Reflexlichtschranke Reflective Interrupter Lead (Pb) Free Product - RoHS Compliant SFH 9202 Wesentliche Merkmale Features * Optimaler Arbeitsabstand 1 mm bis 5 mm * IR-GaAs-Lumineszenzdiode in Kombination mit einem Si-NPN-Fototransistor * Tageslichtsperrfilter * Geringe Sattigungsspannung * Sender und Empfanger galvanisch getrennt * Vorbehandlung nach JEDEC Level 4 * Optimal operating distance 1 mm to 5 mm * IR-GaAs-emitter in combination with a Silicon NPN phototransistor * Daylight cut-off filter * Low saturation voltage * Emitter and detector electrically isolated * Preconditioning acc. to JEDEC Level 4 Anwendungen Applications * * * * * * * * Positionsmelder Endabschalter Drehzahluberwachung Bewegungssensor Position reporting End position switch Speed monitoring Motion transmitter Typ Type Bestellnummer Ordering Code ICE [mA] (IF = 10 mA, VCE = 5 V, d = 1 mm) SFH 9202 Q65110A2712 0.063 ... 0.8 SFH 9202-2/3 Q65110A2705 0.063 ... 0.2 SFH 9202-3/4 Q65110A2710 0.10 ... 0.32 SFH 9202-4/5 Q65110A2709 0.16 ... 0.50 SFH 9202-5/6 Q65110A2711 0.25 ... 0.80 2007-04-03 1 SFH 9202 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Sperrspannung Reverse voltage VR 5 V Vorwartsgleichstrom Forward current IF 50 mA Verlustleistung Power dissipation Ptot 80 mW Dauer-Kollektor-Emitter-Sperrspannung Continuous collector-emitter voltage VCE 16 V Kollektor-Emitter-Sperrspannung, (t 1 min) Collector-emitter voltage, (t 1 min) VCE 30 Emitter-Kollektor-Sperrspannung Emitter-collector voltage VEC 7 Kollektorstrom Collector current IC 10 mA Verlustleistung Total power dissipation Ptot 100 mW Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Umgebungstemperatur Ambient temperature range TA - 40 ... + 100 Verlustleistung Power dissipation Ptot 150 mW Elektrostatische Entladung Electrostatic discharge ESD 2 KV Umweltbedingungen / Environment conditions 3 K3 acc. to EN 60721-3-3 (IEC 721-3-3) Sender (GaAs-Diode) Emitter (GaAs diode) Empfanger (Si-Fototransistor) Detector (silicon phototransistor) Reflexlichtschranke Light Reflection Switch 2007-04-03 2 SFH 9202 Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Durchlaspannung Forward voltage IF = 50 mA VF 1.25 ( 1.65) V Sperrstrom Reverse current VR = 5 V IR 0.01 ( 1) A Kapazitat Capacitance VR = 0 V, f = 1 MHz CO 25 pF Warmewiderstand1) Thermal resistance1) RthJA 270 K/W Kapazitat Capacitance VCE = 5 V, f = 1 MHz CCE 5 pF Kollektor-Emitter-Reststrom Collector-emitter leakage current VCE = 20 V ICEO 1 ( 50) nA Fotostrom (Fremdlichtempfindlichkeit) Photocurrent (outside light density) VCE = 5 V, Ev = 1000 Lx IP 1 mA Warmewiderstand1) Thermal resistance1) RthJA 270 K/W Sender (GaAs-Diode) Emitter (GaAs diode) Empfanger (Si-Fototransistor) Detector (silicon phototransistor) 2007-04-03 3 SFH 9202 Kennwerte (TA = 25 C) Characteristics (cont'd) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Kollektor-Emitterstrom Collector-emitter current Kodak neutral white test card, 90% Reflexion IF = 10 mA; VCE = 5 V; d = 1 mm ICE min. ICE max 63 800 A A Kollektor-Emitter-Sattigungsspannung Collector-emitter saturation voltage Kodak neutral white test card, 90% Reflexion IF = 10 mA; d = 1 mm; IC = 20 A VCE sat 0.15 ( 0.6) V Reflexlichtschranke Light Reflection Switch 1) Montage auf PC-Board mit > 5 mm2 Padgroe 1) Mounting on pcb with > 5 mm2 pad size d Reflector with 90% reflexion (Kodak neutral white test card) OHM02257 2007-04-03 4 SFH 9202 Schaltzeiten (TA = 25 C, VCC = 5 V, IC = 100 A1), RL = 1 k) Switching Times F RL C VCC Output OHM02258 Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Einschaltzeit Turn-on time tein ton 40 s Anstiegzeit Rise time tr 30 s Ausschaltzeit Turn-off time taus toff 45 s Abfallzeit Fall time tf 40 s 1) IC eingestellt uber den Durchlastrom der Sendediode, den Reflexionsgrad und den Abstand des Reflektors vom Bauteil (d) 1) IC as a function of the forward current of the emitting diode, the degree of reflection and the distance between reflector and component (d) 2007-04-03 5 SFH 9202 Collector Current C I I Cmax C - = f(d) ------------- Permissible Power Dissipation for Diode and Transistor Ptot = f (TA ) OHO02255 100 C max % Switching Characteristics t = f (RL) TA = 25 C, IF = 10 mA OHO01367 10 3 OHL00945 160 mW Total power dissipation t Ptot s t on t off 80 120 Detector 100 60 Emitter 80 40 10 2 60 40 20 Kodak neutral white test card 20 Mirror 0 0 0 1 2 3 4 mm 5 d Max. Permissible Forward Current IF = f (TA) IF 40 60 80 C 100 Transistor Capacitance (typ.) CCE = f (VCE), TA = 25 C, f = 1 MHz OHO00496 20 C CE 100 20 10 1 0 10 k RL 10 1 TA OHL00986 120 mA 0 pF 10 2 Collector Current IC = f (IF), spacing d to reflector = 1 mm, 90% reflection OHO01324 300 C A 15 80 200 60 10 40 100 VCE = 5 V 5 20 0 0 20 40 60 80 C 100 TA Forward Voltage (typ.) of the Diode VF = f (T) OHO02256 1.30 VF V 0 -2 10 10 -1 10 0 10 1 V 10 2 V CE Relative Spectral Emission of Emitter (GaAs) Irel = f () and Detector (Si) Srel = f () OHO00786 100 rel S rel % 0 0 4 8 12 16 mA 20 F Output Characteristics (typ.) IC = f (VCE), spacing to reflector: d = 1 mm, 90% reflection, TA = 25 C 0.6 C mA OHO01326 F = 25 mA 0.5 1.25 80 F = 20 mA F = 20 mA 10 mA 1.20 0.4 60 5 mA F = 15 mA 0.3 1.15 Detector 40 0.2 1.10 20 1.05 0.1 Emitter 1 -40 -20 2007-04-03 0 20 40 60 C T 100 0 700 800 900 1000 nm 1100 6 0 0.1 F = 10 mA F = 5 mA 10 0 10 1 V VCE SFH 9202 Perm. Pulse Handling Capability IF = f (tp), Duty cycle D = parameter, TA = 25 C IF Perm. Pulse Handling Capability IF = f (tp), Duty cycle D = parameter, TA = 85 C OHF02623 104 mA t D = TP tP IF 0.2 t D = TP T D= 103 IF OHF02622 104 mA IF T D= 103 0.005 0.01 0.02 0.05 0.1 tP 0.005 0.01 0.02 0.05 0.1 0.2 102 0.5 102 0.5 1 1 101 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 101 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2007-04-03 7 SFH 9202 Mazeichnung Package Outlines 6.2 (0.244) (0.4 (0.016) typ.) 6 1 2 3 5 0...0.1 (0...0.004) B 2.1 (0.083) 1.7 (0.067) (0.05 (0.002) typ.) 3.8 (0.150) 2.54 (0.100) Raster (spacing) (1.2 (0.047) typ.) 0.5 (0.020) 0.3 (0.012) Sender/Emitter 4.2 (0.165) 1.27 (0.050) Raster (spacing) A (0.1 (0.004) typ.) 5.8 (0.228) 3.4 (0.134) 3.0 (0.118) (5) 0.15 (0.006) 0.13 (0.005) 0.2 M A 4 Chip Positionen 0.1 M B Empfanger/Receiver GPLY0504 Type 1 2 3 4 5 6 SFH 9202 Anode - Emitter Collector - Cathode Mae in mm (inch) / Dimensions in mm (inch). 2007-04-03 8 SFH 9202 0.6 (0.024) Reflow Loten Reflow Soldering 1.2 (0.047) 1.27 (0.050) 1.27 (0.050) Empfohlenes Lotpaddesign Recommended Solder Pad Padgeometrie fur verbesserte Warmeableitung Paddesign for improved Heat dissipation 3.9 (0.154) Cu-Flache >5 mm 2 Cu-area >5 mm 2 Lotstopplack Solder resist Mae in mm (inch) / Dimensions in mm (inch). 2007-04-03 9 OHPY0030 SFH 9202 Lothinweise Soldering Conditions Bauform Type SFH 9202 Drypack Level acc. to IPS-stand. 020 Tauch-, Schwalllotung Dip, Wave Soldering Reflowlotung Reflow Soldering Peak Temp. Max. Time in Peak Temp. Max. Time (solderbath) peak zone (package in Peak temp.) Zone 4 n. a. 260 C - Lotbedingungen Soldering Conditions Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering Kolbenlotung Iron Soldering 20 sec. (Iron temp.) n.a. Vorbehandlung nach JEDEC Level 4 Preconditioning acc. to JEDEC Level 4 (nach J-STD-020C) (acc. to J-STD-020C) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C 255 C 240 C T 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 t 2007-04-03 10 s 300 SFH 9202 Gurtung / Polaritat und Lage siehe Dokument: Short Form Katalog: Gurtung und Verpackung - SMT-Bauelemente - Gehause:SMT RLS Methode of Taping / Polarity and Orientation see document: Short Form Catalog: Tape and Reel SMT-Components - Package: SMT-RLS Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2007-04-03 11