RECEIVER NR3312 Series InGaAs PIN-PD RECEIVER WITH INTERNAL PRE-AMPLIFIER FOR 10 Gb/s APPLICATIONS DESCRIPTION The NR3312 Series products consist of InGaAs PIN ROSAs (Receiver Optical Sub-Assembly) with internal pre-amplifiers designed for 10 Gb/s optical transceivers such as the XENPAK/X2/XFP. These modules are ideal as receivers for IEEE 10G BASE and SONET OC-192 systems. FEATURES * XMD-MSA compliant ROSA * 10 Gb/s high sensitivity InGaAs PIN-PD * +3.3 V SiGe transimpedance pre-amplifier * Minimum receiver sensitivity Pr = -20 dBm * Operating case temperature TC = -5 to +85C * Transimpedance Zt = 2 000 (Single-ended) * Cut-off frequency fc = 11 GHz * With flexible printed circuit Document No. PL10638EJ01V0DS (1st edition) Date Published September 2006 NS CP(K) 2006 NR3312 Series PACKAGE DIMENSIONS (UNIT: mm) NR3312TF 7.00.1 4.640.05 6.60.1 OFF-SET 0.17 5.50.02 1.20.1 4.9 16.40.3 (2.51) 2.40.1 11.51+0.1 -0.15 OPTICAL REFERENCE PLANE 5.6 MAX. 16.2 BOTTOM VIEW 1.0 5-0.79 2.4 2.8 1.3 2.0 13.2 2 Preliminary Data Sheet PL10638EJ01V0DS 3.0 6-0.35 0.27 2.8 2.8 5.6 12- 0.15 2-R0.35 Vpd GND DATA N DATA P GND VCC NR3312 Series NR3312TG 5.00.1 0.550.03 OPTICAL REFERENCE PLANE 1.35 2.990.01 1.3 13.6 3.50.1 5.50.05 5.6 MAX. 16.2 BOTTOM VIEW 1.0 5-0.79 2.4 0.27 2.8 2.8 2.8 1.3 2.0 13.2 Preliminary Data Sheet PL10638EJ01V0DS 5.6 12- 0.15 2-R0.35 Vpd GND DATA N DATA P GND VCC 6-0.35 8.7 4.05 2.920.01 5.150.05 OFF-SET (0.17) 3.0 3 NR3312 Series NR3312TP 5.00.1 2.990.01 (12.4) OPTICAL REFERENCE PLANE 5.150.05 0.550.03 (7.5) (4.05) OFF-SET 0.17 3.80.02 1.20.1 5.50.02 5.6 MAX. 16.2 BOTTOM VIEW 1.0 5-0.79 2.4 2.8 1.3 2.0 13.2 4 Preliminary Data Sheet PL10638EJ01V0DS 3.0 6-0.35 0.27 2.8 2.8 5.6 12- 0.15 2-R0.35 Vpd GND DATA N DATA P GND VCC NR3312 Series NR3312TX 7.00.1 4.640.05 6.60.1 OFF-SET 0.17 5.50.02 1.20.1 4.9 16.40.3 (2.51) 2.40.1 11.51+0.1 -0.15 OPTICAL REFERENCE PLANE 5.6 MAX. 16.2 BOTTOM VIEW 1.0 5-0.79 2.4 2.8 1.3 2.0 13.2 Preliminary Data Sheet PL10638EJ01V0DS Vpd GND DATA N DATA P GND VCC 6-0.35 0.27 2.8 2.8 5.6 12- 0.15 2-R0.35 3.0 5 NR3312 Series BLOCK DIAGRAM Flexible Printed Circuit Vpd 0.1F 100 pF GND GND GND PD DATA P TIA DATA N 0.1F GND 100 pF GND VCC 6 Preliminary Data Sheet PL10638EJ01V0DS NR3312 Series ORDERING INFORMATION Part Number NR3312TF-AZ Receptacle Type Note SC, Zirconia Differential output with flexible PCB NR3312TG-AZ LC, Electrically Isolated Differential output with flexible PCB NR3312TP-AZ LC, Zirconia Differential output with flexible PCB NR3312TX-AZ SC, Metal Differential output with flexible PCB ABSOLUTE MAXIMUM RATINGS Parameter Symbol Ratings Unit PIN-PD Reverse Voltage VR 10 V PIN-PD Reverse Current IR 10 mA IC Supply Voltage VCC -0.7 to +5.0 V Operating Case Temperature TC -5 to +85 C Storage Temperature Tstg -40 to +85 C Maximum AOP Input Pin +5 dBm Tsld 350 (3 sec.) C (ER < 5.4 dB (1.1 A/W)) Lead Soldering Temperature (Flexible Printed Circuit) RECOMMENDED OPERATING CONDITION Parameter Symbol MIN. TYP. MAX. Unit PIN-PD Reverse Voltage VR 3.1 3.3 3.5 V IC Supply Voltage VCC +3.1 +3.3 +3.5 V Operating Case Temperature TC -5 +25 +85 C ELECTRO-OPTICAL CHARACTERISTICS ( = 1 310 nm/1 550 nm, unless otherwise specified) Parameter Symbol Sensitivity S Transimpedance Zt Conditions RL = 50 , Pin = -17 dBm, MIN. TYP. MAX. Unit 0.75 0.9 800 2 000 3 000 100 125 200 mVpp 7 11 A/W Single-ended Maximum Output Voltage Swing Cut-off Frequency Vclip fC Single-ended RL = 50 , Pin = -17 dBm, GHz -3 dB from 1 GHz Minimum Receiver Sensitivity Pr 9.95 Gb/s, BER = 10- , -20 12 PRBS = 2 -1, ER = 13 dB, NRZ, -17 dBm 31 Overload PO IC Supply Current ICC = 1 550 nm Preliminary Data Sheet PL10638EJ01V0DS +0.5 +3 40 55 dBm 75 mA 7 NR3312 Series Optical Return Loss 8 ORL Preliminary Data Sheet PL10638EJ01V0DS -27 dB NR3312 Series REFERENCE Document Name *1 Opto-Electronics Devices Pamphlet Document No. PX10160E *1 Published by the former NEC Compound Semiconductor Devices, Ltd. Preliminary Data Sheet PL10638EJ01V0DS 9 NR3312 Series * The information in this document is current as of September, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 10 Preliminary Data Sheet PL10638EJ01V0DS NR3312 Series Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. Caution Optical Fiber A glass-fiber is attached on the product. Handle with care. * When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part or fragments. For further information, please contact NEC Compound Semiconductor Devices Hong Kong Limited E-mail: contact@ncsd-hk.necel.com Hong Kong Head Office TEL: +852-3107-7303 FAX: +852-3107-7309 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office TEL: +82-2-558-2120 FAX: +82-2-558-5209 NEC Electronics (Europe) GmbH http://www.eu.necel.com/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 Compound Semiconductor Devices Division NEC Electronics Corporation URL: http://www.ncsd.necel.com/ 0604 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.