2.0x1.25mm SMD CHIP LED LAMP Part Number: APHCM2012PBC/A-F01 Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 2.0X1.25mm SMT LED,0.5mm max. thickness. The Blue source color devices are made with InGaN z Low power consumption. on SiC Light Emitting Diode. z Wide viewing angle. Static electricity and surge damage the LEDS. z Ideal for backlight and indicator. It is recommended to use a wrist band or anti-electrostatic z Various colors and lens types available. glove when handling the LEDs. z Package : 2000pcs / reel. All devices, equipment and machinery must be electrically z Moisture sensitivity level : level 3. grounded. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3751 REV NO: V.2 DATE: MAR/25/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 1 OF 5 ERP: 1203004142 Selection Guide Part No. Dice APHCM2012PBC/A-F01 Lens Type Blue (InGaN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 18 60 110 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Blue D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH3751 REV NO: V.2 DATE: MAR/25/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 2 OF 5 ERP: 1203004142 Blue APHCM2012PBC/A-F01 SPEC NO: DSAH3751 REV NO: V.2 DATE: MAR/25/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 3 OF 5 ERP: 1203004142 APHCM2012PBC/A-F01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAH3751 REV NO: V.2 DATE: MAR/25/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 4 OF 5 ERP: 1203004142 PACKING & LABEL SPECIFICATIONS APHCM2012PBC/A-F01 SPEC NO: DSAH3751 REV NO: V.2 DATE: MAR/25/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 5 OF 5 ERP: 1203004142