Product data sheet
Characteristics
RE22R2HMR
Modular timing relay, 8 A, 0.05 s…300 h, 2 CO,
interval, 24...240 V AC/DC
Product availability : Non-Stock - Not normally stocked in distribution facility
Price* : 76.13 USD
Main
Range of product Zelio Time
Product or component type Modular timing relay
Discrete output type Relay
Device short name RE22
Nominal output current 8A
Complementary
Contacts type and composition 1 C/O timed contact, cadmium free
1 C/O timed or instantaneous contact, cadmium free
Time delay type H
Hw
Time delay range 1...10 s
3...30 h
10...100 s
30...300 s
0.05...1 s
3...30 min
0.3...3 s
3...30 s
30...300 min
30...300 h
Control type Rotary knob
Diagnostic button
Potentiometer external
[Us] rated supply voltage 24...240 V AC/DC 50/60 Hz
Release input voltage <= 2.4 V
Voltage range 0.85...1.1 Us
Supply frequency 50...60 Hz +/- 5 %
Connections - terminals Screw terminals, 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12) solid without cable end
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
*Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Feb 24, 2021
1
Screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end
Screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 14) flexible with cable end
Screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end
Tightening torque 5.31…8.85lbf.in (0.6…1N.m) IEC 60947-1
Housing material Self-extinguishing
Repeat accuracy +/- 0.5 % IEC 61812-1
Temperature drift +/- 0.05 %/°C
Voltage drift +/- 0.2 %/V
Setting accuracy of time delay +/- 10 % of full scale 25 °C IEC 61812-1
Control signal pulse width 100ms with load in parallel
30ms
Insulation resistance 100 MOhm 500V DC IEC 60664-1
Recovery time 120ms on de-energisation
Immunity to microbreaks 10ms
Power consumption in VA 3VA 240 V AC
Power consumption in W 1.5W 240 V DC
Switching capacity in VA 2000VA
Minimum switching current 10mA 5 V DC
Maximum switching current 8A
Maximum switching voltage 250V AC
Electrical durability 100000cycles, 8A at 250 V, AC-1
100000cycles, 2A at 24 V, DC-1
Mechanical durability 10000000cycles
Rated impulse withstand voltage 5kV 1.2…50µs IEC 60664-1
Power on delay 100ms
Creepage distance 4 kV/3 IEC 60664-1
Overvoltage category III IEC 60664-1
Safety reliability data B10d = 200000
MTTFd = 216.8 years
Mounting position Any position
Mounting support 35 mm DIN rail conforming to EN/IEC 60715
Status LED Green LED backlight steady)dial pointer indication
Yellow LED steady)output relay energised
Yellow LED fast flashing)timing in progress and output relay de-energised
Yellow LED slow flashing)timing in progress and output relay energised
Maximum Width 0.89in (22.5mm)
Net Weight 0.23lb(US) (0.105kg)
Environment
Dielectric strength 2.5kV 1 mA/1 minute 50 Hz between relay output and power supply basic insulation IEC 61812-1
Standards IEC 61812-1
UL 508
Directives 2006/95/EC - low voltage directive
2004/108/EC - electromagnetic compatibility
Product certifications RCM
CSA
CE
EAC
UL
CCC
GL
Ambient air temperature for operation -4…140°F (-20…60°C)
Ambient air temperature for storage -40…158°F (-40…70°C)
IP degree of protection Housing IP40 IEC 60529
Terminals IP20 IEC 60529
Front panel IP50 IEC 60529
Pollution degree 3 conforming to IEC 60664-1
Vibration resistance 20 m/s² 10…150Hz)IEC 60068-2-6
2
Shock resistance 15 gn not operating 11ms IEC 60068-2-27
5 gn in operation 11ms IEC 60068-2-27
Relative humidity 95% 77…131°F (25…55°C)
Electromagnetic compatibility Fast transients immunity test 1 kV capacitive connecting clip)level 3 IEC 61000-4-4
Surge immunity test 1 kV differential mode)level 3 IEC 61000-4-5
Surge immunity test 2 kV common mode)level 3 IEC 61000-4-5
Electrostatic discharge 6 kV contact discharge)level 3 IEC 61000-4-2
Electrostatic discharge 8 kV air discharge)level 3 IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test 10 V/m 80 MHz...1 GHz)level 3 IEC
61000-4-3
Conducted RF disturbances 10 V 0.15...80 MHz)level 3 IEC 61000-4-6
Fast transient bursts 2 kV direct contact)level 3 IEC 61000-4-4
Immunity to microbreaks and voltage drops 30 % 500 ms) IEC 61000-4-11
Immunity to microbreaks and voltage drops 100 % 20 ms) IEC 61000-4-11
Ordering and shipping details
Category 22376 - RELAYS-MEASUREMENT(RM4)
Discount Schedule CP2
GTIN 00785901502647
Nbr. of units in pkg. 1
Package weight(Lbs) 0.2lb(US) (0.09kg)
Returnability No
Country of origin ID
Packing Units
Package 1 Height 0.260dm
Package 1 width 0.820dm
Package 1 Length 0.950dm
Offer Sustainability
Sustainable offer status Green Premium product
California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which
is known to the State of California to cause cancer and birth defects or other reproductive harm. For
more information go to www.P65Warnings.ca.gov
REACh Regulation REACh Declaration
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Environmental Disclosure Product Environmental Profile
Circularity Profile End of Life Information
3
Product data sheet
Dimensions Drawings
RE22R2HMR
Dimensions
4
Product data sheet
Connections and Schema
RE22R2HMR
Wiring Diagram
5
Product data sheet
Technical Description
RE22R2HMR
Function H: Interval Relay
Description
On energisation of power supply, output(s) R close(s) and timing period T starts.At the end of the timing period T, the output(s) R revert(s) to its/
their initial state.The second output (R2) can be either timed (when set to "TIMED") or instantaneous (when set to "INST").
Function: 1 Output
Function: 2 Outputs
6
Product data sheet
Technical Description
RE22R2HMR
Function Hw: Interval Relay & with Retrigger / Restart Control
Description
On energisation of power supply, output(s) R close(s) and timing period T starts.At the end of the timing period T, the output(s) R revert(s) to
its/their initial state.At any state of the output(s) R when Y1 energizes followed by deenergizes, the output(s) R close(s) then restarts the same
operation as described at the beginning.The second output (R2) can be either timed (when set to "TIMED") or instantaneous (when set to
"INST").
Function: 1 Output
Function: 2 Outputs
Legend
Relay de-energised
Relay energised
Output open
Output closed
U - Supply
T - Timing period
R1/R2 - 2 timed outputs
R2 inst. - The second output is instantaneous if the right position is selected
Y1 - Retrigger / Restart control
7