Product
Specification 108-1990-2
12Jun02 Rev A
EC 0990-0882-02
NETCONNECT* SL Series Category 5e Jacks
©2002 T
y
co El ectronics Corporation
Harrisbur
g
, PA
All International Ri
g
hts Reserved.
This controlled document is subject to chan
g
e.
For latest revision call AM P FAX*/Product Info
num ber 1-800-522-6752. 1 of 3
* Trademark
| Indicates chan
g
e
For Re
g
ional Cus tomer Service, visit our
website at www.tycoelectronics.com LOC B
1. SCOPE
1.1. Content
This specifi c ation covers transm ission performance re
q
uir ements for NE TCO NNE CT* Cat e
g
or
y
5e
shiel ded and unshi elded S L 110
j
acks. T hese assembl ies are desi
g
ned for installation int o var ious
outlet plates, surfac e mount boxes, panels, and other si mi lar t
y
pe fit tin
g
s. Jacks incorporate IDC
terminals for termi nati n
g
both shielded or unshi elded twisted pair c ommunicat ions cable and will
accommodate 22 - 24 A WG sol id and 24 A WG str anded c onduc tors. The maxi mum conductor
insul ation diameter is 1.27 mm [. 050 in].
1.2. Qualification
When t ests are performed on the sub
j
ect pr oduc t line, pr oc edur es specified in F i
g
ure 1 shall be used.
Al l inspect ions shall be performed usin
g
the applicable inspect ion plan and pr oduc t drawin
g
.
1.3. Qualifi c ation T est Resul ts
Successf ul
q
ualification testin
g
on the sub
j
ect pr oduc t line was completed on 12Mar02. T he
Qualifi c ation T est Repor t number for this testin
g
is 501-528-2. T his documentat ion is on file at and
avai lable from En
g
ineerin
g
Practices and St andar ds
(
EPS
)
.
2. APPLICABLE DOCUMENTS
The fol lowin
g
document s for m a part of t his specifi c ation t o the extent specified her ein. Unless
otherwise specified, the lat est edition of the document applies. In t he event of confl ic t bet ween the
re
q
uir ements of this specifi c ati on and the produc t drawin
g
, t he pr oduc t drawin
g
shall take pr ec edenc e.
In t he event of confl ic t bet ween the re
q
uir ements of this specifi c ati on and the referenc ed doc uments,
this specifi c ation shall take pr ec edenc e.
2.1. T
y
co Electronic s Documents
108-1990:P r oduc t Spec ification (NETCO NNE CT* SL S er ies Jack s and Categor y 6 P lugs)
114-6053:A pplic ation Spec ifi c ation (High P er formance Modular P lug Connectors)
408-8417:Instruc tion Sheet (S L S er ies 110 Connect M odular J ac k s)
408-8602:Instruc tion Sheet (S hielded S L S er ies 110 Connect M odular J ac k s)
501-528-2: Qualifi c ation T est Repor t
2.2. Industrial S tandards
ANSI\TIA/EIA-568-B. 2: Com mercial B uilding Tel ec ommunications Cabling S tandard P ar t 2:
Bal anc ed Twisted-P air Cabling Components
AST M D4566- 98: Standar d Test Methods for E lec tric al P er formanc e P r oper ties of I nsul ation
and Jackets for Telecommunicat ions Wir e and Cable
108-1990-2
Rev A 2 of 3
3. REQUIREMENTS
3.1. Desi
g
n and Construct ion
Product shall be of t he desi
g
n, constr uc tion and ph
y
sical dimensi ons specified on t he applicable
customer dr awin
g
.
3.2. Materials
Mater ials used in t he c onstr uc tion of this product shall be as specifi ed on the applicable c ustomer
drawin
g
.
3.3. Performanc e and Test Descript ion
Product is desi
g
ned to meet t he transmission performance r e
q
uir ements specified in F i
g
ure 1. Unless
otherwise specified, all tests shall be per formed at ambient envir onmental conditions.
3.4. Test Re
q
uir ements and Proc edur es Summar
y
Test Descript ion Re
q
uirement Procedure
Attenuation. ANSI/TIA/EIA-568-B.2,
para
g
raph 5.4.2. AST M D4566- 98,
para
g
raph 26.
Near end crosstal k
(
NEXT
)
. ANSI/TIA/EIA-568-B.2,
para
g
raph 5.4.3. AST M D4566- 98,
para
g
raph 24.
Return loss. ANSI/TIA/EIA-568-B.2,
para
g
raph 5.4.4. AST M D4566- 98,
para
g
raph 45.
Far end c r osstal k
(
FEXT
)
. ANSI/TIA/EIA-568-B.2,
para
g
raph 5.4.5. AST M D4566- 98,
para
g
raph 25.
Propa
g
ation dela
y
. ANSI/TIA/EIA-568-B.2,
para
g
raph 5.4.6. AST M D4566- 98,
para
g
raph 40.
Propa
g
ation dela
y
skew. ANSI/TIA/EIA-568-B.2,
para
g
raph 5.4.7. AST M D4566- 98,
para
g
raph 40.
Fi
g
ure 1
3.5. Product Q ualification and Re
q
ualification T est S e
q
uence
Test or E xaminat ion Test G r oup
(
a
)
1
Test Se
q
uence
(
b
)
Attenuation 1
Near end crosstal k
(
NEXT
)
2
Return loss 3
Far end c r osstal k
(
FEXT
)
4
Propa
g
ation dela
y
5
Propa
g
ation dela
y
skew 6
(a) See paragraph 4.1. A .
NOTE
(b) Numbers indic ate sequenc e in whic h tests ar e per form ed.
Fi
g
ure 2
108-1990-2
Rev A 3 of 3
4. QUALITY ASSURANCE PROVISIONS
4.1. Qualifi c ation T estin
g
A. Specimen Selecti on
Plu
g
s and
j
acks shall be pr epar ed in ac c or danc e with applicable Instruc tion Sheet and shal l be
select ed at random fr om curr ent produc ti on. T est
g
roup shall consi st of 30 speci mens
(
plu
g
and
j
ack
)
. Test plu
g
s per TIA /EIA- 568- B .2 shall be used.
B. Test Se
q
uence
Qualifi c ation inspection shall be verifi ed b
y
testin
g
specimens as specifi ed in Fi
g
ure 2.
4.2. Re
q
ualification Testin
g
If chan
g
es si
g
nificantl
y
affectin
g
form, fit or funct ion ar e made to the produc t or manufacturin
g
process
or controllin
g
industr
y
specifi c ation, pr oduc t assurance shall c oor dinate re
q
ualification testin
g
,
consistin
g
of all or par t of the or i
g
inal testin
g
se
q
uence as determined b
y
devel opment/produc t,
q
ualit
y
and rel iabilit
y
en
g
ineerin
g
.
4.3. Acceptance
Acceptance is based on ver ificati on that the produc t meets the re
q
uir ements of Fi
g
ure 1. Failures
att r ibuted t o e
q
uipment, t est setup or oper ator deficiencies shall not dis
q
ualif
y
the produc t. If product
failure oc c ur s, c or r ec tive ac ti on shal l be taken and samples resubmitt ed for
q
ualification. Testin
g
to
confir m corr ec tive action is re
q
uir ed before r esubmit tal.
4.4. Qualit
y
Conformance I nspect ion
The applicable
q
ualit
y
inspect ion plan shal l specif
y
the sam plin
g
accept able
q
ualit
y
level to be used.
Dimensional and funct ional r e
q
uir ements shall be in acc or danc e with t he applic able produc t drawin
g
and this specifi c ation.
