35-Gray-1/2 - 3M Electronic Specialty

Vinyl Electrical Tape 35

Data Sheet July 2011

Description

Scotch® Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) color-

coding tape. Outstanding electri cal a nd mechanical properties make this tape excellent

for use in phase identification, color coding of motor leads and piping systems, and for

marking safety areas. Scot ch® Tape 35 operates over a wide range of temperatures –

up to 221°F (105°C); applies smoothly and conforms well above 3 2°F (0 °C). This tape is

available in nine fade resistant colo rs.

Agency

Approvals & Self

Certifications

UL Listed - UL 510 Standard “Insulating Tape” (product category OANZ), File E129200;

meets UL 510 labeling for “flame-retardant” for vinyl electrical tape.

CSA Certification; Standard. C22.2 No. 197-M1983 “PVC Insulating Tape,” File LR

48769.

RoHS 2002/95/EC

RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the

substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by

Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under RoHS. This

information represents 3M’s knowledge and belief, which may be based in whole or in part on information

provided by third party suppliers to 3M.

Applications

 Color coding for phase ide ntification, job identification and safety

 Insulating electrical wiring

 Protecting electrical conductors, moto r leads and piping from moisture, alkalis, acids,

corrosion, abrasion and we ather

Installation

 Apply in half-lapped layers with sufficient tension to conform and produce a uniform

covering. In most applications, this tensi on will reduce the tape width to approximately

60% of its original wi dth.

 On a pigtail splice, wrap th e tape beyond the end of the wire and then fold back and

over-wrap, leaving a protective cushion to resist cut-through.

 Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the

tape with no tension on the last wrap to prevent flaggi ng.

Specifications

Scotch® Tape 35 is based on polyvinyl chloride (PVC) and/or its copolymers and has a

rubber-based, pressu re-sensitive adhesive. The tape shall be 7 mils thick, and be UL

Listed and marked per UL Standard 510 as “Flame-Retardant.” The tape shall be

compatible with synthetic cable insulations, jackets and splicing compounds. The tape

will remain stable and will not telescope more than 0.1 inches when maintained at

temperatures below 122°F (50°C).

1 of 2 3

Scotch® Vinyl Electrical Tape 35

2 of 2

Typical

Properties

Not for specifications. Values are typical, not to be considered minimum or maxi mum.

Properties measured at room temperature 73°F (23°C) unless otherwise stated .

Physical Property

(ASTM D1000, unless n oted) Typical Value

US units (metric)

Color(s) Blue, Brown, Gray, Green, Orange, Red,

Violet, White, Yellow

Adhesive Pressure-sensitive rubber

Thickness 7 mils (0,178 mm)

Continuous Operating Temperature (max) 221ºF (105ºC)

Breaking Strength 17 lb/in (30,3 N/10 mm)

Elongation (% at break) 225%

Adhesion to Steel 20 oz/in (2,2 N/10 mm)

Adhesion to Backing 20 oz/in (2,2 N/10 mm)

Flagging 0.1 in (2,5 mm)

Electrical Property

(ASTM D1000, unless n oted) Typical Value

US units (metric)

Voltage Rating (UL 510) 600 volts

Dielectric Breakdow n

Standard condition

Wet Condition (96 hrs @ 73.4ºF (23ºC)

8,750 volts*

7875 volts

*Note: Dielectri c s tre ngth 1250 V/mil

High Humidity Insulation Resistance > 1x 106 megohms

Shelf Life &

Storage

Scotch® Vinyl Electrical Tape 35 has a 5-year shelf life from date of manufacture when

stored in a humidity controlled storage (1 0°C/50°F to 27°C/80°F and <75% relative

humidity).

Availability

Please contact your local distributor; av ailable from 3M.com/electrical [Where to Buy] or

call 1.800.245.3573.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to

be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and

determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any

statements related to the product, which are not contained in 3M’s current publications, or any contrary statements

contained on your purchase order, shall have no force or effect unless expressly agreed upon, in writing, by an authorized

officer of 3M.

Warranty; Limited

Remedy; Limited

Liability

This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER

WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your

exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M

product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential

loss or damage arising from this 3M product, regardless of the legal theory asserted.

Scotch is a registered trademark of 3M Company.

Electrical Markets Division

6801 River Place Boulevard

Austin, TX 78726-9000

800-245-3573

Fax: 800.245.0329

www.3M.com/electrical

Please recycle

78-8124-4858-3 E

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

3M:

#35 1/2X20 WHITE 35 GREEN (1/2 X 20') 35-Brown-1/2 35-Gray-1/2 35-Multi-Color 35-Orange-1/2 35-VIOLET

(3/4"X66') 35 YELLOW (3/4" X 66') 35 RED (3/4" X 66') 35 WHITE (3/4" X 66') 35 ORANGE 35VIOLET(1/2"X20') 35

RED (1/2" X 20') 35 BROWN (3/4"X66') 35 GRAY 35 GREEN (3/4" X 66') 35 BLUE (3/4" X 66')