JPVL54I32M-77.76MHZ - Connor-Winfield Corporation (The)

THE CONNOR-WINFIELD CORP.

2111 COMPREHENSIVE DRIVE.

AURORA, IL 60505.

FAX (630) 851-5040.

PHONE (630) 851-4722. PRODUCT DATA SHEET

Specifications subject to change without notice.

DATA SHEET #: REV: DATE:

CRYSTAL CONTROLLED OSCILLATORS

The Connor-Winfield

JPVL54I32M is a 3.3V

Voltage Controlled Crystal

Oscillator (VCXO) with

Differential PECL outputs.

Based on a fundamental strip

crystal design the

JPVL54I32M is designed for

phased lock loop applications

requiring low jitter and tight

stability.

1 2

JPVL54I32M - 155.52MHz

VCXO

SERIES CENTER

FREQUENCY

FEATURES

DESCRIPTION

ORDERING INFORMATION

IMPROVED MICROPHONIC DESIGN

3.3V OPERATION

LOW JITTER <1pS RMS

TOTAL FREQUENCY STABILITY: ±20ppm

TEMPERATURE RANGE: 0 to 70°C

DIFFERENTIAL PECL OUTPUTS

TAPE AND REEL PACKAGING

SURFACE MOUNT 14 PIN 3.3V PECL VCXO

JPVL54I32M

Vx488 00 9/15/03

www.conwin.com

CW 0107

JPVL54I32M

155.52M

ABSOLUTE MAXIMUM RATINGS TABLE 1.0

PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE

Storage Temperature -40 - 85 °C

Supply Voltage (Vcc) -0.5 - 7.0 Vdc

Control Voltage (Vc) -0.5 - 7.0 Vdc

OPERATING SPECIFICATIONS TABLE 2.0

PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE

Center Frequency (Fo) 77.76 - 166.6285 MHz

Frequency Stability vs. Temperature -15 - 15 ppm 1

Frequency vs. Aging (10 years) -5 5 ppm

Total Frequency Tolerance -20 - 20 ppm 2

Operating Temperature Range -0 - 70 °C

Supply Voltage (Vcc) 3.135 3.3 3.465 Vdc

Supply Current (Icc) - - 80 mA

Jitter (BW=10Hz to 20MHz) - - 5 ps rms

Jitter (BW=12kHz to 20MHz) - - 1 ps rms

SSB Phase Noise at 100Hz offset - -80 - dBc/Hz

SSB Phase Noise at 1KHz offset - -100 - dBc/Hz

SSB Phase Noise at 10KHz offset - -130 - dBc/Hz

SSB Phase Noise at 100KHz offset - -135 - dBc/Hz

INPUT CHARACTERISTICS TABLE 3.0

PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE

Control Voltage Range (Vc) 0.3 1.65 3.0 Vdc

Frequency at Vc=0.3Vdc -100 - -52 ppm 3

Frequency at Vc=3.0Vdc 52 - 100 ppm 3

Absolute Pull Range (APR) +/-32 - - ppm 4

Monotonic Linearity - - 10 %

Input Impedance - 50K - Ohm

Modulation Bandwidth (3dB cutoff frequency) 10 - - KHz

LVPECL OUTPUT CHARACTERISTICS TABLE 4.0

PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE

LOAD - - 50 Ohms 5

Voltage (High) (Voh) 2.275 - - Vdc

(Low) (Vol) - - 1.68 Vdc

Duty Cycle measured @ 50% Level 45 50 55 %

Rise / Fall Time measured @ 20% to 80% - - 1.0 nS

PACKAGE CHARACTERISTICS TABLE 5.0

Package Hermetically sealed metal 14-pin package.

Notes

1.0 Control Voltage = 1.65V

2.0 Includes calibration, Frequency vs. temperature, supply and load variations, shock, vibration and aging over 10 years. Vc

= 1.65V.

3.0 Referenced to Fo at 25°C, Vc = 1.65V, Positive Slope.

4.0 Absolute pull range (APR) is the minimum and maximum guaranteed pull range of the VCXO under all conditions over

lifetime operation. The APR is referenced to Fo.

5.0 Output terminated into 50 ohms into Vcc – 2.0Vdc or Thevenin equivalent.