THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS SURFACE MOUNT 14 PIN 3.3V PECL VCXO ABSOLUTE MAXIMUM RATINGS PARAMETER CW 0107 JPVL54I32M 155.52M TABLE 1.0 UNITS MINIMUM NOMINAL MAXIMUM UNITS -40 - 85 C Storage Temperature NOTE Supply Voltage (Vcc) -0.5 - 7.0 Vdc Control Voltage (Vc) -0.5 - 7.0 Vdc NOMINAL - MAXIMUM 166.6285 UNITS MHz NOTE (Fo) MINIMUM 77.76 -15 -5 -20 -0 - ppm ppm ppm C 1 - 15 5 20 70 Vdc OPERATING SPECIFICATIONS JPVL54I32M TABLE 2.0 PARAMETER Center Frequency Frequency Stability vs. Temperature Frequency vs. Aging (10 years) Total Frequency Tolerance Operating Temperature Range Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - - 80 mA Jitter (BW=10Hz to 20MHz) - - 5 ps rms Jitter (BW=12kHz to 20MHz) SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset - -80 -100 -130 -135 1 - ps rms dBc/Hz dBc/Hz dBc/Hz dBc/Hz MINIMUM 0.3 -100 52 +/-32 - NOMINAL 1.65 50K MAXIMUM 3.0 -52 100 10 - UNITS Vdc ppm ppm ppm % Ohm 10 - - KHz INPUT CHARACTERISTICS 2 DESCRIPTION The Connor-Winfield JPVL54I32M is a 3.3V Voltage Controlled Crystal Oscillator (VCXO) with Differential PECL outputs. Based on a fundamental strip crystal design the JPVL54I32M is designed for phased lock loop applications requiring low jitter and tight stability. TABLE 3.0 PARAMETER Control Voltage Range Frequency at Vc=0.3Vdc Frequency at Vc=3.0Vdc Absolute Pull Range (APR) Monotonic Linearity Input Impedance (Vc) Modulation Bandwidth (3dB cutoff frequency) NOTE 3 3 4 FEATURES IMPROVED MICROPHONIC DESIGN 3.3V OPERATION LOW JITTER <1pS RMS LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle measured @ 50% Level Rise / Fall Time measured @ 20% to 80% (Voh) (Vol) TABLE 4.0 MINIMUM 2.275 45 - NOMINAL 50 - MAXIMUM 50 1.68 55 1.0 UNITS Ohms Vdc Vdc % nS PACKAGE CHARACTERISTICS 3.0 4.0 5.0 TOTAL FREQUENCY STABILITY: 20ppm TEMPERATURE RANGE: 0 to 70C DIFFERENTIAL PECL OUTPUTS TAPE AND REEL PACKAGING TABLE 5.0 Package Notes 1.0 2.0 NOTE 5 Hermetically sealed metal 14 -pin package. Control Voltage = 1.65V Includes calibration, Frequency vs. temperature, supply and load variations, shock, vibration and aging over 10 years. Vc = 1.65V. Referenced to Fo at 25C, Vc = 1.65V, Positive Slope. Absolute pull range (APR) is the minimum and m aximum guaranteed pull range of the VCXO under all conditions over lifetime operation. The APR is referenced to Fo. Output terminated into 50 ohms into Vcc - 2.0Vdc or Thevenin equivalent. ORDERING INFORMATION JPVL54I32M - 155.52MHz VCXO SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Vx488 PAGE 1 OF 2 REV: 00 DATE: 9/15/03 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS 5.08 Dimensional Tolerance: .005 (.127mm) Specifications subject to change without notice. DATA SHEET #: Vx488 PAGE 2 OF 2 REV: 00 DATE: 9/15/03 aCopyright 2001 Connor-Winfield all rights reserved.