Document 423 PoE Transformer For National Semiconductor LM5070 PoE Interface * Developed for the NSC LM5070 PD Interface in 13 W applications. * Operates at frequencies up to 1 MHz * Input: 36 - 72 V; Output: 3.3 V, 4.5 A, with secondary windings connected in parallel * Isolation:1500 Vrms from the primary and auxiliary windings to the secondary. Core material Ferrite Terminations RoHS tin-silver (96.5/3.5) over tin over nickel over phos bronze. Other terminations available at additional cost. Weight 12.4 g Ambient temperature -40C to +85C Storage temperature Component: -40C to +85C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Mean Time Between Failures (MTBF) / Failures in Time (FIT) 26,315,789 hours / 38 per billion hours, Calculated per Telcordia SR-322 Packaging 175 per 13 reel Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 11.9 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf Part number1 C1023-AL_ 4 L at 0 A2 L at Ipk3DCR max (Ohms) 10% (H) 10% (H) pri aux sec 110 99.0 0.139 0.656 Leakage L (H)5 0.016 1. When ordering, please specify a packaging code: C1023-ALD Packaging: D = 13 machine ready reel. EIA-481 embossed plastic tape (175 per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance is for the primary, measured at 10 kHz, 0.1 Vrms, 0 Adc. 3. Ipk is the peak current drawn at minimum input voltage. Dot indicates pin 1 1 12 0.130 3,30 6 1 : 0.69 1 0.050 1,27 Recommended Land Pattern 7 1.181 max 30,00 1 : 0.19 0.827 21,00 0.969 24,60 70 1.5 Isolation8 (Vrms) 1500 4 12 11 10 Pri Sec 6 9 8 7 1 0.118 3,0 0.118 3,0 Aux 3 Parts manufactured prior to December 2011 may be marked differently. Secondary windings to be connected in parallel on PC board. 0.450 max 11,43 0.080 2,03 Capacitance7 Ipk3 (pF) (A) 4. DCR for the secondary is per winding. 5. Leakage inductance is for the primary winding with all other pins shorted. 6. Turns ratio is with the secondary windings connected in parallel. 7. Capacitance measured between pins 3 and 4 with other pins shorted. 8. Isolation is measured from the primary and aux to the secondary. 9. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. 0.930 23,62 C1023-AL XXXXY 0.810 max 20,57 0.028 0,711 1.40 Turns ratio6 pri : sec pri : aux 0.004 /0,10 Dimensions are in inches mm US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 423 Revised 12/21/11 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: C1023-ALD C1023-ALB