MIL-DTL-38999 Series I Type Connectors with PCB contacts LJTP02R box mounting receptacle (back panel mounting) L MAX. S .905 R (TP) .006 .000 M R (TP) Z PCB TAIL STICKOUT KK N S SS .062 .001 DIA. FOR SIZE 16 CONTACTS .019 .001 DIA. FOR SIZE 20 & 22D CONTACTS P T (4 HOLES) HOW TO ORDER * Order by applicable 88/91 part number in table below. 88 prefix designates olive drab cadmium plated connector shell. 91 prefix designates electroless nickel plated connector shell. * Add insert arrangement to end of number. Refer to insert availability chart on page 4 and pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use. Example part number: 88-569711-35P designates shell size 9 with a 9-35 insert and pin contacts in normal position. * Z dimension is determined by contact type in the insert arrangement. * Most common options are shown; other options are available. + .005 DIA M Z Shell Size Part Number L Max. M +.000 -.005 N +.001 -.005 P Max. Panel Thickness R (TP) S +.011 -.010 T Dia. .005 KK Dia. +.006 -.005 SS Dia. +.000 -.016 Size 16 & 20 Contacts Size 22D Contacts 9 88/91-569711-XXX .203 .820 .572 .234 .719 .938 .128 .433 .662 .454 - .401 .468 - .406 11 712-XXX .203 .820 .700 .234 .812 1.031 .128 .557 .810 .454 - .401 .468 - .406 13 713-XXX .203 .820 .850 .234 .906 1.125 .128 .676 .960 .454 - .401 .468 - .406 15 714-XXX .203 .820 .975 .234 .969 1.219 .128 .801 1.085 .454 - .401 .468 - .406 17 715-XXX .203 .820 1.100 .234 1.062 1.312 .128 .926 1.210 .454 - .401 .468 - .406 19 716-XXX .203 .820 1.207 .234 1.156 1.438 .128 1.032 1.317 .454 - .401 .468 - .406 21 717-XXX .234 .790 1.332 .204 1.250 1.562 .128 1.157 1.442 .454 - .401 .468 - .406 23 718-XXX .234 .790 1.457 .204 1.375 1.688 .147 1.282 1.567 .454 - .401 .468 - .406 25 719-XXX .234 .790 1.582 .193 1.500 1.812 .147 1.407 1.692 .454 - .401 .468 - .406 All dimensions for reference only. 29