88
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Miniature Aluminum Electrolytic Capacitors
RADIAL LEADS, POLARIZED, NEW REDUCED CASE
SIZING (FURTHER REDUCED FROM NRSA SERIES)
EXPANDED TAPING AVAILABILITY
NRSS Series
CHARACTERISTICS
NRSA NRSS
(today’s standard) (reduced sizes)
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specifi c application - process details with
NIC’s technical support personnel: tpmg@niccomp.com
Rated Voltage Range 6.3 ~ 100Vdc
Capacitance Range 10 ~ 10,000μF
Operating Temperature Range -40 ~ +85°C
Capacitance Tolerance ±20%(M)
Max. Leakage Current @ +20°C After 1 min. 0.03CV or 4μA, whichever is greater
After 2 min. 0.01CV or 3μA, whichever is greater
Max. Tan δ @ 120Hz/+20°C
W.V. (Vdc) 6.3 10 16 25 35 50 63 100
S.V. (Vdc) 8 13 20 32 44 63 79 125
C < 1,000μF0.28 0.24 0.20 0.18 0.14 0.12 0.10 0.08
C = 2,200μF0.30 0.26 0.22 0.18 0.18 0.14 - -
C = 3,300μF0.32 0.28 0.24 0.20 0.18 0.18 - -
C = 4,700μF 0.34 0.30 0.26 0.22 0.20 - - -
C = 6,800μF 0.36 0.32 0.28 0.24 - - - -
C = 10,000μF 0.38 0.34 0.30 - - - - -
Low Temperature Stability
Inpedance Ratio @ 120Hz
Z-25°C/Z+20°C 5 4 322222
Z-40°C/Z+20°C 12 10 854444
Load Life Test at Rated W.V.
+85°C 2,000 Hours
Capacitance Change Within ±20% of initial measured value
Tan δLess than 200% of specifi ed maximum value
Leakage Current Less than specifi ed maximum value
Shelf Life Test
85°C 1,000 Hours
No Load
Capacitance Change Within ±20% of initial measured value
Tan δLess than 200% of specifi ed maximum value
Leakage Current Less than specifi ed maximum value
LEAD SPACING AND DIAMETER (mm)
STANDARD PRODUCT AND CASE SIZE TABLE D φ x L (mm)
β = L < 20mm = 1.5mm, L > 20mm = 2.0mm
Cap.
(μF) Code Working Voltage (Vdc)
6.3 10 16 25 35 50 63 100
10100-------6.3x11
22220------5x11 8x11.5
33 330 - - - - See NRSA 5x11 See NRSA 8x12.5
47 470 - - - See NRSA 5x11 See NRSA 6.3x11 10x12.5
100 101 - - 5x11 See NRSA 6.3x11 See NRSA 8x11.5 10x20
150 151 - - - 6.3x11 - - - -
220 221 - 5x11 6.3x11 See NRSA 8x11.5 10x12.5 10x16 12.5x25
330 331 - 6.3x11 See NRSA 8x11.5 10x12.5 10x16 10x20 12.5x25
470 471 6.3x11 6.3x11 8x11.5 10x12.5 10x16 10x20 12.5x20 16x25
1,000 102 8x11.5 10x12.5 10x16 10x20 12.5x20 12.5x25 16x25 -
2,200 222 10x16 10x20 12.5x20 12.5x25 16x25 16x31.5 --
3,300 332 10x20 12.5x20 12.5x25 16x25 16x31.5 18x36 - -
4,700 472 12.5x20 12.5x25 16x25 16x31.5 18x36 - - -
6,800 682 12.5x25 16x25 16x31.5 18x35.5 ----
10,000 103 16x25 16x31.5 18x35.5 -----
Case Dia. (Dφ)5 6.3 8 10 12.5 16 18 22
Lead Dia (dφ)0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8
Lead Spacing (F) 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10
Dim. α0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0
*See Part Number System for Details
RoHS
Compliant
includes all homogeneous materials
dφ ± 0.05
Insulation Sleeve
F ± 0.5
Dφ ± α
4mm
Min.
15mm Min.
L + β max.
Polarity Marking
Drawing is representative of parts as supplied in bulk or
straight lead format, please see taping specifi cation for details
on taped format packaging.
89
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
RIPPLE CURRENT FREQUENCY CORRECTION FACTOR
Frequency (Hz) 50 120 300 1K 10K
~ 47μF0.75 1.00 1.35 1.57 2.00
100 ~ 470μF0.80 1.00 1.23 1.34 1.50
1,000μF ~ 0.85 1.00 1.10 1.13 1.15
Miniature Aluminum Electrolytic Capacitors NRSS Series
Part Number Cap.
(μF)
W.V.
(Vdc))
Dissipation Factor
+20°C/120Hz
Ripple Current Rating (mA)
+85°C/120Hz
Max. ESR (Ω)
+20°C/120Hz
Load Life Hours
@ +85°C
NRSS471M6.3V6.3x11F 470
6.3
0.28 320 0.99 2,000
NRSS102M6.3V8x11.5F 1,000 0.28 540 0.46 2,000
NRSS222M6.3V10x16F 2,200 0.30 900 0.23 2,000
NRSS332M6.3V10x20F 3,300 0.32 1050 0.16 2,000
NRSS472M6.3V12.5x20F 4,700 0.34 1350 0.12 2,000
NRSS682M6.3V12.5x25F 6,800 0.36 1600 0.088 2,000
NRSS103M6.3V16x25F 10,000 0.38 2000 0.063 2,000
NRSS221M10V5x11F 220
10
0.24 220 1.81 2,000
NRSS331M10V6.3x11F 330 0.24 290 1.21 2,000
NRSS471M10V6.3x11F 470 0.24 350 0.85 2,000
NRSS102M10V10x12.5F 1,000 0.24 620 0.40 2,000
NRSS222M10V10x20F 2,200 0.26 970 0.20 2,000
NRSS332M10V12.5x20F 3,300 0.28 1250 0.14 2,000
NRSS472M10V12.5x25F 4,700 0.30 1500 0.11 2,000
NRSS682M10V16x25F 6,800 0.32 1850 0.078 2,000
NRSS103M10V16x31.5F 10,000 0.34 2350 0.056 2,000
NRSS101M16V5x11F 100
16
0.20 160 3.32 2,000
NRSS221M16V6.3x11F 220 0.20 260 1.51 2,000
NRSS471M16V8x11.5F 470 0.20 440 0.71 2,000
NRSS102M16V10x16F 1,000 0.20 710 0.33 2,000
NRSS222M16V12.5x20F 2,200 0.22 1150 0.16 2,000
NRSS332M16V12.5x25F 3,300 0.24 1400 0.12 2,000
NRSS472M16V16x25F 4,700 0.26 1700 0.092 2,000
NRSS682M16V16x31.5F 6,800 0.28 2150 0.068 2,000
NRSS103M16V18x35.5F 10,000 0.30 2700 0.050 2,000
NRSS151M25V6.3X11F 150
25
0.16 220 1.76 2,000
NRSS331M25V8x11.5F 330 0.18 390 0.80 2,000
NRSS471M25V10x12.5F 470 0.18 520 0.56 2,000
NRSS102M25V10x20F 1,000 0.18 830 0.27 2,000
NRSS222M25V12.5x25F 2,200 0.18 1300 0.14 2,000
NRSS332M25V16x25F 3,300 0.20 1650 0.10 2,000
NRSS472M25V16x31.5F 4,700 0.22 2050 0.078 2,000
NRSS682M25V18x35.5F 6,800 0.24 2550 0.059 2,000
NRSS470M35V5x11F 47
35
0.14 130 4.94 2,000
NRSS101M35V6.3x11F 100 0.14 210 2.32 2,000
NRSS221M35V8x11.5F 220 0.14 350 1.06 2,000
NRSS331M35V10x12.5F 330 0.14 470 0.70 2,000
NRSS471M35V10x16F 470 0.14 580 0.49 2,000
NRSS102M35V12.5x20F 1,000 0.14 1000 0.23 2,000
NRSS222M35V16x25F 2,200 0.18 1550 0.12 2,000
NRSS332M35V16x31.5F 3,300 0.18 1950 0.090 2,000
NRSS472M35V18x36F 4,700 0.20 2400 0.071 2,000
NRSS330M50V5x11F 33
50
0.12 120 6.03 2,000
NRSS221M50V10x12.5F 220 0.12 410 3.53 2,000
NRSS331M50V10x16F 330 0.12 520 1.66 2,000
NRSS471M50V10x20F 470 0.12 650 0.75 2,000
NRSS102M50V12.5x25F 1,000 0.12 1100 0.50 2,000
NRSS222M50V16x31.5F 2,200 0.14 1700 0.35 2,000
NRSS332M50V18x36F 3,300 0.18 2200 0.17 2,000
NRSS220M63V5x11F 22
63
0.10 100 7.54 2,000
NRSS470M63V6.3x11F 47 0.10 170 3.53 2,000
NRSS101M63V8x11.5F 100 0.10 270 1.66 2,000
NRSS221M63V10x16F 220 0.10 470 0.75 2,000
NRSS331M63V10x20F 330 0.10 710 0.50 2,000
NRSS471M63V12.5x20F 470 0.10 900 0.35 2,000
NRSS102M63V16x25F 1,000 0.10 1300 0.17 2,000
STANDARD PRODUCT, SPECIFICATIONS AND CASE SIZES D φ x L (mm)
90
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Part Number Cap.
(μF)
W.V.
(Vdc))
Dissipation Factor
+20°C/120Hz
Ripple Current Rating (mA)
+85°C/120Hz
Max. ESR (Ω)
+20°C/120Hz
Load Life Hours
@ +85°C
NRSS100M100V6.3x11F 10
100
0.08 85 13.3 2,000
NRSS220M100V8x11.5F 22 0.08 130 6.03 2,000
NRSS330M100V8x12.5F 33 0.08 180 4.02 2,000
NRSS470M100V10x12.5F 47 0.08 230 2.82 2,000
NRSS101M100V10x20F 100 0.08 370 1.33 2,000
NRSS221M100V12.5x25F 220 0.08 620 0.60 2,000
NRSS331M100V12.5x25F 330 0.08 760 0.40 2,000
NRSS471M100V16x25F 470 0.08 1000 0.28 2,000
PART NUMBERING SYSTEM
Size (D∅ x L)
Tape and Box*
Series
Capacitance Code
Tolerance Code
Rated Voltage
RoHS Compliant
NRSS 101 M35V 6.3X11 TBF
*see taping specifi cations for details
Miniature Aluminum Electrolytic Capacitors NRSS Series
STANDARD PRODUCT, SPECIFICATIONS AND CASE SIZES D φ x L (mm)
198 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Miniature Aluminum Electrolytic Capacitors Taping Specifi cations
Taping Dimensions (mm)
Taping Dimensions (mm)
NOTE: ANODE (+) LEAD FEEDS OFF FIRST.
FOR OPTION OF NEGATIVE (
_) LEAD FIRST,
SPECIFY “TBN”.
STANDARD RADIAL TAPING (5mm LEAD SPACING, FORMED LEADS) TB
Case Dia.
(Dφ)10 12.5
Case Size All All
Dim.
dφ ±0.05 0.6 0.6
H ±0.75 19.0 19.0
F +0.8 ~ -0.2 5.0 5.0
P ±1.0 25.4*
P012.7 ±0.2
P13.85
P26.35 ±1.0
W 18.0 ±0.5
W011.5 min
W19.0 ±0.5
W20 ~ 2.5
H016.0 ±0.5
I 1.0 max.
D0φ4.0 ±0.2
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
*Optional Taping Specifi cations
10mm diameter available with P dim. = 12.7mm
(P/N Suffi x: TB12.7MMP)
12.5mm diameter available with P dim. = 15mm, P1= 5.0mm,
P0 = 15.0mm & P2 = 7.5mm (P/N Suffi x: TB15MMP)
Case Dia.
(Dφ)4 5 6.3 8
Case Size 4x5
4x7 5x5
5x7 5x11 6.3x5
6.3x7 6.3x11 8x11.5
Dim.
dφ ±0.05 0.45 0.45 0.5 0.45 0.5 0.6
H ±0.75 17.5 17.5 18.5 17.5 18.5 20.0
F +0.8 ~ -0.2 5.0 -02 ~ +0.8
P 12.7 ±1.0
P012.7 ±0.2
P13.85 ±0.5 (at end of tape)
P26.35 ±1.0
W 18.0 ±0.5
W011.5 min.
W19.0 ±0.5
W20 ~ 2.5
H016.0 ±0.5
I 1.0 max.
D0φ4.0 ±0.2
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
STANDARD RADIAL TAPING (5mm LEAD SPACING, STRAIGHT LEADS) TB
P2P
∅D
P1
w2
w0
w
0
P0
F
S∅D0
∅dWH
H0
1max
t
Δh
1max
t
Δh
P2P
∅D
P1
w2
w0
w
0
P0
F
S∅D0
∅dW1H
199
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Taping Dimensions (mm) SPECIAL STRAIGHT LEAD TAPING TBST
SPECIAL RADIAL TAPING (2.5mm LEAD SPACING, FORMED LEADS) TBF1
Case Dia.
(Dφ)4 5 6.3 8
Case Size 4x5
4x7 5x5
5x7 5x11 6.3x5
6.3x7 6.3x11 8x11.5
Dim.
dφ ±0.05 0.45 0.45 0.5 0.45 0.5 0.6
H ±0.75 17.5 17.5 18.5 17.5 18.5 20.0
F +0.8 ~ -0.2 2.0* 2.0 2.0 2.5 2.5 3.5
P ±1.0 12.7 ±0.2
P012.7 ±0.2
P15.1 5.1 5.1 5.1 5.1 4.6
P26.35 ±1.0
W 18.0 ±0.5
W011.5 min.
W19.0 ±0.5
W20 ~ 2.5
H016.0 ±0.5
I 1.0 max.
D0φ4.0 ±0.2
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
* Parts with 4mm diameter are taped with a slight fl are in the
lead and a 2.0mm lead-space.
Miniature Aluminum Electrolytic Capacitors Taping Specifi cations
Case Dia.
(Dφ)45
Case Size 4x5
4x7 5x5
5x7 5x11
Dim.
dφ ±0.05 0.45 0.45 0.5
H ±0.75 17.5 17.5 18.5
H0 ±0.5 16.0 - -
F 2.5 -02 ~ +0.8
P 12.7 ±1.0
P012.7 ±0.2
P15.1 ±0.5
P26.35 ±1.0
W 18.0 ±0.5
W011.5 min.
W19.0 ±0.5
W20 ~ 1.5
I 1.0 max.
D0φ4.0 ±0.2
Δh 0 ±1.0
t 0.7 ±0.2
Taping Dimensions (mm)
1max
t
Δh
P2P
∅D
P1
w2
w0
w
0
P0
F
S∅D0
∅dW1H
P2P
∅D
P1
w2
w0
w
0
P0
F
S∅D0
∅dWH
1max
t
Δh
H0
200 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Miniature Aluminum Electrolytic Capacitors
RADIAL TAPED PACKAGING
Taping Specifi cations
Ammo Box (Tape & Box) TB, TBF1, TBST
Size of box and component quantity
*Special Taping Consult Factory For Availability
Ammo Box Dimensions (mm)
Scored corner
L
H
W
Label ⊕
-
Case Dia (Dφ)
or Case Size Q'ty per
Box
(pcs) Dim. L Dim. H Dim.
W
4x5, 4x7 2,000 331 175 43
5x5, 5x7 2,000 331 220 43
5x11 2,000 340 255 55
6.3x5, 6.3x7 2,000 331 280 43
6.3x11 2,000 331 280 48
8x11.5, 8x12.5 1,000 335 235 53
10x12.5* 500 335 190 53
10x16* 500 335 300 53
10x20* 500 335 300 55
12.x20* 500 335 300 55
12.5x25* 500 335 300 61
