RE22R2HMR Product data sheet Characteristics Modular timing relay, 8 A, 0.05 s...300 h, 2 CO, interval, 24...240 V AC/DC Product availability : Non-Stock - Not normally stocked in distribution facility Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Price* : 76.13 USD Main Range of product Zelio Time Product or component type Modular timing relay Discrete output type Relay Device short name RE22 Nominal output current 8A Complementary Contacts type and composition 1 C/O timed contact, cadmium free 1 C/O timed or instantaneous contact, cadmium free Time delay type H Hw Time delay range 1...10 s 3...30 h 10...100 s 30...300 s 0.05...1 s 3...30 min 0.3...3 s 3...30 s 30...300 min 30...300 h Control type Rotary knob Diagnostic button Potentiometer external [Us] rated supply voltage 24...240 V AC/DC 50/60 Hz Release input voltage <= 2.4 V Voltage range 0.85...1.1 Us Supply frequency 50...60 Hz +/- 5 % Connections - terminals Screw terminals, 1 x 0.5...1 x 3.3 mm AWG 20...AWG 12) solid without cable end *Price is "List Price" and may be subject to a trade discount - check with your local distributor or retailer for actual price. Feb 24, 2021 1 Screw terminals, 2 x 0.5...2 x 2.5 mm AWG 20...AWG 14) solid without cable end Screw terminals, 1 x 0.2...1 x 2.5 mm AWG 24...AWG 14) flexible with cable end Screw terminals, 2 x 0.2...2 x 1.5 mm AWG 24...AWG 16) flexible with cable end Tightening torque 5.31...8.85lbf.in (0.6...1N.m) IEC 60947-1 Housing material Self-extinguishing Repeat accuracy +/- 0.5 % IEC 61812-1 Temperature drift +/- 0.05 %/C Voltage drift +/- 0.2 %/V Setting accuracy of time delay +/- 10 % of full scale 25 C IEC 61812-1 Control signal pulse width 100ms with load in parallel 30ms Insulation resistance 100 MOhm 500V DC IEC 60664-1 Recovery time 120ms on de-energisation Immunity to microbreaks 10ms Power consumption in VA 3VA 240 V AC Power consumption in W 1.5W 240 V DC Switching capacity in VA 2000VA Minimum switching current 10mA 5 V DC Maximum switching current 8A Maximum switching voltage 250V AC Electrical durability 100000cycles, 8A at 250 V, AC-1 100000cycles, 2A at 24 V, DC-1 Mechanical durability 10000000cycles Rated impulse withstand voltage 5kV 1.2...50s IEC 60664-1 Power on delay 100ms Creepage distance 4 kV/3 IEC 60664-1 Overvoltage category III IEC 60664-1 Safety reliability data B10d = 200000 MTTFd = 216.8 years Mounting position Any position Mounting support 35 mm DIN rail conforming to EN/IEC 60715 Status LED Green LED backlight steady)dial pointer indication Yellow LED steady)output relay energised Yellow LED fast flashing)timing in progress and output relay de-energised Yellow LED slow flashing)timing in progress and output relay energised Maximum Width 0.89in (22.5mm) Net Weight 0.23lb(US) (0.105kg) Environment Dielectric strength 2.5kV 1 mA/1 minute 50 Hz between relay output and power supply basic insulation IEC 61812-1 Standards IEC 61812-1 UL 508 Directives 2006/95/EC - low voltage directive 2004/108/EC - electromagnetic compatibility Product certifications RCM CSA CE EAC UL CCC GL Ambient air temperature for operation -4...140F (-20...60C) Ambient air temperature for storage -40...158F (-40...70C) IP degree of protection Housing IP40 IEC 60529 Terminals IP20 IEC 60529 Front panel IP50 IEC 60529 Pollution degree 3 conforming to IEC 60664-1 Vibration resistance 20 m/s 10...150Hz)IEC 60068-2-6 2 Shock resistance 15 gn not operating 11ms IEC 60068-2-27 5 gn in operation 11ms IEC 60068-2-27 Relative humidity 95% 77...131F (25...55C) Electromagnetic compatibility Fast transients immunity test 1 kV capacitive connecting clip)level 3 IEC 61000-4-4 Surge immunity test 1 kV differential mode)level 3 IEC 61000-4-5 Surge immunity test 2 kV common mode)level 3 IEC 61000-4-5 Electrostatic discharge 6 kV contact discharge)level 3 IEC 61000-4-2 Electrostatic discharge 8 kV air discharge)level 3 IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test 10 V/m 80 MHz...1 GHz)level 3 IEC 61000-4-3 Conducted RF disturbances 10 V 0.15...80 MHz)level 3 IEC 61000-4-6 Fast transient bursts 2 kV direct contact)level 3 IEC 61000-4-4 Immunity to microbreaks and voltage drops 30 % 500 ms) IEC 61000-4-11 Immunity to microbreaks and voltage drops 100 % 20 ms) IEC 61000-4-11 Ordering and shipping details Category 22376 - RELAYS-MEASUREMENT(RM4) Discount Schedule CP2 GTIN 00785901502647 Nbr. of units in pkg. 1 Package weight(Lbs) 0.2lb(US) (0.09kg) Returnability No Country of origin ID Packing Units Package 1 Height 0.260dm Package 1 width 0.820dm Package 1 Length 0.950dm Offer Sustainability Sustainable offer status Green Premium product California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov REACh Regulation REACh Declaration EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information 3 Product data sheet Dimensions Drawings Dimensions 4 RE22R2HMR Product data sheet Connections and Schema RE22R2HMR Wiring Diagram 5 Product data sheet Technical Description RE22R2HMR Function H: Interval Relay Description On energisation of power supply, output(s) R close(s) and timing period T starts.At the end of the timing period T, the output(s) R revert(s) to its/ their initial state.The second output (R2) can be either timed (when set to "TIMED") or instantaneous (when set to "INST"). Function: 1 Output Function: 2 Outputs 6 Product data sheet Technical Description RE22R2HMR Function Hw: Interval Relay & with Retrigger / Restart Control Description On energisation of power supply, output(s) R close(s) and timing period T starts.At the end of the timing period T, the output(s) R revert(s) to its/their initial state.At any state of the output(s) R when Y1 energizes followed by deenergizes, the output(s) R close(s) then restarts the same operation as described at the beginning.The second output (R2) can be either timed (when set to "TIMED") or instantaneous (when set to "INST"). Function: 1 Output Function: 2 Outputs Legend Relay de-energised Relay energised Output open Output closed U- Supply T- Timing period R1/R2 - 2 timed outputs R2 inst. - The second output is instantaneous if the right position is selected Y1 - Retrigger / Restart control 7