8 D^5 E10 E^5 G10 G^5 G2 0 D8 D^4 D6 D^4 E8 E^4 G8 G^4 H1 0 D6 D^3 D4 D^3 E6 E^3 G6 G^3 H2 0 D4 D^2 D2 D^2 E4 E^2 G4 G^2 H3 0 D2 D^1 D1 D^1 E2 E^1 G2 G^1 H4 0 D0 D^0 D0 D^0 E0 E^0 G0 G^0 - 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - - 0 - - GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - J4 0 E0 E^0 E0 E^0 H0 H^0 J0 J^0 J3 0 E2 E^1 E1 E^1 H2 H^1 J2 J^1 J2 0 E4 E^2 E2 E^2 H4 H^2 J4 J^2 J1 0 E6 E^3 E4 E^3 H6 H^3 J6 J^3 K1 0 E8 E^4 E6 E^4 H8 H^4 J8 J^4 J5 0 E10 E^5 E8 E^5 H10 H^5 J10 J^5 K2 0 E12 E^6 E9 E^6 H12 H^6 J12 J^6 66 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4256V/B/C, 4384V/B/C, 4512V/B/C Logic Signal Connections: 256-Ball ftBGA/fpBGA (Cont.) Ball Number I/O Bank ispMACH 4256V/B/C 128-I/O ispMACH 4256V/B/C 160-I/O ispMACH 4384V/B/C ispMACH 4512V/B/C GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP J6 0 E14 E^7 E10 E^7 H14 H^7 J14 J^7 K3 0 NC - E12 E^8 G0 G^0 I0 I^0 K4 0 NC - E14 E^9 G2 G^1 I4 I^1 L1 0 NC - NC - I14 I^7 K0 K^0 L2 0 NC - NC - I12 I^6 K2 K^1 M1 0 NC - NC - NC - K4 K^2 - 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - - 0 - - VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - M2 0 NC - NC - NC - K6 K^3 N1 0 NC - NC - I10 I^5 K8 K^4 M3 0 NC - NC - I8 I^4 K10 K^5 M4 0 NC - F0 F^0 G4 G^2 I8 I^2 N2 0 NC - F1 F^1 G6 G^3 I12 I^3 K5 0 F0 F^0 F2 F^2 J0 J^0 N0 N^0 P1 0 F2 F^1 F4 F^3 J2 J^1 N2 N^1 K6 0 F4 F^2 F6 F^4 J4 J^2 N4 N^2 N3 0 F6 F^3 F8 F^5 J6 J^3 N6 N^3 L5 0 F8 F^4 F9 F^6 J8 J^4 N8 N^4 P2 0 F10 F^5 F10 F^7 J10 J^5 N10 N^5 L6 0 F12 F^6 F12 F^8 J12 J^6 N12 N^6 R1 0 F14 F^7 F14 F^9 J14 J^7 N14 N^7 - 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - P3 - TCK - TCK - TCK - TCK - - - VCC - VCC - VCC - VCC - - - GND - GND - GND - GND - - 0 - - GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - T2 0 NC - G14 G^9 I6 I^3 K12 K^6 M5 0 NC - G12 G^8 I4 I^2 K14 K^7 N4 0 G14 G^7 G10 G^7 K14 K^7 O14 O^7 T3 0 G12 G^6 G9 G^6 K12 K^6 O12 O^6 R3 0 G10 G^5 G8 G^5 K10 K^5 O10 O^5 M6 0 G8 G^4 G6 G^4 K8 K^4 O8 O^4 P4 0 G6 G^3 G4 G^3 K6 K^3 O6 O^3 L7 0 G4 G^2 G2 G^2 K4 K^2 O4 O^2 N5 0 G2 G^1 G1 G^1 K2 K^1 O2 O^1 M7 0 G0 G^0 G0 G^0 K0 K^0 O0 O^0 P5 0 NC - NC - G8 G^4 M0 M^0 R4 0 NC - NC - G10 G^5 M4 M^1 T4 0 NC - NC - NC - L0 L^0 - 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - - 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - 67 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4256V/B/C, 4384V/B/C, 4512V/B/C Logic Signal Connections: 256-Ball ftBGA/fpBGA (Cont.) Ball Number I/O Bank ispMACH 4256V/B/C 128-I/O ispMACH 4256V/B/C 160-I/O ispMACH 4384V/B/C ispMACH 4512V/B/C GLB/MC/Pad GLB/MC/Pad ORP GLB/MC/Pad GLB/MC/Pad ORP ORP ORP R5 0 NC - NC - NC - L4 L^1 T5 0 NC - NC - I2 I^1 L8 L^2 R6 0 NC - NC - I0 I^0 L12 L^3 T6 0 NC - H14 H^9 G12 G^6 M8 M^2 N7 0 NC - H12 H^8 G14 G^7 M12 M^3 P7 0 H14 H^7 H10 H^7 L14 L^7 P14 P^7 R7 0 H12 H^6 H9 H^6 L12 L^6 P12 P^6 L8 0 H10 H^5 H8 H^5 L10 L^5 P10 P^5 T7 0 H8 H^4 H6 H^4 L8 L^4 P8 P^4 M8 0 H6 H^3 H4 H^3 L6 L^3 P6 P^3 N8 0 H4 H^2 H2 H^2 L4 L^2 P4 P^2 R8 0 H2 H^1 H1 H^1 L2 L^1 P2 P^1 P8 0 H0 H^0 H0 H^0 L0 L^0 P0 P^0 - - GND - GND - GND - GND - T8 0 CLK1/I - CLK1/I - CLK1/I - CLK1/I - - 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - N9 1 CLK2/I - CLK2/I - CLK2/I - CLK2/I - - - VCC - VCC - VCC - VCC - P9 1 I0 I^0 I0 I^0 M0 M^0 AX0 AX^0 R9 1 I2 I^1 I1 I^1 M2 M^1 AX2 AX^1 T9 1 I4 I^2 I2 I^2 M4 M^2 AX4 AX^2 T10 1 I6 I^3 I4 I^3 M6 M^3 AX6 AX^3 R10 1 I8 I^4 I6 I^4 M8 M^4 AX8 AX^4 M9 1 I10 I^5 I8 I^5 M10 M^5 AX10 AX^5 P10 1 I12 I^6 I9 I^6 M12 M^6 AX12 AX^6 L9 1 I14 I^7 I10 I^7 M14 M^7 AX14 AX^7 N10 1 NC - I12 I^8 BX14 BX^7 DX0 DX^0 T11 1 NC - I14 I^9 BX12 BX^6 DX4 DX^1 R11 1 NC - NC - P0 P^0 EX0 EX^0 T12 1 NC - NC - P2 P^1 EX4 EX^1 N12 1 NC - NC - NC - EX8 EX^2 - 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - - 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - R12 1 NC - NC - NC - EX12 EX^3 T13 1 NC - J0 J^0 BX10 BX^5 DX8 DX^2 P12 1 NC - J1 J^1 BX8 BX^4 DX12 DX^3 M10 1 J0 J^0 J2 J^2 N0 N^0 BX0 BX^0 R13 1 J2 J^1 J4 J^3 N2 N^1 BX2 BX^1 L10 1 J4 J^2 J6 J^4 N4 N^2 BX4 BX^2 T14 1 J6 J^3 J8 J^5 N6 N^3 BX6 BX^3 M11 1 J8 J^4 J9 J^6 N8 N^4 BX8 BX^4 68 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4256V/B/C, 4384V/B/C, 4512V/B/C Logic Signal Connections: 256-Ball ftBGA/fpBGA (Cont.) Ball Number I/O Bank ispMACH 4256V/B/C 128-I/O ispMACH 4256V/B/C 160-I/O ispMACH 4384V/B/C ispMACH 4512V/B/C GLB/MC/Pad GLB/MC/Pad GLB/MC/Pad GLB/MC/Pad ORP ORP ORP ORP R14 1 J10 J^5 J10 J^7 N10 N^5 BX10 BX^5 P13 1 J12 J^6 J12 J^8 N12 N^6 BX12 BX^6 N13 1 J14 J^7 J14 J^9 N14 N^7 BX14 BX^7 M12 1 NC - NC - P4 P^2 FX0 FX^0 T15 1 NC - NC - P6 P^3 FX2 FX^1 - - VCC - VCC - VCC - VCC - - - GND - GND - GND - GND - - 1 - - GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - P14 - TMS - TMS - TMS - TMS - - 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - L12 1 NC - NC - NC - FX4 FX^2 R16 1 NC - NC - P8 P^4 FX6 FX^3 N14 1 NC - NC - P10 P^5 FX8 FX^4 P15 1 K14 K^7 K14 K^9 O14 O^7 CX14 CX^7 L11 1 K12 K^6 K12 K^8 O12 O^6 CX12 CX^6 P16 1 K10 K^5 K10 K^7 O10 O^5 CX10 CX^5 K11 1 K8 K^4 K9 K^6 O8 O^4 CX8 CX^4 M14 1 K6 K^3 K8 K^5 O6 O^3 CX6 CX^3 K12 1 K4 K^2 K6 K^4 O4 O^2 CX4 CX^2 N15 1 K2 K^1 K4 K^3 O2 O^1 CX2 CX^1 N16 1 K0 K^0 K2 K^2 O0 O^0 CX0 CX^0 M15 1 NC - K1 K^1 BX6 BX^3 HX0 HX^0 M13 1 NC - K0 K^0 BX4 BX^2 HX4 HX^1 - 1 - - VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - - 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - M16 1 NC - NC - NC - FX10 FX^5 L15 1 NC - NC - P12 P^6 FX12 FX^6 L16 1 NC - NC - P14 P^7 FX14 FX^7 J11 1 NC - L14 L^9 BX2 BX^1 HX8 HX^2 K15 1 NC - L12 L^8 BX0 BX^0 HX12 HX^3 J12 1 L14 L^7 L10 L^7 AX14 AX^7 GX14 GX^7 K13 1 L12 L^6 L9 L^6 AX12 AX^6 GX12 GX^6 K14 1 L10 L^5 L8 L^5 AX10 AX^5 GX10 GX^5 K16 1 L8 L^4 L6 L^4 AX8 AX^4 GX8 GX^4 J16 1 L6 L^3 L4 L^3 AX6 AX^3 GX6 GX^3 J15 1 L4 L^2 L2 L^2 AX4 AX^2 GX4 GX^2 H16 1 L2 L^1 L1 L^1 AX2 AX^1 GX2 GX^1 J13 1 L0 L^0 L0 L^0 AX0 AX^0 GX0 GX^0 - 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - - 1 - - GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - J14 1 M0 M^0 M0 M^0 DX0 DX^0 JX0 JX^0 69 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4256V/B/C, 4384V/B/C, 4512V/B/C Logic Signal Connections: 256-Ball ftBGA/fpBGA (Cont.) ispMACH 4256V/B/C 128-I/O ispMACH 4256V/B/C 160-I/O Ball Number I/O Bank ispMACH 4384V/B/C ispMACH 4512V/B/C GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP H15 1 M2 M^1 M1 M^1 DX2 DX^1 JX2 JX^1 H14 1 M4 M^2 M2 M^2 DX4 DX^2 JX4 JX^2 H13 1 M6 M^3 M4 M^3 DX6 DX^3 JX6 JX^3 G16 1 M8 M^4 M6 M^4 DX8 DX^4 JX8 JX^4 H12 1 M10 M^5 M8 M^5 DX10 DX^5 JX10 JX^5 G15 1 M12 M^6 M9 M^6 DX12 DX^6 JX12 JX^6 H11 1 M14 M^7 M10 M^7 DX14 DX^7 JX14 JX^7 F16 1 NC - M12 M^8 CX0 CX^0 IX0 IX^0 G13 1 NC - M14 M^9 CX2 CX^1 IX4 IX^1 G14 1 NC - NC - EX14 EX^7 KX0 KX^0 F15 1 NC - NC - EX12 EX^6 KX2 KX^1 E16 1 NC - NC - NC - KX4 KX^2 - 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - - 1 - - VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - E15 1 NC - NC - NC - KX6 KX^3 G12 1 NC - NC - EX10 EX^5 KX8 KX^4 E13 1 NC - NC - EX8 EX^4 KX10 KX^5 D16 1 NC - N0 N^0 CX4 CX^2 IX8 IX^2 E14 1 NC - N1 N^1 CX6 CX^3 IX12 IX^3 G11 1 N0 N^0 N2 N^2 FX0 FX^0 NX0 NX^0 D15 1 N2 N^1 N4 N^3 FX2 FX^1 NX2 NX^1 F11 1 N4 N^2 N6 N^4 FX4 FX^2 NX4 NX^2 C16 1 N6 N^3 N8 N^5 FX6 FX^3 NX6 NX^3 F12 1 N8 N^4 N9 N^6 FX8 FX^4 NX8 NX^4 D14 1 N10 N^5 N10 N^7 FX10 FX^5 NX10 NX^5 C15 1 N12 N^6 N12 N^8 FX12 FX^6 NX12 NX^6 B16 1 N14 N^7 N14 N^9 FX14 FX^7 NX14 NX^7 - 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - C14 - TDO - TDO - TDO - TDO - - - VCC - VCC - VCC - VCC - - - GND - GND - GND - GND - - 1 - - GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - A15 1 NC - NC - EX6 EX^3 KX12 KX^6 B14 1 NC - NC - EX4 EX^2 KX14 KX^7 E12 1 O14 O^7 O14 O^9 GX14 GX^7 OX14 OX^7 A14 1 O12 O^6 O12 O^8 GX12 GX^6 OX12 OX^6 C13 1 O10 O^5 O10 O^7 GX10 GX^5 OX10 OX^5 D13 1 O8 O^4 O9 O^6 GX8 GX^4 OX8 OX^4 E11 1 O6 O^3 O8 O^5 GX6 GX^3 OX6 OX^3 B13 1 O4 O^2 O6 O^4 GX4 GX^2 OX4 OX^2 F10 1 O2 O^1 O4 O^3 GX2 GX^1 OX2 OX^1 70 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4256V/B/C, 4384V/B/C, 4512V/B/C Logic Signal Connections: 256-Ball ftBGA/fpBGA (Cont.) Ball Number I/O Bank ispMACH 4256V/B/C 128-I/O ispMACH 4256V/B/C 160-I/O ispMACH 4384V/B/C ispMACH 4512V/B/C GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP C12 1 O0 O^0 O2 O^2 GX0 GX^0 OX0 OX^0 E10 1 NC - O1 O^1 CX8 CX^4 MX0 MX^0 A13 1 NC - O0 O^0 CX10 CX^5 MX4 MX^1 D12 1 NC - NC - NC - LX0 LX^0 - 1 GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - GND (Bank 1) - - 1 VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - VCCO (Bank 1) - B12 1 NC - NC - NC - LX4 LX^1 A12 1 NC - NC - EX2 EX^1 LX8 LX^2 B11 1 NC - NC - EX0 EX^0 LX12 LX^3 A11 1 NC - P14 P^9 CX12 CX^6 MX8 MX^2 D10 1 NC - P12 P^8 CX14 CX^7 MX12 MX^3 C10 1 P14 P^7 P10 P^7 HX14 HX^7 PX14 PX^7 B10 1 P12 P^6 P9 P6 HX12 HX^6 PX12 PX^6 A10 1 P10 P^5 P8 P^5 HX10 HX^5 PX10 PX^5 A9 1 P8 P^4 P6 P^4 HX8 HX^4 PX8 PX^4 F9 1 P6 P^3 P4 P^3 HX6 HX^3 PX6 PX^3 B9 1 P4 P^2 P2 P^2 HX4 HX^2 PX4 PX^2 E9 1 P2/GOE1 P^1 P1/GOE1 P^1 HX2/GOE1 HX^1 PX2/GOE1 PX^1 C9 1 P0 P^0 P0 P^0 - - GND - GND HX0 HX^0 PX0 PX^0 GND - GND - D9 1 CLK3/I - CLK3/I - CLK3/I - CLK3/I - - 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - B8 0 CLK0/I - CLK0/I - CLK0/I - CLK0/I - - - VCC - VCC - VCC - VCC - D8 0 A0 A^0 A0 A^0 A0 A^0 A0 A^0 C8 0 A2/GOE0 A^1 A1/GOE0 A^1 A2/GOE0 A^1 A2/GOE0 A^1 A8 0 A4 A^2 A2 A^2 A4 A^2 A4 A^2 A7 0 A6 A^3 A4 A^3 A6 A^3 A6 A^3 B7 0 A8 A^4 A6 A^4 A8 A^4 A8 A^4 E8 0 A10 A^5 A8 A^5 A10 A^5 A10 A^5 D7 0 A12 A^6 A9 A^6 A12 A^6 A12 A^6 F8 0 A14 A^7 A10 A^7 A14 A^7 A14 A^7 C7 0 NC - A12 A^8 F14 F^7 D0 D^0 A6 0 NC - A14 A^9 F12 F^6 D4 D^1 B6 0 NC - NC - D14 D^7 E0 E^0 A5 0 NC - NC - D12 D^6 E4 E^1 B5 0 NC - NC - NC - E8 E^2 - 0 VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - VCCO (Bank 0) - - 0 GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - GND (Bank 0) - D5 0 NC - NC - NC - E12 E^3 A4 0 NC - B0 B^0 F10 F^5 D8 D^2 71 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4256V/B/C, 4384V/B/C, 4512V/B/C Logic Signal Connections: 256-Ball ftBGA/fpBGA (Cont.) ispMACH 4256V/B/C 128-I/O ispMACH 4256V/B/C 160-I/O ispMACH 4384V/B/C ispMACH 4512V/B/C ORP GLB/MC/Pad ORP GLB/MC/Pad ORP GLB/MC/Pad ORP Ball Number I/O Bank GLB/MC/Pad E7 0 NC - B1 B^1 F8 F^4 D12 D^3 A3 0 B0 B^0 B2 B^2 B0 B^0 B0 B^0 F7 0 B2 B^1 B4 B^3 B2 B^1 B2 B^1 B4 0 B4 B^2 B6 B^4 B4 B^2 B4 B^2 C5 0 B6 B^3 B8 B^5 B6 B^3 B6 B^3 A2 0 B8 B^4 B9 B^6 B8 B^4 B8 B^4 E6 0 B10 B^5 B10 B^7 B10 B^5 B10 B^5 B3 0 B12 B^6 B12 B^8 B12 B^6 B12 B^6 C4 0 B14 B^7 B14 B^9 B14 B^7 B14 B^7 D4 0 NC - NC - D10 D^5 F0 F^0 E5 0 NC - NC - D8 D^4 F2 F^1 - - VCC - VCC - VCC - VCC - - - - - - - GND - GND - - 0 - - - - GND (Bank 0) - GND (Bank 0) - Note: VCC, VCCO and GND are tied together to their respective common signal on the package substrate. See Power Supply and NC Connections table for VCC/ VCCO/GND pin definitions. 72 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Part Number Description LC XXXX X X - XX XX XXX X X XX Production Status Blank = Final production ES = Engineering Samples Device Family Device Number 4032 = 32 Macrocells 4064 = 64 Macrocells 4128 = 128 Macrocells 4256 = 256 Macrocells 4384 = 384 Macrocells 4512 = 512 Macrocells Operating Temperature Range C = Commercial I = Industrial E = Extended1 I/O Designator (if applicable) A = 128 I/Os B = 160 I/Os Power Z = Zero Power Blank = Low Power Pin/Ball Count 44 (1.0mm thickness) 48 (1.0mm thickness) 56 100 128 132 144 176 256 Package T = TQFP TN = Lead-free TQFP FT = ftBGA FTN= Lead-free ftBGA F = fpBGA2 FN = Lead-free fpBGA2 M = csBGA MN = Lead-free csBGA Supply Voltage V = 3.3V B = 2.5V C = 1.8V Speed 25 = 2.5ns 27 = 2.7ns 3 = 3.0ns 35 = 3.5ns 37 = 3.7ns 42 = 4.2ns 45 = 4.5ns 5 = 5.0ns 75 = 7.5ns 10 = 10.0ns 1. For automotive AEC-Q100 compliant devices, refer to the LA-ispMACH 4000V/Z Automotive Family Data Sheet (DS1017). 2. Use ftBGA package. fpBGA package devices have been discontinued via PCN#14A-07. ispMACH 4000 Family Speed Grade Offering -25 -27 -3 -35 -37 -42 -45 Com Com Com Com Com Com Com -5 Com -75 Ind Com Ind -10 Ext ispMACH 4032V/B/C 1 ispMACH 4064V/B/C 1 ispMACH 4128V/B/C 1 ispMACH 4256V/B/C ispMACH 4384V/B/C ispMACH 4512V/B/C ispMACH 4032ZC 1 ispMACH 4064ZC 1 ispMACH 4128ZC 1 ispMACH 4256ZC 1. 3.3V only. 73 Ind Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Ordering Information Note: ispMACH 4000 devices are all dual marked except the slowest commercial speed grade ispMACH 4000Z devices. For example, the commercial speed grade LC4128C-5T100C is also marked with the industrial grade -75I. The commercial grade is always one speed grade faster than the associated dual mark industrial grade. The slowest commercial speed grade ispMACH 4000Z devices are marked as commercial grade only. Conventional Packaging ispMACH 4000ZC (Zero Power, 1.8V) Commercial Devices Device LC4032ZC LC4064ZC LC4128ZC LC4256ZC Part Number Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4032ZC-35M56C 32 1.8 3.5 csBGA 56 32 C LC4032ZC-5M56C 32 1.8 5 csBGA 56 32 C LC4032ZC-75M56C 32 1.8 7.5 csBGA 56 32 C LC4032ZC-35T48C 32 1.8 3.5 TQFP 48 32 C LC4032ZC-5T48C 32 1.8 5 TQFP 48 32 C LC4032ZC-75T48C 32 1.8 7.5 TQFP 48 32 C LC4064ZC-37M132C 64 1.8 3.7 csBGA 132 64 C LC4064ZC-5M132C 64 1.8 5 csBGA 132 64 C LC4064ZC-75M132C 64 1.8 7.5 csBGA 132 64 C LC4064ZC-37T100C 64 1.8 3.7 TQFP 100 64 C LC4064ZC-5T100C 64 1.8 5 TQFP 100 64 C LC4064ZC-75T100C 64 1.8 7.5 TQFP 100 64 C LC4064ZC-37M56C 64 1.8 3.7 csBGA 56 32 C LC4064ZC-5M56C 64 1.8 5 csBGA 56 32 C LC4064ZC-75M56C 64 1.8 7.5 csBGA 56 32 C LC4064ZC-37T48C 64 1.8 3.7 TQFP 48 32 C LC4064ZC-5T48C 64 1.8 5 TQFP 48 32 C LC4064ZC-75T48C 64 1.8 7.5 TQFP 48 32 C LC4128ZC-42M132C 128 1.8 4.2 csBGA 132 96 C LC4128ZC-75M132C 128 1.8 7.5 csBGA 132 96 C LC4128ZC-42T100C 128 1.8 4.2 TQFP 100 64 C LC4128ZC-75T100C 128 1.8 7.5 TQFP 100 64 C LC4256ZC-45T176C 256 1.8 4.5 TQFP 176 128 C LC4256ZC-75T176C 256 1.8 7.5 TQFP 176 128 C LC4256ZC-45M132C 256 1.8 4.5 csBGA 132 96 C LC4256ZC-75M132C 256 1.8 7.5 csBGA 132 96 C LC4256ZC-45T100C 256 1.8 4.5 TQFP 100 64 C LC4256ZC-75T100C 256 1.8 7.5 TQFP 100 64 C Pin/Ball Count I/O Grade ispMACH 4000ZC (1.8V, Zero Power) Industrial Devices Device LC4032ZC Part Number Macrocells Voltage LC4032ZC-5M56I 32 1.8 5 csBGA 56 32 I LC4032ZC-75M56I 32 1.8 7.5 csBGA 56 32 I LC4032ZC-5T48I 32 1.8 5 TQFP 48 32 I LC4032ZC-75T48I 32 1.8 7.5 TQFP 48 32 I 74 tPD Package Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000ZC (1.8V, Zero Power) Industrial Devices (Cont.) Device LC4064ZC LC4128ZC LC4256ZC Part Number Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4064ZC-5M132I 64 1.8 5 csBGA 132 64 I LC4064ZC-75M132I 64 1.8 7.5 csBGA 132 64 I LC4064ZC-5T100I 64 1.8 5 TQFP 100 64 I LC4064ZC-75T100I 64 1.8 7.5 TQFP 100 64 I LC4064ZC-5M56I 64 1.8 5 csBGA 56 34 I LC4064ZC-75M56I 64 1.8 7.5 csBGA 56 34 I LC4064ZC-5T48I 64 1.8 5 TQFP 48 32 I LC4064ZC-75T48I 64 1.8 7.5 TQFP 48 32 I LC4128ZC-75M132I 128 1.8 7.5 csBGA 132 96 I LC4128ZC-75T100I 128 1.8 7.5 TQFP 100 64 I LC4256ZC-75T176I 256 1.8 7.5 TQFP 176 128 I LC4256ZC-75M132I 256 1.8 7.5 csBGA 132 96 I LC4256ZC-75T100I 256 1.8 7.5 TQFP 100 64 I ispMACH 4000ZC (1.8V, Zero Power) Extended Temperature Devices Family Part Number LC4032ZC LC4032ZC-75T48E LC4064ZC LC4128ZC LC4256ZC Macrocells Voltage tPD Package Pin/Ball Count I/O Grade 32 1.8 7.5 TQFP 48 32 E LC4064ZC-75T100E 64 1.8 7.5 TQFP 100 64 E LC4064ZC-75T48E 64 1.8 7.5 TQFP 48 32 E LC4128ZC-75T100E 128 1.8 7.5 TQFP 100 64 E LC4256ZC-75T176E 256 1.8 7.5 TQFP 176 128 E LC4256ZC-75T100E 256 1.8 7.5 TQFP 100 64 E ispMACH 4000C (1.8V) Commercial Devices Device LC4032C LC4064C Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4032C-25T48C Part Number 32 1.8 2.5 TQFP 48 32 C LC4032C-5T48C 32 1.8 5 TQFP 48 32 C LC4032C-75T48C 32 1.8 7.5 TQFP 48 32 C LC4032C-25T44C 32 1.8 2.5 TQFP 44 30 C LC4032C-5T44C 32 1.8 5 TQFP 44 30 C LC4032C-75T44C 32 1.8 7.5 TQFP 44 30 C LC4064C-25T100C 64 1.8 2.5 TQFP 100 64 C LC4064C-5T100C 64 1.8 5 TQFP 100 64 C LC4064C-75T100C 64 1.8 7.5 TQFP 100 64 C LC4064C-25T48C 64 1.8 2.5 TQFP 48 32 C LC4064C-5T48C 64 1.8 5 TQFP 48 32 C LC4064C-75T48C 64 1.8 7.5 TQFP 48 32 C LC4064C-25T44C 64 1.8 2.5 TQFP 44 30 C LC4064C-5T44C 64 1.8 5 TQFP 44 30 C LC4064C-75T44C 64 1.8 7.5 TQFP 44 30 C 75 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000C (1.8V) Commercial Devices (Cont.) Device LC4128C LC4256C Part Number Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4128C-27T128C 128 1.8 2.7 TQFP 128 92 C LC4128C-5T128C 128 1.8 5 TQFP 128 92 C LC4128C-75T128C 128 1.8 7.5 TQFP 128 92 C LC4128C-27T100C 128 1.8 2.7 TQFP 100 64 C LC4128C-5T100C 128 1.8 5 TQFP 100 64 C LC4128C-75T100C 128 1.8 7.5 TQFP 100 64 C LC4256C-3FT256AC 256 1.8 3 ftBGA 256 128 C LC4256C-5FT256AC 256 1.8 5 ftBGA 256 128 C LC4256C-75FT256AC 256 1.8 7.5 ftBGA 256 128 C LC4256C-3FT256BC 256 1.8 3 ftBGA 256 160 C LC4256C-5FT256BC 256 1.8 5 ftBGA 256 160 C LC4256C-75FT256BC 256 1.8 7.5 ftBGA 256 160 C 1 LC4256C-3F256AC 256 1.8 3 fpBGA 256 128 C LC4256C-5F256AC1 256 1.8 5 fpBGA 256 128 C LC4256C-75F256AC1 256 1.8 7.5 fpBGA 256 128 C 1 LC4256C-3F256BC 256 1.8 3 fpBGA 256 160 C LC4256C-5F256BC1 256 1.8 5 fpBGA 256 160 C LC4256C-75F256BC1 256 1.8 7.5 fpBGA 256 160 C LC4256C-3T176C 256 1.8 3 TQFP 176 128 C LC4256C-5T176C 256 1.8 5 TQFP 176 128 C LC4256C-75T176C 256 1.8 7.5 TQFP 176 128 C LC4256C-3T100C 256 1.8 3 TQFP 100 64 C LC4256C-5T100C 256 1.8 5 TQFP 100 64 C LC4256C-75T100C 256 1.8 7.5 TQFP 100 64 C LC4384C-35FT256C 384 1.8 3.5 ftBGA 256 192 C LC4384C-5FT256C 384 1.8 5 ftBGA 256 192 C LC4384C-75FT256C 384 1.8 7.5 ftBGA 256 192 C 1 LC4384C LC4384C-35F256C 384 1.8 3.5 fpBGA 256 192 C LC4384C-5F256C1 384 1.8 5 fpBGA 256 192 C LC4384C-75F256C1 384 1.8 7.5 fpBGA 256 192 C LC4384C-35T176C 384 1.8 3.5 TQFP 176 128 C LC4384C-5T176C 384 1.8 5 TQFP 176 128 C LC4384C-75T176C 384 1.8 7.5 TQFP 176 128 C LC4512C-35FT256C 512 1.8 3.5 ftBGA 256 208 C LC4512C-5FT256C 512 1.8 5 ftBGA 256 208 C LC4512C-75FT256C 512 1.8 7.5 ftBGA 256 208 C LC4512C-35F256C 512 1.8 3.5 fpBGA 256 208 C LC4512C-5F256C1 512 1.8 5 fpBGA 256 208 C LC4512C-75F256C1 512 1.8 7.5 fpBGA 256 208 C 1 LC4512C LC4512C-35T176C 512 1.8 3.5 TQFP 176 128 C LC4512C-5T176C 512 1.8 5 TQFP 176 128 C LC4512C-75T176C 512 1.8 7.5 TQFP 176 128 C 1. Use ftBGA package. fpBGA package devices have been discontinued via PCN#14A-07. 76 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000C (1.8V) Industrial Devices Family LC4032C LC4064C LC4128C LC4256C Part Number Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4032C-5T48I 32 LC4032C-75T48I 32 1.8 5 1.8 7.5 TQFP 48 32 I TQFP 48 32 LC4032C-10T48I 32 1.8 I 10 TQFP 48 32 I LC4032C-5T44I 32 LC4032C-75T44I 32 1.8 5 TQFP 44 30 I 1.8 7.5 TQFP 44 30 I LC4032C-10T44I LC4064C-5T100I 32 1.8 10 TQFP 44 30 I 64 1.8 5 TQFP 100 64 I LC4064C-75T100I 64 1.8 7.5 TQFP 100 64 I LC4064C-10T100I 64 1.8 10 TQFP 100 64 I LC4064C-5T48I 64 1.8 5 TQFP 48 32 I LC4064C-75T48I 64 1.8 7.5 TQFP 48 32 I LC4064C-10T48I 64 1.8 10 TQFP 48 32 I LC4064C-5T44I 64 1.8 5 TQFP 44 30 I LC4064C-75T44I 64 1.8 7.5 TQFP 44 30 I LC4064C-10T44I 64 1.8 10 TQFP 44 30 I LC4128C-5T128I 128 1.8 5 TQFP 128 92 I LC4128C-75T128I 128 1.8 7.5 TQFP 128 92 I LC4128C-10T128I 128 1.8 10 TQFP 128 92 I LC4128C-5T100I 128 1.8 5 TQFP 100 64 I LC4128C-75T100I 128 1.8 7.5 TQFP 100 64 I LC4128C-10T100I 128 1.8 10 TQFP 100 64 I LC4256C-5FT256AI 256 1.8 5 ftBGA 256 128 I LC4256C-75FT256AI 256 1.8 7.5 ftBGA 256 128 I LC4256C-10FT256AI 256 1.8 10 ftBGA 256 128 I LC4256C-5FT256BI 256 1.8 5 ftBGA 256 160 I LC4256C-75FT256BI 256 1.8 7.5 ftBGA 256 160 I LC4256C-10FT256BI 256 1.8 10 ftBGA 256 160 I LC4256C-5F256AI1 256 1.8 5 fpBGA 256 128 I LC4256C-75F256AI1 256 1.8 7.5 fpBGA 256 128 I LC4256C-10F256AI1 256 1.8 10 fpBGA 256 128 I LC4256C-5F256BI1 256 1.8 5 fpBGA 256 160 I LC4256C-75F256BI1 256 1.8 7.5 fpBGA 256 160 I LC4256C-10F256BI1 256 1.8 10 fpBGA 256 160 I LC4256C-5T176I 256 1.8 5 TQFP 176 128 I LC4256C-75T176I 256 1.8 7.5 TQFP 176 128 I LC4256C-10T176I 256 1.8 10 TQFP 176 128 I LC4256C-5T100I 256 1.8 5 TQFP 100 64 I LC4256C-75T100I 256 1.8 7.5 TQFP 100 64 I LC4256C-10T100I 256 1.8 10 TQFP 100 64 I 77 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000C (1.8V) Industrial Devices (Cont.) Family Part Number tPD Package Pin/Ball Count I/O Grade 384 1.8 5 ftBGA 256 192 I LC4384C-75FT256I 384 1.8 7.5 ftBGA 256 192 I LC4384C-10FT256I 384 1.8 10 ftBGA 256 192 I 1 384 1.8 5 fpBGA 256 192 I LC4384C-75F256I1 384 1.8 7.5 fpBGA 256 192 I LC4384C-10F256I1 384 1.8 10 fpBGA 256 192 I LC4384C-5T176I 384 1.8 5 TQFP 176 128 I LC4384C-75T176I 384 1.8 7.5 TQFP 176 128 I LC4384C-10T176I 384 1.8 10 TQFP 176 128 I LC4512C-5FT256I 512 1.8 5 ftBGA 256 208 I LC4512C-75FT256I 512 1.8 7.5 ftBGA 256 208 I LC4512C-10FT256I 512 1.8 10 ftBGA 256 208 I 512 1.8 5 fpBGA 256 208 I LC4512C-5F256I LC4512C Voltage LC4384C-5FT256I LC4384C-5F256I LC4384C Macrocells 1 LC4512C-75F256I1 512 1.8 7.5 fpBGA 256 208 I LC4512C-10F256I1 512 1.8 10 fpBGA 256 208 I LC4512C-5T176I 512 1.8 5 TQFP 176 128 I LC4512C-75T176I 512 1.8 7.5 TQFP 176 128 I LC4512C-10T176I 512 1.8 10 TQFP 176 128 I 1. Use ftBGA package. fpBGA package devices have been discontinued via PCN#14A-07. ispMACH 4000B (2.5V) Commercial Devices Device LC4032B LC4064B LC4128B Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4032B-25T48C Part Number 32 2.5 2.5 TQFP 48 32 C LC4032B-5T48C 32 2.5 5 TQFP 48 32 C LC4032B-75T48C 32 2.5 7.5 TQFP 48 32 C LC4032B-25T44C 32 2.5 2.5 TQFP 44 30 C LC4032B-5T44C 32 2.5 5 TQFP 44 30 C LC4032B-75T44C 32 2.5 7.5 TQFP 44 30 C LC4064B-25T100C 64 2.5 2.5 TQFP 100 64 C LC4064B-5T100C 64 2.5 5 TQFP 100 64 C LC4064B-75T100C 64 2.5 7.5 TQFP 100 64 C LC4064B-25T48C 64 2.5 2.5 TQFP 48 32 C LC4064B-5T48C 64 2.5 5 TQFP 48 32 C LC4064B-75T48C 64 2.5 7.5 TQFP 48 32 C LC4064B-25T44C 64 2.5 2.5 TQFP 44 30 C LC4064B-5T44C 64 2.5 5 TQFP 44 30 C LC4064B-75T44C 64 2.5 7.5 TQFP 44 30 C LC4128B-27T128C 128 2.5 2.7 TQFP 128 92 C LC4128B-5T128C 128 2.5 5 TQFP 128 92 C LC4128B-75T128C 128 2.5 7.5 TQFP 128 92 C LC4128B-27T100C 128 2.5 2.7 TQFP 100 64 C LC4128B-5T100C 128 2.5 5 TQFP 100 64 C LC4128B-75T100C 128 2.5 7.5 TQFP 100 64 C 78 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000B (2.5V) Commercial Devices (Cont.) Device Part Number Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4256B-3FT256AC 256 2.5 3 ftBGA 256 128 C LC4256B-5FT256AC 256 2.5 5 ftBGA 256 128 C LC4256B-75FT256AC 256 2.5 7.5 ftBGA 256 128 C LC4256B-3FT256BC 256 2.5 3 ftBGA 256 160 C LC4256B-5FT256BC 256 2.5 5 ftBGA 256 160 C LC4256B-75FT256BC 256 2.5 7.5 ftBGA 256 160 C 1 256 2.5 3 fpBGA 256 128 C LC4256B-5F256AC1 256 2.5 5 fpBGA 256 128 C LC4256B-75F256AC1 256 2.5 7.5 fpBGA 256 128 C LC4256B-3F256BC1 256 2.5 3 fpBGA 256 160 C LC4256B-5F256BC1 256 2.5 5 fpBGA 256 160 C LC4256B-75F256BC1 256 2.5 7.5 fpBGA 256 160 C LC4256B-3T176C 256 2.5 3 TQFP 176 128 C LC4256B-5T176C 256 2.5 5 TQFP 176 128 C LC4256B-75T176C 256 2.5 7.5 TQFP 176 128 C LC4256B-3T100C 256 2.5 3 TQFP 100 64 C LC4256B-5T100C 256 2.5 5 TQFP 100 64 C LC4256B-75T100C 256 2.5 7.5 TQFP 100 64 C LC4256B-3F256AC LC4256B LC4384B-35FT256C 384 2.5 3.5 ftBGA 256 192 C LC4384B-5FT256C 384 2.5 5 ftBGA 256 192 C LC4384B-75FT256C 384 2.5 7.5 ftBGA 256 192 C C LC4384B-35F256C LC4384B LC4512B 1 384 2.5 3.5 fpBGA 256 192 LC4384B-5F256C1 384 2.5 5 fpBGA 256 192 C LC4384B-75F256C1 384 2.5 7.5 fpBGA 256 192 C LC4384B-35T176C 384 2.5 3.5 TQFP 176 128 C LC4384B-5T176C 384 2.5 5 TQFP 176 128 C LC4384B-75T176C 384 2.5 7.5 TQFP 176 128 C C LC4512B-35FT256C 512 2.5 3.5 ftBGA 256 208 LC4512B-5FT256C 512 2.5 5 ftBGA 256 208 C LC4512B-75FT256C 512 2.5 7.5 ftBGA 256 208 C LC4512B-35F256C1 512 2.5 3.5 fpBGA 256 208 C LC4512B-5F256C1 512 2.5 5 fpBGA 256 208 C LC4512B-75F256C1 512 2.5 7.5 fpBGA 256 208 C C LC4512B-35T176C 512 2.5 3.5 TQFP 176 128 LC4512B-5T176C 512 2.5 5 TQFP 176 128 C LC4512B-75T176C 512 2.5 7.5 TQFP 176 128 C 1. Use ftBGA package. fpBGA package devices have been discontinued via PCN#14A-07. 79 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000B (2.5V) Industrial Devices Family LC4032B LC4064B LC4128B LC4256B Part Number Macrocells Voltage tPD Package Pin/Ball Count I/O LC4032B-5T48I 32 2.5 LC4032B-75T48I 32 2.5 LC4032B-10T48I 32 2.5 10 LC4032B-5T44I 32 2.5 LC4032B-75T44I 32 2.5 Grade 5 TQFP 48 32 I 7.5 TQFP 48 32 I TQFP 48 32 I 5 TQFP 44 30 I 7.5 TQFP 44 30 I LC4032B-10T44I 32 2.5 10 TQFP 44 30 I LC4064B-5T100I 64 2.5 5 TQFP 100 64 I LC4064B-75T100I 64 2.5 7.5 TQFP 100 64 I LC4064B-10T100I 64 2.5 10 TQFP 100 64 I LC4064B-5T48I 64 2.5 5 TQFP 48 32 I LC4064B-75T48I 64 2.5 7.5 TQFP 48 32 I LC4064B-10T48I 64 2.5 10 TQFP 48 32 I LC4064B-5T44I 64 2.5 5 TQFP 44 30 I LC4064B-75T44I 64 2.5 7.5 TQFP 44 30 I LC4064B-10T44I 64 2.5 10 TQFP 44 30 I LC4128B-5T128I 128 2.5 5 TQFP 128 92 I LC4128B-75T128I 128 2.5 7.5 TQFP 128 92 I LC4128B-10T128I 128 2.5 10 TQFP 128 92 I LC4128B-5T100I 128 2.5 5 TQFP 100 64 I LC4128B-75T100I 128 2.5 7.5 TQFP 100 64 I LC4128B-10T100I 128 2.5 10 TQFP 100 64 I LC4256B-5FT256AI 256 2.5 5 ftBGA 256 128 I LC4256B-75FT256AI 256 2.5 7.5 ftBGA 256 128 I LC4256B-10FT256AI 256 2.5 10 ftBGA 256 128 I LC4256B-5FT256BI 256 2.5 5 ftBGA 256 160 I LC4256B-75FT256BI 256 2.5 7.5 ftBGA 256 160 I LC4256B-10FT256BI 256 2.5 10 ftBGA 256 160 I LC4256B-5F256AI1 256 2.5 5 fpBGA 256 128 I LC4256B-75F256AI1 256 2.5 7.5 fpBGA 256 128 I 1 10 fpBGA 256 128 I LC4256B-10F256AI 256 2.5 LC4256B-5F256BI1 256 2.5 5 fpBGA 256 160 I LC4256B-75F256BI1 256 2.5 7.5 fpBGA 256 160 I 1 LC4256B-10F256BI 256 2.5 10 fpBGA 256 160 I LC4256B-5T176I 256 2.5 5 TQFP 176 128 I LC4256B-75T176I 256 2.5 7.5 TQFP 176 128 I LC4256B-10T176I 256 2.5 10 TQFP 176 128 I LC4256B-5T100I 256 2.5 5 TQFP 100 64 I LC4256B-75T100I 256 2.5 7.5 TQFP 100 64 I LC4256B-10T100I 256 2.5 10 TQFP 100 64 I 80 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000B (2.5V) Industrial Devices (Cont.) Family Part Number Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4384B-5FT256I 384 LC4384B-75FT256I 384 2.5 5 ftBGA 256 192 I 2.5 7.5 ftBGA 256 192 I LC4384B-10FT256I 384 2.5 10 ftBGA 256 192 I LC4384B-5F256I 384 2.5 5 fpBGA 256 192 I LC4384B-75F256I1 384 2.5 7.5 fpBGA 256 192 I LC4384B-10F256I1 384 2.5 10 fpBGA 256 192 I LC4384B-5T176I 384 2.5 5 TQFP 176 128 I LC4384B-75T176I 384 2.5 7.5 TQFP 176 128 I LC4384B-10T176I 384 2.5 10 TQFP 176 128 I LC4512B-5FT256I 512 2.5 5 ftBGA 256 208 I LC4512B-75FT256I 512 2.5 7.5 ftBGA 256 208 I LC4512B-10FT256I 512 2.5 10 ftBGA 256 208 I LC4512B-5F256I 512 2.5 5 fpBGA 256 208 I LC4512B-75F256I1 512 2.5 7.5 fpBGA 256 208 I LC4512B-10F256I1 512 2.5 10 fpBGA 256 208 I LC4512B-5T176I 512 2.5 5 TQFP 176 128 I LC4512B-75T176I 512 2.5 7.5 TQFP 176 128 I LC4512B-10T176I 512 2.5 10 TQFP 176 128 I Package Pin/Ball Count I/O Grade 1 LC4384B 1 LC4512B 1. Use ftBGA package. fpBGA package devices have been discontinued via PCN#14A-07. ispMACH 4000V (3.3V) Commercial Devices Device LC4032V LC4064V Part Number Macrocells Voltage tPD LC4032V-25T48C 32 3.3 2.5 TQFP 48 32 C LC4032V-5T48C 32 3.3 5 TQFP 48 32 C LC4032V-75T48C 32 3.3 7.5 TQFP 48 32 C LC4032V-25T44C 32 3.3 2.5 TQFP 44 30 C LC4032V-5T44C 32 3.3 5 TQFP 44 30 C LC4032V-75T44C 32 3.3 7.5 TQFP 44 30 C LC4064V-25T100C 64 3.3 2.5 TQFP 100 64 C LC4064V-5T100C 64 3.3 5 TQFP 100 64 C LC4064V-75T100C 64 3.3 7.5 TQFP 100 64 C LC4064V-25T48C 64 3.3 2.5 TQFP 48 32 C LC4064V-5T48C 64 3.3 5 TQFP 48 32 C LC4064V-75T48C 64 3.3 7.5 TQFP 48 32 C LC4064V-25T44C 64 3.3 2.5 TQFP 44 30 C LC4064V-5T44C 64 3.3 5 TQFP 44 30 C LC4064V-75T44C 64 3.3 7.5 TQFP 44 30 C 81 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V (3.3V) Commercial Devices (Cont.) Device LC4128V LC4256V Part Number Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4128V-27T144C 128 3.3 2.7 TQFP 144 96 C LC4128V-5T144C 128 3.3 5 TQFP 144 96 C LC4128V-75T144C 128 3.3 7.5 TQFP 144 96 C LC4128V-27T128C 128 3.3 2.7 TQFP 128 92 C LC4128V-5T128C 128 3.3 5 TQFP 128 92 C LC4128V-75T128C 128 3.3 7.5 TQFP 128 92 C LC4128V-27T100C 128 3.3 2.7 TQFP 100 64 C LC4128V-5T100C 128 3.3 5 TQFP 100 64 C LC4128V-75T100C 128 3.3 7.5 TQFP 100 64 C LC4256V-3FT256AC 256 3.3 3 ftBGA 256 128 C LC4256V-5FT256AC 256 3.3 5 ftBGA 256 128 C LC4256V-75FT256AC 256 3.3 7.5 ftBGA 256 128 C LC4256V-3FT256BC 256 3.3 3 ftBGA 256 160 C LC4256V-5FT256BC 256 3.3 5 ftBGA 256 160 C LC4256V-75FT256BC 256 3.3 7.5 ftBGA 256 160 C 1 LC4256V-3F256AC 256 3.3 3 fpBGA 256 128 C LC4256V-5F256AC1 256 3.3 5 fpBGA 256 128 C LC4256V-75F256AC1 256 3.3 7.5 fpBGA 256 128 C LC4256V-3F256BC1 256 3.3 3 fpBGA 256 160 C LC4256V-5F256BC1 256 3.3 5 fpBGA 256 160 C LC4256V-75F256BC1 256 3.3 7.5 fpBGA 256 160 C LC4256V-3T176C 256 3.3 3 TQFP 176 128 C LC4256V-5T176C 256 3.3 5 TQFP 176 128 C LC4256V-75T176C 256 3.3 7.5 TQFP 176 128 C LC4256V-3T144C 256 3.3 3 TQFP 144 96 C LC4256V-5T144C 256 3.3 5 TQFP 144 96 C LC4256V-75T144C 256 3.3 7.5 TQFP 144 96 C LC4256V-3T100C 256 3.3 3 TQFP 100 64 C LC4256V-5T100C 256 3.3 5 TQFP 100 64 C LC4256V-75T100C 256 3.3 7.5 TQFP 100 64 C LC4384V-35FT256C 384 3.3 3.5 ftBGA 256 192 C LC4384V-5FT256C 384 3.3 5 ftBGA 256 192 C LC4384V-75FT256C 384 3.3 7.5 ftBGA 256 192 C C LC4384V-35F256C LC4384V 1 384 3.3 3.5 fpBGA 256 192 LC4384V-5F256C1 384 3.3 5 fpBGA 256 192 C LC4384V-75F256C1 384 3.3 7.5 fpBGA 256 192 C LC4384V-35T176C 384 3.3 3.5 TQFP 176 128 C LC4384V-5T176C 384 3.3 5 TQFP 176 128 C LC4384V-75T176C 384 3.3 7.5 TQFP 176 128 C 82 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V (3.3V) Commercial Devices (Cont.) Device Part Number Voltage tPD Package Pin/Ball Count I/O Grade LC4512V-35FT256C 512 3.3 3.5 ftBGA 256 208 C LC4512V-5FT256C 512 3.3 5 ftBGA 256 208 C LC4512V-75FT256C 512 3.3 7.5 ftBGA 256 208 C C LC4512V-35F256C LC4512V Macrocells 1 512 3.3 3.5 fpBGA 256 208 LC4512V-5F256C1 512 3.3 5 fpBGA 256 208 C LC4512V-75F256C1 512 3.3 7.5 fpBGA 256 208 C LC4512V-35T176C 512 3.3 3.5 TQFP 176 128 C LC4512V-5T176C 512 3.3 5 TQFP 176 128 C LC4512V-75T176C 512 3.3 7.5 TQFP 176 128 C 1. Use ftBGA package. fpBGA package devices have been discontinued via PCN#14A-07. ispMACH 4000V (3.3V) Industrial Devices Family LC4032V LC4064V LC4128V Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4032V-5T48I Part Number 32 3.3 5 TQFP 48 32 I LC4032V-75T48I 32 3.3 7.5 TQFP 48 32 I LC4032V-10T48I 32 3.3 10 TQFP 48 32 I LC4032V-5T44I 32 3.3 5 TQFP 44 30 I LC4032V-75T44I 32 3.3 7.5 TQFP 44 30 I LC4032V-10T44I 32 3.3 10 TQFP 44 30 I LC4064V-5T100I 64 3.3 5 TQFP 100 64 I LC4064V-75T100I 64 3.3 7.5 TQFP 100 64 I LC4064V-10T100I 64 3.3 10 TQFP 100 64 I LC4064V-5T48I 64 3.3 5 TQFP 48 32 I LC4064V-75T48I 64 3.3 7.5 TQFP 48 32 I LC4064V-10T48I 64 3.3 10 TQFP 48 32 I LC4064V-5T44I 64 3.3 5 TQFP 44 30 I LC4064V-75T44I 64 3.3 7.5 TQFP 44 30 I LC4064V-10T44I 64 3.3 10 TQFP 44 30 I LC4128V-5T144I 128 3.3 5 TQFP 144 96 I LC4128V-75T144I 128 3.3 7.5 TQFP 144 96 I LC4128V-10T144I 128 3.3 10 TQFP 144 96 I LC4128V-5T128I 128 3.3 5 TQFP 128 92 I LC4128V-75T128I 128 3.3 7.5 TQFP 128 92 I LC4128V-10T128I 128 3.3 10 TQFP 128 92 I LC4128V-5T100I 128 3.3 5 TQFP 100 64 I LC4128V-75T100I 128 3.3 7.5 TQFP 100 64 I LC4128V-10T100I 128 3.3 10 TQFP 100 64 I 83 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V (3.3V) Industrial Devices (Cont.) Family Part Number Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4256V-5FT256AI 256 3.3 5 ftBGA 256 128 I LC4256V-75FT256AI 256 3.3 7.5 ftBGA 256 128 I LC4256V-10FT256AI 256 3.3 10 ftBGA 256 128 I LC4256V-5FT256BI 256 3.3 5 ftBGA 256 160 I LC4256V-75FT256BI 256 3.3 7.5 ftBGA 256 160 I LC4256V-10FT256BI 256 3.3 10 ftBGA 256 160 I 256 3.3 5 fpBGA 256 128 I LC4256V-5F256AI LC4256V LC4256V-75F256AI1 256 3.3 7.5 fpBGA 256 128 I LC4256V-10F256AI1 256 3.3 10 fpBGA 256 128 I LC4256V-5F256BI1 256 3.3 5 fpBGA 256 160 I LC4256V-75F256BI1 256 3.3 7.5 fpBGA 256 160 I LC4256V-10F256BI1 256 3.3 10 fpBGA 256 160 I LC4256V-5T176I 256 3.3 5 TQFP 176 128 I LC4256V-75T176I 256 3.3 7.5 TQFP 176 128 I LC4256V-10T176I 256 3.3 10 TQFP 176 128 I LC4256V-5T144I 256 3.3 5 TQFP 144 96 I LC4256V-75T144I 256 3.3 7.5 TQFP 144 96 I LC4256V-10T144I 256 3.3 10 TQFP 144 96 I LC4256V-5T100I 256 3.3 5 TQFP 100 64 I LC4256V-75T100I 256 3.3 7.5 TQFP 100 64 I LC4256V-10T100I 256 3.3 10 TQFP 100 64 I LC4384V-5FT256I 384 3.3 5 ftBGA 256 192 I LC4384V-75FT256I 384 3.3 7.5 ftBGA 256 192 I LC4384V-10FT256I 384 3.3 10 ftBGA 256 192 I 384 3.3 5 fpBGA 256 192 I LC4384V-5F256I LC4384V 1 LC4384V-75F256I1 384 3.3 7.5 fpBGA 256 192 I LC4384V-10F256I1 384 3.3 10 fpBGA 256 192 I LC4384V-5T176I 384 3.3 5 TQFP 176 128 I LC4384V-75T176I 384 3.3 7.5 TQFP 176 128 I LC4384V-10T176I 384 3.3 10 TQFP 176 128 I LC4512V-5FT256I 512 3.3 5 ftBGA 256 208 I LC4512V-75FT256I 512 3.3 7.5 ftBGA 256 208 I LC4512V-10FT256I 512 3.3 10 ftBGA 256 208 I LC4512V-5F256I LC4512V 1 1 512 3.3 5 fpBGA 256 208 I LC4512V-75F256I1 512 3.3 7.5 fpBGA 256 208 I LC4512V-10F256I1 512 3.3 10 fpBGA 256 208 I LC4512V-5T176I 512 3.3 5 TQFP 176 128 I LC4512V-75T176I 512 3.3 7.5 TQFP 176 128 I LC4512V-10T176I 512 3.3 10 TQFP 176 128 I 1. Use ftBGA package. fpBGA package devices have been discontinued via PCN#14A-07. 84 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V (3.3V) Extended Temperature Devices Device LC4032V LC4064V LC4128V LC4256V Part Number Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4032V-75T48E 32 3.3 7.5 TQFP 48 32 E LC4032V-75T44E 32 3.3 7.5 TQFP 44 30 E LC4064V-75T100E 64 3.3 7.5 TQFP 100 64 E LC4064V-75T48E 64 3.3 7.5 TQFP 48 32 E LC4064V-75T44E 64 3.3 7.5 TQFP 44 30 E LC4128V-75T144E 128 3.3 7.5 TQFP 144 96 E LC4128V-75T128E 128 3.3 7.5 TQFP 128 92 E LC4128V-75T100E 128 3.3 7.5 TQFP 100 64 E LC4256V-75T176E 256 3.3 7.5 TQFP 176 128 E LC4256V-75T144E 256 3.3 7.5 TQFP 144 96 E LC4256V-75T100E 256 3.3 7.5 TQFP 100 64 E 85 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Lead-Free Packaging ispMACH 4000Z (Zero Power, 1.8V) Lead-Free Commercial Devices Device Part Number LC4032ZC-35MN56C LC4032ZC LC4064ZC LC4128ZC LC4256ZC Macrocells Voltage tPD Package Pin/Ball Count I/O Grade 32 1.8 3.5 Lead-free csBGA 56 32 C LC4032ZC-5MN56C 32 1.8 5 Lead-free csBGA 56 32 C LC4032ZC-75MN56C 32 1.8 7.5 Lead-free csBGA 56 32 C LC4032ZC-35TN48C 32 1.8 3.5 Lead-free TQFP 48 32 C LC4032ZC-5TN48C 32 1.8 5 Lead-free TQFP 48 32 C LC4032ZC-75TN48C 32 1.8 7.5 Lead-free TQFP 48 32 C LC4064ZC-37MN132C 64 1.8 3.7 Lead-free csBGA 132 64 C LC4064ZC-5MN132C 64 1.8 5 Lead-free csBGA 132 64 C LC4064ZC-75MN132C 64 1.8 7.5 Lead-free csBGA 132 64 C LC4064ZC-37TN100C 64 1.8 3.7 Lead-free TQFP 100 64 C LC4064ZC-5TN100C 64 1.8 5 Lead-free TQFP 100 64 C LC4064ZC-75TN100C 64 1.8 7.5 Lead-free TQFP 100 64 C LC4064ZC-37MN56C 64 1.8 3.7 Lead-free csBGA 56 32 C LC4064ZC-5MN56C 64 1.8 5 Lead-free csBGA 56 32 C LC4064ZC-75MN56C 64 1.8 7.5 Lead-free csBGA 56 32 C LC4064ZC-37TN48C 64 1.8 3.7 Lead-free TQFP 48 32 C LC4064ZC-5TN48C 64 1.8 5 Lead-free TQFP 48 32 C LC4064ZC-75TN48C 64 1.8 7.5 Lead-free TQFP 48 32 C LC4128ZC-42MN132C 128 1.8 4.2 Lead-free csBGA 132 96 C LC4128ZC-75MN132C 128 1.8 7.5 Lead-free csBGA 132 96 C LC4128ZC-42TN100C 128 1.8 4.2 Lead-free TQFP 100 64 C LC4128ZC-75TN100C 128 1.8 7.5 Lead-free TQFP 100 64 C LC4256ZC-45TN176C 256 1.8 4.5 Lead-free TQFP 176 128 C LC4256ZC-75TN176C 256 1.8 7.5 Lead-free TQFP 176 128 C LC4256ZC-45MN132C 256 1.8 4.5 Lead-free csBGA 132 96 C LC4256ZC-75MN132C 256 1.8 7.5 Lead-free csBGA 132 96 C LC4256ZC-45TN100C 256 1.8 4.5 Lead-free TQFP 100 64 C LC4256ZC-75TN100C 256 1.8 7.5 Lead-free TQFP 100 64 C I/O Grade ispMACH 4000Z (Zero Power, 1.8V) Lead-Free Industrial Devices Device LC4032ZC Part Number Macrocells Voltage tPD Package Pin/Ball Count LC4032ZC-5MN56I 32 1.8 5 Lead-free csBGA 56 32 I LC4032ZC-75MN56I 32 1.8 7.5 Lead-free csBGA 56 32 I LC4032ZC-5TN48I 32 1.8 5 Lead-free TQFP 48 32 I LC4032ZC-75TN48I 32 1.8 7.5 Lead-free TQFP 48 32 I 86 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000Z (Zero Power, 1.8V) Lead-Free Industrial Devices (Cont.) Device LC4064ZC LC4128ZC LC4256ZC Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4064ZC-5MN132I 64 1.8 5 Lead-free csBGA 132 64 I LC4064ZC-75MN132I 64 1.8 7.5 Lead-free csBGA 132 64 I LC4064ZC-5TN100I 64 1.8 5 Lead-free TQFP 100 64 I LC4064ZC-75TN100I 64 1.8 7.5 Lead-free TQFP 100 64 I Part Number LC4064ZC-5MN56I 64 1.8 5 Lead-free csBGA 56 32 I LC4064ZC-75MN56I 64 1.8 7.5 Lead-free csBGA 56 32 I LC4064ZC-5TN48I 64 1.8 5 Lead-free TQFP 48 32 I LC4064ZC-75TN48I 64 1.8 7.5 Lead-free TQFP 48 32 I LC4128ZC-75MN132I 128 1.8 7.5 Lead-free csBGA 132 96 I LC4128ZC-75TN100I 128 1.8 7.5 Lead-free TQFP 100 64 I LC4256ZC-75TN176I 256 1.8 7.5 Lead-free TQFP 176 128 I LC4256ZC-75MN132I 256 1.8 7.5 Lead-free csBGA 132 96 I LC4256ZC-75TN100I 256 1.8 7.5 Lead-free TQFP 100 64 I I/O Grade ispMACH 4000Z (Zero Power, 1.8V) Lead-Free Extended Temperature Devices Device LC4032ZC LC4064ZC LC4128ZC LC4256ZC Part Number Package Pin/Ball Count Macrocells Voltage tPD LC4032ZC-75TN48E 32 1.8 7.5 Lead-free TQFP 48 32 E LC4064ZC-75TN100E 64 1.8 7.5 Lead-free TQFP 100 64 E LC4064ZC-75TN48E 64 1.8 7.5 Lead-free TQFP 48 32 E LC4128ZC-75TN100E 128 1.8 7.5 Lead-free TQFP 100 64 E LC4256ZC-75TN176E 256 1.8 7.5 Lead-free TQFP 176 128 E LC4256ZC-75TN100E 256 1.8 7.5 Lead-free TQFP 100 64 E Pin/Ball Count ispMACH 4000C (1.8V) Lead-Free Commercial Devices Device LC4032C Part Number Macrocells Voltage tPD I/O Grade LC4032C-25TN48C 32 1.8 2.5 Lead-free TQFP 48 32 C LC4032C-5TN48C 32 1.8 5 Lead-free TQFP 48 32 C LC4032C-75TN48C 32 1.8 7.5 Lead-free TQFP 48 32 C LC4032C-25TN44C 32 1.8 2.5 Lead-free TQFP 44 30 C LC4032C-5TN44C 32 1.8 5 Lead-free TQFP 44 30 C LC4032C-75TN44C 32 1.8 7.5 Lead-free TQFP 44 30 C 87 Package Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000C (1.8V) Lead-Free Commercial Devices (Cont.) Device Part Number LC4064C-25TN100C LC4064C LC4128C LC4256C Voltage tPD 64 1.8 2.5 Package Lead-free TQFP Pin/Ball Count I/O Grade 100 64 C LC4064C-5TN100C 64 1.8 5 Lead-free TQFP 100 64 C LC4064C-75TN100C 64 1.8 7.5 Lead-free TQFP 100 64 C LC4064C-25TN48C 64 1.8 2.5 Lead-free TQFP 48 32 C LC4064C-5TN48C 64 1.8 5 Lead-free TQFP 48 32 C LC4064C-75TN48C 64 1.8 7.5 Lead-free TQFP 48 32 C LC4064C-25TN44C 64 1.8 2.5 Lead-free TQFP 44 30 C LC4064C-5TN44C 64 1.8 5 Lead-free TQFP 44 30 C LC4064C-75TN44C 64 1.8 7.5 Lead-free TQFP 44 30 C LC4128C-27TN128C 128 1.8 2.7 Lead-free TQFP 128 92 C LC4128C-5TN128C 128 1.8 5 Lead-free TQFP 128 92 C LC4128C-75TN128C 128 1.8 7.5 Lead-free TQFP 128 92 C LC4128C-27TN100C 128 1.8 2.7 Lead-free TQFP 100 64 C LC4128C-5TN100C 128 1.8 5 Lead-free TQFP 100 64 C LC4128C-75TN100C 128 1.8 7.5 Lead-free TQFP 100 64 C LC4256C-3FTN256AC 256 1.8 3 Lead-free ftBGA 256 128 C LC4256C-5FTN256AC 256 1.8 5 Lead-free ftBGA 256 128 C LC4256C-75FTN256AC 256 1.8 7.5 Lead-free ftBGA 256 128 C LC4256C-3FTN256BC 256 1.8 3 Lead-free ftBGA 256 160 C LC4256C-5FTN256BC 256 1.8 5 Lead-free ftBGA 256 160 C LC4256C-75FTN256BC 256 1.8 7.5 Lead-free ftBGA 256 160 C LC4256C-3FN256AC 1 256 1.8 3 Lead-free fpBGA 256 128 C LC4256C-5FN256AC 1 256 1.8 5 Lead-free fpBGA 256 128 C LC4256C-75FN256AC1 256 1.8 7.5 Lead-free fpBGA 256 128 C LC4256C-3FN256BC1 256 1.8 3 Lead-free fpBGA 256 160 C 1 LC4256C-5FN256BC LC4384C Macrocells 256 1.8 5 Lead-free fpBGA 256 160 C LC4256C-75FN256BC1 256 1.8 7.5 Lead-free fpBGA 256 160 C LC4256C-3TN176C 256 1.8 3 Lead-free TQFP 176 128 C LC4256C-5TN176C 256 1.8 5 Lead-free TQFP 176 128 C LC4256C-75TN176C 256 1.8 7.5 Lead-free TQFP 176 128 C LC4256C-3TN100C 256 1.8 3 Lead-free TQFP 100 64 C LC4256C-5TN100C 256 1.8 5 Lead-free TQFP 100 64 C LC4256C-75TN100C 256 1.8 7.5 Lead-free TQFP 100 64 C LC4384C-35FTN256C 384 1.8 3.5 Lead-free ftBGA 256 192 C LC4384C-5FTN256C 384 1.8 5 Lead-free ftBGA 256 192 C LC4384C-75FTN256C 384 1.8 7.5 Lead-free ftBGA 256 192 C LC4384C-35FN256C1 384 1.8 3.5 Lead-free fpBGA 256 192 C LC4384C-5FN256C 1 384 1.8 5 Lead-free fpBGA 256 192 C LC4384C-75FN256C1 384 1.8 7.5 Lead-free fpBGA 256 192 C LC4384C-35TN176C 384 1.8 3.5 Lead-free TQFP 176 128 C LC4384C-5TN176C 384 1.8 5 Lead-free TQFP 176 128 C LC4384C-75TN176C 384 1.8 7.5 Lead-free TQFP 176 128 C 88 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000C (1.8V) Lead-Free Commercial Devices (Cont.) Device Part Number I/O Grade Lead-free ftBGA 256 208 C 5 Lead-free ftBGA 256 208 C 7.5 Lead-free ftBGA 256 208 C Lead-free fpBGA 256 208 C Voltage tPD LC4512C-35FTN256C 512 1.8 3.5 LC4512C-5FTN256C 512 1.8 LC4512C-75FTN256C 512 1.8 512 1.8 3.5 LC4512C-35FN256C LC4512C Pin/Ball Count Macrocells LC4512C-5FN256C 1 1 Package 512 1.8 5 Lead-free fpBGA 256 208 C LC4512C-75FN256C1 512 1.8 7.5 Lead-free fpBGA 256 208 C LC4512C-35TN176C 512 1.8 3.5 Lead-free TQFP 176 128 C LC4512C-5TN176C 512 1.8 5 Lead-free TQFP 176 128 C LC4512C-75TN176C 512 1.8 7.5 Lead-free TQFP 176 128 C Pin/Ball Count I/O Grade Lead-free TQFP 48 32 I 1. Use ftBGA package. fpBGA package devices have been discontinued via PCN#14A-07. ispMACH 4000C (1.8V) Lead-Free Industrial Devices Device LC4032C LC4064C LC4128C Part Number Macrocells Voltage tPD Package LC4032C-5TN48I 32 1.8 5 LC4032C-75TN48I 32 1.8 7.5 Lead-free TQFP 48 32 I LC4032C-10TN48I 32 1.8 10 Lead-free TQFP 48 32 I LC4032C-5TN44I 32 1.8 5 Lead-free TQFP 44 30 I LC4032C-75TN44I 32 1.8 7.5 Lead-free TQFP 44 30 I LC4032C-10TN44I 32 1.8 10 Lead-free TQFP 44 30 I LC4064C-5TN100I 64 1.8 5 Lead-free TQFP 100 64 I LC4064C-75TN100I 64 1.8 7.5 Lead-free TQFP 100 64 I LC4064C-10TN100I 64 1.8 10 Lead-free TQFP 100 64 I LC4064C-5TN48I 64 1.8 5 Lead-free TQFP 48 32 I LC4064C-75TN48I 64 1.8 7.5 Lead-free TQFP 48 32 I LC4064C-10TN48I 64 1.8 10 Lead-free TQFP 48 32 I LC4064C-5TN44I 64 1.8 5 Lead-free TQFP 44 30 I LC4064C-75TN44I 64 1.8 5 Lead-free TQFP 44 30 I LC4064C-10TN44I 64 1.8 10 Lead-free TQFP 44 30 I LC4128C-5TN128I 128 1.8 5 Lead-free TQFP 128 92 I LC4128C-75TN128I 128 1.8 7.5 Lead-free TQFP 128 92 I LC4128C-10TN128I 128 1.8 10 Lead-free TQFP 128 92 I LC4128C-5TN100I 128 1.8 5 Lead-free TQFP 100 64 I LC4128C-75TN100I 128 1.8 7.5 Lead-free TQFP 100 64 I LC4128C-10TN100I 128 1.8 10 Lead-free TQFP 100 64 I 89 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000C (1.8V) Lead-Free Industrial Devices (Cont.) Device LC4256C Pin/Ball Count I/O Grade Lead-free ftBGA 256 128 I 7.5 Lead-free ftBGA 256 128 I 10 Lead-free ftBGA 256 128 I 1.8 5 Lead-free ftBGA 256 160 I 256 1.8 7.5 Lead-free ftBGA 256 160 I 256 1.8 10 Lead-free ftBGA 256 160 I 256 1.8 5 Lead-free fpBGA 256 128 I 1 LC4256C-75FN256AI 256 1.8 7.5 Lead-free fpBGA 256 128 I LC4256C-10FN256AI1 256 1.8 10 Lead-free fpBGA 256 128 I LC4256C-5FN256BI1 256 1.8 5 Lead-free fpBGA 256 160 I 1 LC4256C-75FN256BI 256 1.8 7.5 Lead-free fpBGA 256 160 I LC4256C-10FN256BI1 256 1.8 10 Lead-free fpBGA 256 160 I LC4256C-5TN176I 256 1.8 5 Lead-free TQFP 176 128 I LC4256C-75TN176I 256 1.8 7.5 Lead-free TQFP 176 128 I LC4256C-10TN176I 256 1.8 10 Lead-free TQFP 176 128 I LC4256C-5TN100I 256 1.8 5 Lead-free TQFP 100 64 I LC4256C-75TN100I 256 1.8 7.5 Lead-free TQFP 100 64 I LC4256C-10TN100I 256 1.8 10 Lead-free TQFP 100 64 I LC4384C-5FTN256I 384 1.8 5 Lead-free ftBGA 256 192 I LC4384C-75FTN256I 384 1.8 7.5 Lead-free ftBGA 256 192 I LC4384C-10FTN256I 384 1.8 10 Lead-free ftBGA 256 192 I Part Number Macrocells Voltage tPD LC4256C-5FTN256AI 256 1.8 5 LC4256C-75FTN256AI 256 1.8 LC4256C-10FTN256AI 256 1.8 LC4256C-5FTN256BI 256 LC4256C-75FTN256BI LC4256C-10FTN256BI LC4256C-5FN256AI1 1 LC4384C-5FN256I LC4384C LC4512C Package 384 1.8 5 Lead-free fpBGA 256 192 I 1 384 1.8 7.5 Lead-free fpBGA 256 192 I LC4384C-10FN256I1 384 1.8 10 Lead-free fpBGA 256 192 I LC4384C-5TN176I 384 1.8 5 Lead-free TQFP 176 128 I LC4384C-75TN176I 384 1.8 7.5 Lead-free TQFP 176 128 I LC4384C-10TN176I 384 1.8 10 Lead-free TQFP 176 128 I LC4512C-5FTN256I 512 1.8 5 Lead-free ftBGA 256 208 I LC4512C-75FTN256I 512 1.8 7.5 Lead-free ftBGA 256 208 I LC4512C-10FTN256I 512 1.8 10 Lead-free ftBGA 256 208 I LC4512C-5FN256I1 512 1.8 5 Lead-free fpBGA 256 208 I 1 512 1.8 7.5 Lead-free fpBGA 256 208 I LC4512C-10FN256I1 512 1.8 10 Lead-free fpBGA 256 208 I LC4512C-5TN176I 512 1.8 5 Lead-free TQFP 176 128 I LC4512C-75TN176I 512 1.8 7.5 Lead-free TQFP 176 128 I LC4512C-10TN176I 512 1.8 10 Lead-free TQFP 176 128 I LC4384C-75FN256I LC4512C-75FN256I 1. Use ftBGA package. fpBGA package devices have been discontinued via PCN#14A-07. 90 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000B (2.5V) Lead-Free Commercial Devices Device Part Number LC4032B-25TN48C LC4032B LC4064B LC4128B LC4256B Macrocells Voltage tPD Package Pin/Ball Count I/O Grade 32 2.5 2.5 Lead-Free TQFP 48 32 C LC4032B-5TN48C 32 2.5 5 Lead-Free TQFP 48 32 C LC4032B-75TN48C 32 2.5 7.5 Lead-Free TQFP 48 32 C LC4032B-25TN44C 32 2.5 2.5 Lead-Free TQFP 44 30 C LC4032B-5TN44C 32 2.5 5 Lead-Free TQFP 44 30 C LC4032B-75TN44C 32 2.5 7.5 Lead-Free TQFP 44 30 C LC4064B-25TN100C 64 2.5 2.5 Lead-Free TQFP 100 64 C LC4064B-5TN100C 64 2.5 5 Lead-Free TQFP 100 64 C LC4064B-75TN100C 64 2.5 7.5 Lead-Free TQFP 100 64 C LC4064B-25TN48C 64 2.5 2.5 Lead-Free TQFP 48 32 C LC4064B-5TN48C 64 2.5 5 Lead-Free TQFP 48 32 C LC4064B-75TN48C 64 2.5 7.5 Lead-Free TQFP 48 32 C LC4064B-25TN44C 64 2.5 2.5 Lead-Free TQFP 44 30 C LC4064B-5TN44C 64 2.5 5 Lead-Free TQFP 44 30 C LC4064B-75TN44C 64 2.5 7.5 Lead-Free TQFP 44 30 C LC4128B-27TN128C 128 2.5 2.7 Lead-Free TQFP 128 92 C LC4128B-5TN128C 128 2.5 5 Lead-Free TQFP 128 92 C LC4128B-75TN128C 128 2.5 7.5 Lead-Free TQFP 128 92 C LC4128B-27TN100C 128 2.5 2.7 Lead-Free TQFP 100 92 C LC4128B-5TN100C 128 2.5 5 Lead-Free TQFP 100 92 C LC4128B-75TN100C 128 2.5 7.5 Lead-Free TQFP 100 92 C LC4256B-3FTN256AC 256 2.5 3 Lead-Free ftBGA 256 128 C LC4256B-5FTN256AC 256 2.5 5 Lead-Free ftBGA 256 128 C LC4256B-75FTN256AC 256 2.5 7.5 Lead-Free ftBGA 256 128 C LC4256B-3FTN256BC 256 2.5 3 Lead-Free ftBGA 256 160 C LC4256B-5FTN256BC 256 2.5 5 Lead-Free ftBGA 256 160 C LC4256B-75FTN256BC 256 2.5 7.5 Lead-Free ftBGA 256 160 C 1 LC4256B-3FN256AC 256 2.5 3 Lead-Free fpBGA 256 128 C LC4256B-5FN256AC1 256 2.5 5 Lead-Free fpBGA 256 128 C LC4256B-75FN256AC1 256 2.5 7.5 Lead-Free fpBGA 256 128 C LC4256B-3FN256BC1 256 2.5 3 Lead-Free fpBGA 256 160 C LC4256B-5FN256BC1 256 2.5 5 Lead-Free fpBGA 256 160 C LC4256B-75FN256BC1 256 2.5 7.5 Lead-Free fpBGA 256 160 C LC4256B-3TN176C 256 2.5 3 Lead-Free TQFP 176 128 C LC4256B-5TN176C 256 2.5 5 Lead-Free TQFP 176 128 C LC4256B-75TN176C 256 2.5 7.5 Lead-Free TQFP 176 128 C LC4256B-3TN100C 256 2.5 3 Lead-Free TQFP 100 64 C LC4256B-5TN100C 256 2.5 5 Lead-Free TQFP 100 64 C LC4256B-75TN100C 256 2.5 7.5 Lead-Free TQFP 100 64 C 91 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000B (2.5V) Lead-Free Commercial Devices (Cont.) Device LC4384B LC4512B Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4384B-35FTN256C 384 2.5 3.5 Lead-Free ftBGA 256 192 C LC4384B-5FTN256C 384 2.5 5 Lead-Free ftBGA 256 192 C LC4384B-75FTN256C 384 2.5 7.5 Lead-Free ftBGA 256 192 C LC4384B-35FN256C1 384 2.5 3.5 Lead-Free fpBGA 256 192 C Part Number LC4384B-5FN256C 1 384 2.5 5 Lead-Free fpBGA 256 192 C LC4384B-75FN256C1 384 2.5 7.5 Lead-Free fpBGA 256 192 C LC4384B-35TN176C 384 2.5 3.5 Lead-Free TQFP 176 128 C LC4384B-5TN176C 384 2.5 5 Lead-Free TQFP 176 128 C LC4384B-75TN176C 384 2.5 7.5 Lead-Free TQFP 176 128 C LC4512B-35FTN256C 512 2.5 3.5 Lead-Free ftBGA 256 208 C LC4512B-5FTN256C 512 2.5 5 Lead-Free ftBGA 256 208 C LC4512B-75FTN256C 512 2.5 7.5 Lead-Free ftBGA 256 208 C LC4512B-35FN256C1 512 2.5 3.5 Lead-Free fpBGA 256 208 C 5 Lead-Free fpBGA 256 208 C LC4512B-5FN256C 1 512 2.5 LC4512B-75FN256C1 512 2.5 7.5 Lead-Free fpBGA 256 208 C LC4512B-35TN176C 512 2.5 3.5 Lead-Free TQFP 176 128 C LC4512B-5TN176C 512 2.5 5 Lead-Free TQFP 176 128 C LC4512B-75TN176C 512 2.5 7.5 Lead-Free TQFP 176 128 C 1. Use ftBGA package. fpBGA package devices have been discontinued via PCN#14A-07. ispMACH 4000B (2.5V) Lead-Free Industrial Devices Device LC4032B LC4064B Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4032B-5TN48I 32 2.5 5 Lead-Free TQFP 48 32 I LC4032B-75TN48I 32 2.5 7.5 Lead-Free TQFP 48 32 I LC4032B-10TN48I 32 2.5 10 Lead-Free TQFP 48 32 I LC4032B-5TN44I 32 2.5 5 Lead-Free TQFP 44 30 I LC4032B-75TN44I 32 2.5 7.5 Lead-Free TQFP 44 30 I LC4032B-10TN44I 32 2.5 10 Lead-Free TQFP 44 30 I LC4064B-5TN100I 64 2.5 5 Lead-Free TQFP 100 64 I LC4064B-75TN100I 64 2.5 7.5 Lead-Free TQFP 100 64 I LC4064B-10TN100I 64 2.5 10 Lead-Free TQFP 100 64 I LC4064B-5TN48I 64 2.5 5 Lead-Free TQFP 48 32 I LC4064B-75TN48I 64 2.5 7.5 Lead-Free TQFP 48 32 I LC4064B-10TN48I 64 2.5 10 Lead-Free TQFP 48 32 I LC4064B-5TN44I 64 2.5 5 Lead-Free TQFP 44 30 I LC4064B-75TN44I 64 2.5 7.5 Lead-Free TQFP 44 30 I LC4064B-10TN44I 64 2.5 10 Lead-Free TQFP 44 30 I Part Number 92 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000B (2.5V) Lead-Free Industrial Devices (Cont.) Device LC4128B LC4256B LC4384B LC4512B Macrocells Voltage tPD Package Pin/Ball Count I/O Grade LC4128B-5TN128I 128 2.5 5 Lead-Free TQFP 128 92 I LC4128B-75TN128I 128 2.5 7.5 Lead-Free TQFP 128 92 I LC4128B-10TN128I 128 2.5 10 Lead-Free TQFP 128 92 I LC4128B-5TN100I 128 2.5 5 Lead-Free TQFP 100 64 I LC4128B-75TN100I 128 2.5 7.5 Lead-Free TQFP 100 64 I LC4128B-10TN100I 128 2.5 10 Lead-Free TQFP 100 64 I LC4256B-5FTN256AI 256 2.5 5 Lead-Free ftBGA 256 128 I LC4256B-75FTN256AI 256 2.5 7.5 Lead-Free ftBGA 256 128 I LC4256B-10FTN256AI 256 2.5 10 Lead-Free ftBGA 256 128 I LC4256B-5FTN256BI 256 2.5 5 Lead-Free ftBGA 256 160 I LC4256B-75FTN256BI 256 2.5 7.5 Lead-Free ftBGA 256 160 I LC4256B-10FTN256BI 256 2.5 10 Lead-Free ftBGA 256 160 I LC4256B-5FN256AI1 256 2.5 5 Lead-Free fpBGA 256 128 I 1 LC4256B-75FN256AI 256 2.5 7.5 Lead-Free fpBGA 256 128 I LC4256B-10FN256AI1 256 2.5 10 Lead-Free fpBGA 256 128 I LC4256B-5FN256BI1 256 2.5 5 Lead-Free fpBGA 256 160 I Part Number 1 LC4256B-75FN256BI 256 2.5 7.5 Lead-Free fpBGA 256 160 I LC4256B-10FN256BI1 256 2.5 10 Lead-Free fpBGA 256 160 I LC4256B-5TN176I 256 2.5 5 Lead-Free TQFP 176 128 I LC4256B-75TN176I 256 2.5 7.5 Lead-Free TQFP 176 128 I LC4256B-10TN176I 256 2.5 10 Lead-Free TQFP 176 128 I LC4256B-5TN100I 256 2.5 5 Lead-Free TQFP 100 64 I LC4256B-75TN100I 256 2.5 7.5 Lead-Free TQFP 100 64 I LC4256B-10TN100I 256 2.5 10 Lead-Free TQFP 100 64 I LC4384B-5FTN256I 384 2.5 5 Lead-Free ftBGA 256 192 I LC4384B-75FTN256I 384 2.5 7.5 Lead-Free ftBGA 256 192 I LC4384B-10FTN256I 384 2.5 10 Lead-Free ftBGA 256 192 I LC4384B-5FN256I1 384 2.5 5 Lead-Free fpBGA 256 192 I 1 LC4384B-75FN256I 384 2.5 7.5 Lead-Free fpBGA 256 192 I LC4384B-10FN256I1 384 2.5 10 Lead-Free fpBGA 256 192 I LC4384B-5TN176I 384 2.5 5 Lead-Free TQFP 176 128 I LC4384B-75TN176I 384 2.5 7.5 Lead-Free TQFP 176 128 I LC4384B-10TN176I 384 2.5 10 Lead-Free TQFP 176 128 I LC4512B-5FTN256I 512 2.5 5 Lead-Free ftBGA 256 208 I LC4512B-75FTN256I 512 2.5 7.5 Lead-Free ftBGA 256 208 I LC4512B-10FTN256I 512 2.5 10 Lead-Free ftBGA 256 208 I LC4512B-5FN256I1 512 2.5 5 Lead-Free fpBGA 256 208 I 1 LC4512B-75FN256I 512 2.5 7.5 Lead-Free fpBGA 256 208 I LC4512B-10FN256I1 512 2.5 10 Lead-Free fpBGA 256 208 I LC4512B-5TN176I 512 2.5 5 Lead-Free TQFP 176 128 I LC4512B-75TN176I 512 2.5 7.5 Lead-Free TQFP 176 128 I LC4512B-10TN176I 512 2.5 10 Lead-Free TQFP 176 128 I 1. Use ftBGA package. fpBGA package devices have been discontinued via PCN#14A-07. 93 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V (3.3V) Lead-Free Commercial Devices Device Part Number LC4032V-25TN48C LC4032V LC4064V LC4128V Macrocells Voltage tPD 32 3.3 2.5 Package Lead-free TQFP Pin/Ball Count I/O Grade 48 32 C LC4032V-5TN48C 32 3.3 5 Lead-free TQFP 48 32 C LC4032V-75TN48C 32 3.3 7.5 Lead-free TQFP 48 32 C LC4032V-25TN44C 32 3.3 2.5 Lead-free TQFP 44 30 C LC4032V-5TN44C 32 3.3 5 Lead-free TQFP 44 30 C LC4032V-75TN44C 32 3.3 7.5 Lead-free TQFP 44 30 C LC4064V-25TN100C 64 3.3 2.5 Lead-free TQFP 100 64 C LC4064V-5TN100C 64 3.3 5 Lead-free TQFP 100 64 C LC4064V-75TN100C 64 3.3 7.5 Lead-free TQFP 100 64 C LC4064V-25TN48C 64 3.3 2.5 Lead-free TQFP 48 32 C LC4064V-5TN48C 64 3.3 5 Lead-free TQFP 48 32 C LC4064V-75TN48C 64 3.3 7.5 Lead-free TQFP 48 32 C LC4064V-25TN44C 64 3.3 2.5 Lead-free TQFP 44 30 C LC4064V-5TN44C 64 3.3 5 Lead-free TQFP 44 30 C LC4064V-75TN44C 64 3.3 7.5 Lead-free TQFP 44 30 C LC4128V-27TN144C 128 3.3 2.7 Lead-free TQFP 144 96 C LC4128V-5TN144C 128 3.3 5 Lead-free TQFP 144 96 C LC4128V-75TN144C 128 3.3 7.5 Lead-free TQFP 144 96 C LC4128V-27TN128C 128 3.3 2.7 Lead-free TQFP 128 92 C LC4128V-5TN128C 128 3.3 5 Lead-free TQFP 128 92 C LC4128V-75TN128C 128 3.3 7.5 Lead-free TQFP 128 92 C LC4128V-27TN100C 128 3.3 2.7 Lead-free TQFP 100 64 C LC4128V-5TN100C 128 3.3 5 Lead-free TQFP 100 64 C LC4128V-75TN100C 128 3.3 7.5 Lead-free TQFP 100 64 C 94 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V (3.3V) Lead-Free Commercial Devices (Cont.) Device LC4256V LC4384V Pin/Ball Count I/O Grade Lead-free ftBGA 256 128 C 5 Lead-free ftBGA 256 128 C 7.5 Lead-free ftBGA 256 128 C 3 Lead-free ftBGA 256 160 C 3.3 5 Lead-free ftBGA 256 160 C 3.3 7.5 Lead-free ftBGA 256 160 C 256 3.3 3 Lead-free fpBGA 256 128 C LC4256V-5FN256AC 256 3.3 5 Lead-free fpBGA 256 128 C LC4256V-75FN256AC1 256 3.3 7.5 Lead-free fpBGA 256 128 C LC4256V-3FN256BC1 256 3.3 3 Lead-free fpBGA 256 160 C 1 LC4256V-5FN256BC 256 3.3 5 Lead-free fpBGA 256 160 C LC4256V-75FN256BC1 256 3.3 7.5 Lead-free fpBGA 256 160 C LC4256V-3TN176C 256 3.3 3 Lead-free TQFP 176 128 C Part Number Macrocells Voltage tPD LC4256V-3FTN256AC 256 3.3 3 LC4256V-5FTN256AC 256 3.3 LC4256V-75FTN256AC 256 3.3 LC4256V-3FTN256BC 256 3.3 LC4256V-5FTN256BC 256 LC4256V-75FTN256BC 256 LC4256V-3FN256AC1 1 LC4256V-5TN176C 256 3.3 5 Lead-free TQFP 176 128 C LC4256V-75TN176C 256 3.3 7.5 Lead-free TQFP 176 128 C LC4256V-3TN144C 256 3.3 3 Lead-free TQFP 144 96 C LC4256V-5TN144C 256 3.3 5 Lead-free TQFP 144 96 C LC4256V-75TN144C 256 3.3 7.5 Lead-free TQFP 144 96 C LC4256V-3TN100C 256 3.3 3 Lead-free TQFP 100 64 C LC4256V-5TN100C 256 3.3 5 Lead-free TQFP 100 64 C LC4256V-75TN100C 256 3.3 7.5 Lead-free TQFP 100 64 C LC4384V-35FTN256C 384 3.3 3.5 Lead-free ftBGA 256 192 C LC4384V-5FTN256C 384 3.3 5 Lead-free ftBGA 256 192 C LC4384V-75FTN256C 384 3.3 7.5 Lead-free ftBGA 256 192 C LC4384V-35FN256C1 384 3.3 3.5 Lead-free fpBGA 256 192 C LC4384V-5FN256C 1 384 3.3 5 Lead-free fpBGA 256 192 C LC4384V-75FN256C1 384 3.3 7.5 Lead-free fpBGA 256 192 C LC4384V-35TN176C 384 3.3 3.5 Lead-free TQFP 176 128 C LC4384V-5TN176C 384 3.3 5 Lead-free TQFP 176 128 C LC4384V-75TN176C 384 3.3 7.5 Lead-free TQFP 176 128 C LC4512V-35FTN256C 512 3.3 3.5 Lead-free ftBGA 256 208 C LC4512V-5FTN256C 512 3.3 5 Lead-free ftBGA 256 208 C LC4512V-75FTN256C 512 3.3 7.5 Lead-free ftBGA 256 208 C 512 3.3 3.5 Lead-free fpBGA 256 208 C 1 LC4512V-35FN256C LC4512V Package LC4512V-5FN256C 1 512 3.3 5 Lead-free fpBGA 256 208 C LC4512V-75FN256C1 512 3.3 7.5 Lead-free fpBGA 256 208 C LC4512V-35TN176C 512 3.3 3.5 Lead-free TQFP 176 128 C LC4512V-5TN176C 512 3.3 5 Lead-free TQFP 176 128 C LC4512V-75TN176C 512 3.3 7.5 Lead-free TQFP 176 128 C 1. Use ftBGA package. fpBGA package devices have been discontinued via PCN#14A-07. 95 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V (3.3V) Lead-Free Industrial Devices Device LC4032V LC4064V LC4128V Part Number Pin/Ball Count I/O Grade Lead-free TQFP 48 32 I 7.5 Lead-free TQFP 48 32 I 10 Lead-free TQFP 48 32 I Macrocells Voltage tPD LC4032V-5TN48I 32 3.3 5 LC4032V-75TN48I 32 3.3 LC4032V-10TN48I 32 3.3 Package LC4032V-5TN44I 32 3.3 5 Lead-free TQFP 44 30 I LC4032V-75TN44I 32 3.3 7.5 Lead-free TQFP 44 30 I LC4032V-10TN44I 32 3.3 10 Lead-free TQFP 44 30 I LC4064V-5TN100I 64 3.3 5 Lead-free TQFP 100 64 I LC4064V-75TN100I 64 3.3 7.5 Lead-free TQFP 100 64 I LC4064V-10TN100I 64 3.3 10 Lead-free TQFP 100 64 I LC4064V-5TN48I 64 3.3 5 Lead-free TQFP 48 32 I LC4064V-75TN48I 64 3.3 7.5 Lead-free TQFP 48 32 I LC4064V-10TN48I 64 3.3 10 Lead-free TQFP 48 32 I LC4064V-5TN44I 64 3.3 5 Lead-free TQFP 44 30 I LC4064V-75TN44I 64 3.3 7.5 Lead-free TQFP 44 30 I LC4064V-10TN44I 64 3.3 10 Lead-free TQFP 44 30 I LC4128V-5TN144I 128 3.3 5 Lead-free TQFP 144 96 I LC4128V-75TN144I 128 3.3 7.5 Lead-free TQFP 144 96 I LC4128V-10TN144I 128 3.3 10 Lead-free TQFP 144 96 I LC4128V-5TN128I 128 3.3 5 Lead-free TQFP 128 92 I LC4128V-75TN128I 128 3.3 7.5 Lead-free TQFP 128 92 I LC4128V-10TN128I 128 3.3 10 Lead-free TQFP 128 92 I LC4128V-5TN100I 128 3.3 5 Lead-free TQFP 100 64 I LC4128V-75TN100I 128 3.3 7.5 Lead-free TQFP 100 64 I LC4128V-10TN100I 128 3.3 10 Lead-free TQFP 100 64 I 96 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V (3.3V) Lead-Free Industrial Devices (Cont.) Device LC4256V LC4384V Pin/Ball Count I/O Grade Lead-free ftBGA 256 128 I 7.5 Lead-free ftBGA 256 128 I 10 Lead-free ftBGA 256 128 I 3.3 5 Lead-free ftBGA 256 160 I 256 3.3 7.5 Lead-free ftBGA 256 160 I 256 3.3 10 Lead-free ftBGA 256 160 I LC4256V-5FN256AI1 256 3.3 5 Lead-free fpBGA 256 128 I LC4256V-75FN256AI1 256 3.3 7.5 Lead-free fpBGA 256 128 I LC4256V-10FN256AI1 256 3.3 10 Lead-free fpBGA 256 128 I LC4256V-5FN256BI1 256 3.3 5 Lead-free fpBGA 256 160 I 1 LC4256V-75FN256BI 256 3.3 7.5 Lead-free fpBGA 256 160 I LC4256V-10FN256BI1 256 3.3 10 Lead-free fpBGA 256 160 I LC4256V-5TN176I 256 3.3 5 Lead-free TQFP 176 128 I LC4256V-75TN176I 256 3.3 7.5 Lead-free TQFP 176 128 I LC4256V-10TN176I 256 3.3 10 Lead-free TQFP 176 128 I LC4256V-5TN144I 256 3.3 5 Lead-free TQFP 144 96 I LC4256V-75TN144I 256 3.3 7.5 Lead-free TQFP 144 96 I LC4256V-10TN144I 256 3.3 10 Lead-free TQFP 144 96 I LC4256V-5TN100I 256 3.3 5 Lead-free TQFP 100 64 I LC4256V-75TN100I 256 3.3 7.5 Lead-free TQFP 100 64 I LC4256V-10TN100I 256 3.3 10 Lead-free TQFP 100 64 I LC4384V-5FTN256I 384 3.3 5 Lead-free ftBGA 256 192 I LC4384V-75FTN256I 384 3.3 7.5 Lead-free ftBGA 256 192 I LC4384V-10FTN256I 384 3.3 10 Lead-free ftBGA 256 192 I LC4384V-5FN256I1 384 3.3 5 Lead-free fpBGA 256 192 I 1 LC4384V-75FN256I 384 3.3 7.5 Lead-free fpBGA 256 192 I LC4384V-10FN256I1 384 3.3 10 Lead-free fpBGA 256 192 I LC4384V-5TN176I 384 3.3 5 Lead-free TQFP 176 128 I LC4384V-75TN176I 384 3.3 7.5 Lead-free TQFP 176 128 I LC4384V-10TN176I 384 3.3 10 Lead-free TQFP 176 128 I LC4512V-5FTN256I 512 3.3 5 Lead-free ftBGA 256 208 I LC4512V-75FTN256I 512 3.3 7.5 Lead-free ftBGA 256 208 I LC4512V-10FTN256I 512 3.3 10 Lead-free ftBGA 256 208 I Part Number Macrocells Voltage tPD LC4256V-5FTN256AI 256 3.3 5 LC4256V-75FTN256AI 256 3.3 LC4256V-10FTN256AI 256 3.3 LC4256V-5FTN256BI 256 LC4256V-75FTN256BI LC4256V-10FTN256BI LC4512V-5FN256I LC4512V 1 Package 512 3.3 5 Lead-free fpBGA 256 208 I 1 LC4512V-75FN256I 512 3.3 7.5 Lead-free fpBGA 256 208 I LC4512V-10FN256I1 512 3.3 10 Lead-free fpBGA 256 208 I LC4512V-5TN176I 512 3.3 5 Lead-free TQFP 176 128 I LC4512V-75TN176I 512 3.3 7.5 Lead-free TQFP 176 128 I LC4512V-10TN176I 512 3.3 10 Lead-free TQFP 176 128 I 1. Use ftBGA package. fpBGA package devices have been discontinued via PCN#14A-07. 97 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet ispMACH 4000V (3.3V) Lead-Free Extended Temperature Devices Device LC4032V LC4064V LC4128V LC4256V Part Number Pin/Ball Count I/O Grade 48 32 E Lead-free TQFP 44 30 E Lead-free TQFP 100 64 E Lead-free TQFP 48 32 E Lead-free TQFP 44 30 E 7.5 Lead-free TQFP 144 96 E 7.5 Lead-free TQFP 128 92 E Macrocells Voltage tPD LC4032V-75TN48E 32 3.3 7.5 LC4032V-75TN44E 32 3.3 7.5 LC4064V-75TN100E 64 3.3 7.5 LC4064V-75TN48E 64 3.3 7.5 LC4064V-75TN44E 64 3.3 7.5 LC4128V-75TN144E 128 3.3 LC4128V-75TN128E 128 3.3 Package Lead-free TQFP LC4128V-75TN100E 128 3.3 7.5 Lead-free TQFP 100 64 E LC4256V-75TN176E 256 3.3 7.5 Lead-free TQFP 176 128 E LC4256V-75TN144E 256 3.3 7.5 Lead-free TQFP 144 96 E LC4256V-75TN100E 256 3.3 7.5 Lead-free TQFP 100 64 E For Further Information In addition to this data sheet, the following technical notes may be helpful when designing with the ispMACH 4000V/B/C/Z family: * TN1004, ispMACH 4000 Timing Model Design and Usage Guidelines * TN1005, Power Estimation in ispMACH 4000V/B/C/Z Devices Revision History Date Version -- -- Previous Lattice releases. Change Summary July 2003 17z Changed device status for LC4064ZC and LC4128ZC to production release and updated/added AC and DC parameters as well as ordering part numbers for LC4064ZC and LC4128ZC devices. Improved leakage current specifications for ispMACH 4000Z. For ispMACH 4000V/B/C IIL, IIH condition now includes 0V and 3.6V end points (0 VIN 3.6V). Added 132-ball chip scale BGA power supply and NC connections. Added 132-ball chip scale BGA logic signal connections for LC4064ZC, LC4128ZC and LC4256ZC devices. Added lead-free package designators. October 2003 18z Hot socketing characteristics footnote 1. has been enhanced; Insensitive to sequence of VCC or VCCO. However, assumes monotonic rise/fall rates for Vcc and Vcco, provided (VIN - VCCO) 3.6V. Improved LC4064ZC tS to 2.5ns, tST to 2.7ns and fMAX (Ext.) to 175MHz, LC4128ZC tCO to 3.5ns and fMAX (Ext.) to 161MHz (version v.2.1). Improved associated internal timing numbers and timing adders (version v.2.1). Added ispMACH 4000V/B/C/Z ORP Reference Tables. Enhanced ORP information in device pinout tables consistent with the ORP Combinations for I/O Blocks tables (table 6, 7, 8 and 9 in page 9-11). Corrected GLB/MC/Pad information in the 256-fpBGA pinouts for the LC4256V/B/C 160-I/O version. Added the ispMACH 4000 Family Speed Grade Offering table. Added the ispMACH 4128ZC Industrial and Automotive Device OPNs December 2003 19z Added the ispMACH 4032ZC and 4064ZC Industrial and Automotive Device OPNs 98 Lattice Semiconductor ispMACH 4000V/B/C/Z Family Data Sheet Revision History (Cont.) Date Version January 2004 20z Change Summary ispMACH 4000Z data sheet status changed from preliminary to final. Documents production release of the ispMACH 4256Z device. Added new feature - ispMACH 4000Z supports operation down to 1.6V. Added lead-free packaging ordering part numbers for the ispMACH 4000Z/C/V devices. April 2004 21z November 2004 22z Updated IPU (I/O Weak Pull-up Resistor Current) max. specification for the ispMACH 4000V/B/C; -150A to -200A. Added User Electronic Signature section. Added ispMACH 4000B (2.5V) Lead-Free Ordering Part Numbers. December 2004 22z.1 Updated Further Information section. February 2006 22z.2 Clarification to ispMACH 4000Z Input Leakage (IIH) specification. March 2007 22.3 Updated ispMACH 4000 Introduction section. June 2007 22.4 Updated Signal Descriptions table. Updated Features bullets to include reference to "LA" automotive data sheet under the "Broad Device Offering" bullet. Added footnote 1 to Part Number Description to reference the "LA" automotive data sheet. Changed device temperature references from `Automotive' to "Extended Temperature" for nonAEC-Q100 qualified devices. November 2007 23.0 Added 256-ftBGA package Ordering Part Number information per PCN#14A-07. May 2009 23.1 Correction to tCW, tGW, tWIR and fMAX parameters in ispMACH 4000Z External Switching Characteristics table. Correction to tCW, tGW, tWIR and fMAX parameters in ispMACH 4000V/B/C External Switching Characteristics table. 99