P593.A (5/03)
For More Information :
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners.
Printed on recycled paper. ©2003, Pulse Engineering, Inc.
UNITED STATES
(Worldwide)
12220 World Trade Drive
San Diego, CA 92128
U.S.A.
http://www.pulseeng.com
TEL: 858 674 8100
FAX: 858 674 8262
UNITED KINGDOM
(Northern Europe)
1 & 2 Huxley Road
The Surrey Research Park
Guildford, Surrey GU2 5RE
United Kingdom
TEL: 44 1483 401700
FAX: 44 1483 401701
FRANCE
(Southern Europe)
Zone Industrielle
F-39270
Orgelet
France
TEL: 33 3 84 35 04 04
FAX: 33 3 84 25 46 41
TAIWAN, R.O.C.
(Northern Asia)
3F-4, No. 81, Sec. 1
HsinTai Wu Road
Hsi-Chih, Taipei Hsien
Taiwan, R.O.C.
Tel: 886 2 2698 0228
FAX: 886 2 2698 0948
SINGAPORE
(Southern Asia)
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
TEL: 65 6287 8998
FAX: 65 6280 0080
HONG KONG
(China/Hong Kong)
9/F, Phase 2, Tai Sang
Shatin Warehouse Centre
6 Wong Chuk Yeung Street
Fotan, Shatin, Hong Kong
TEL: 852 2788 6588
FAX: 852 2776 1055
DISTRIBUTOR
2
4
3
PIN 1
LEVEL OF
ENCAPSULANT
COIL
4
2
1
3
500 kHz COMMON MODE
EMI INDUCTORS
NOTES
:1. Leads have .031/.039 diameter.
.700/.900
2.Self-leaded: 96187 has .036 nom. diameter leads.
96188 & 96189 have .045 nom. diameter leads.
96190 has .051 nom. diameter leads.
Elect. Specs. @ 25°C— Operating Temp. -40° to +130° C
.650
16,51(MAX)
3
1
24
Part Rated RMS Inductance DCR Case Leakage
Number Current mH (ΩMAX) Style Inductance
(A.Normal) (± 30%) (MIN/MAX µH)
PE-96161 0.5 33 1.40 3 160/320
PE-96165 1.0 18 0.50 1 120/320
PE-96166 1.0 5.6 0.30 3 30/60
PE-96168 2.0 15 0.29 1 100/220
PE-96173 3.15 5.6 0.10 1 40/80
PE-96175 3.15 3.3 0.07 3 15/35
PE-96177 3.15 2.2 0.06 3 10/20
PE-96178 3.15 1.2 0.04 3 6/15
PE-96179 3.15 1.2 0.04 4 5/14
PE-96181 5.0 3.9 0.06 1 25/60
PE-96186 6.3 2.7 0.04 1 20/45
PE-96187 8.0 3.3 0.033 2 20/45
PE-96188 10.0 1.8 0.02 2 10/25
PE-96189 12.5 1.5 0.015 2 10/20
PE-96190 15.0 1.0 0.01 2 7/15
3
4
2
PIN 1
LEVEL OF
ENCAPSULANT
4
3
1
2
3
4
2
PIN 1
LEVEL OF
ENCAPSULANT
4
3
1
2
3
4
2
PIN 1
LEVEL OF
ENCAPSULANT
4
3
1
2
CASE 11CASE 22
CASE 31CASE 41
.240/.270
6,10/6,86
1.07
27,18 (MAX) .615
15,60(MAX)
1.10
27,90(MAX)
1.34
34,04
.720
18,29 (MAX)
1.30
33,00(MAX)
1.70
43,18(MAX)
.910
23,10(MAX)
.900 ± .008
22,86 ±0,20
.800 ± .008
20,30 ± 0,20
1.00 ± .008
25,40 ± 0,20
.600 ± .008
15,20 ± 0,20
.500 ±.008
12,70 ±0,20
1.00 ±.008
25,40 ±0,20
.750 ± .008
19,05 ± 0,20
.158/.197
4,00/5,00
.158/.197
4,01/5,00 .197/.237
5,00/6,02
1.03
26,16
.039
0,99
.500 ± .008
12,70 ± 0,20
1.10
28,00 (MAX)
Common mode EMI Inductors
Designed for higher frequency power conversion
For use in SMPS input filtering circuits
Schematic
Mechanicals
Unless otherwise specified, all tolerances are ± .010
0,25
Dimensions: Inches
mm
