(888) IPD-CONVerters ● (888) 473-2668 ● www.ipdconverters.com
1
DESCRIPTION FEATURES
FC SERIES - 5A, 10A, 20A, FILTER
FC100 industry standard input filter modules provide up
to 30 dB of common mode and differential mode filtering
at 500 kHz. The FC100’s are available in 5A, 10A, and
20A versions and are optimized for operation with Power-
One’s high density, board-mounted products. The filters
can be operated with up to 100 VDC input and have
1000 VDC isolation.
Notes
† MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
• Meets Class B
Conducted Limits
• Optimized For
Power-One’s High
Density, Board-Mounted
Products
• PCB Mountable
• Common Mode and
Differential Mode
Filtering
• Industry Standard
Pinout
• -40°C to 100°C Case
Operation
• >30 dB Insertion Loss at
500 kHz
• 100 VDC Operation
TECHNICAL SPECIFICATIONS
Maximum Input Voltage 100 VDC
Line-to-Case Operation 1000 VDC
Input Frequency 100 Hz
Input
Isolation
Input - Case 1000 VDC
Case Temperature
Operating Range @ Iout Max. -40 to +60°C
Operating Range @ 70% Iout Max. -40 to +80°C
Storage Range -40 to +125°C
Humidity Max., Non-Condensing 95%
Vibration, 3 Axes, 5 Min Each 5 g, 10 - 55 Hz
MTBF† (Bellcore TR-NWT-000332) Consult Factory
Safety Consult Factory
General
Maximum Average Current
400 LFM Airflow Iout Max.
Natural Convection 70% Iout
Output
Rev. 05/01
2
-0.125"(-3.2mm)
0.750"(19.1mm)
0
5
43
2
1
(1.0mm)
DIA 0.040"
(11.2mm)
(50.8mm) 0.44"
(25.4mm)
2.00"
1.00"
BOTTOM VIEW
0
(-3.8mm)
-0.15" (12.1mm)
0.475" (43.2mm)
1.700"
MECHANICAL DRAWING
FC SERIES - 5A, 10A, 20A, FILTER
Pin Function
20A Module
1-V
in
2-V
in
3+V
in
4+V
in
5 Ground
6-V
out
7-V
out
8+V
out
9+V
out
Tolerances
Inches: (Millimeters)
.XX ± 0.020 .X ± 0.5
.XXX ± 0.010 .XX ± 0.25
Pin:
± 0.002 ± 0.05
(Dimensions as listed unless otherwise
specified.)
FC100V10A
FC100V5A FC100V20A
Pin Function
10A Module
1+V
in
2-V
in
3 Ground
4+V
out
5-V
out
Pin Function
5A Module
1+V
in
2 Ground
3-V
in
4+V
out
5-V
out
MODELS - (See the last page of Section C for options.)
-0.11"(-2.8mm)
0.780"(19.8mm)
0.390"(9.9mm)
0
5
4
3
2
1
(1.0mm)
DIA 0.040"
(10.2mm)
(25.4mm)
0.40"
(25.4mm)
1.00"
1.00"
BOTTOM VIEW
(-2.8mm)
-0.11"
0
(19.8mm)
0.780"
BOTTOM VIEW
(11.7mm)
0.46"
-0.15"(-3.8mm)
0.700"(17.8mm)
0.500"(12.7mm)
0.300"(7.6mm)
0.100"(2.5mm)
0.600"(15.2mm)
0.400"(10.2mm)
0.200"(5.1mm)
0
0.18"(4.6mm)
0.020"
(0.51mm)
9
8
7
4
3
26
5
1
(1.0mm)
DIA 0.040"
(52.1mm)
(41.9mm)
2.05"
1.65"
0
(-3.8mm)
-0.15" (17.8mm)
0.700" (43.2mm)
1.700"
Operating Current
(Amps)
Insertion Loss*
Differential Mode
(dB)
Insertion Loss*
Common Mode
(dB)
Typical
Resistance**
(mOhms)
Model
5
10
20
28
31
26
30
28
32
27
17
6.6
FC100V5A
FC100V10A
FC100V20A
* Typical loss at 500 kHz (50 Ohms)
** Resistance Per Leg
