www.bitechnologies.com
MAGNETIC COMPONENTS SELECTOR GUIDE 2006 EDITION
We reserve the right to change specifications without prior notice.
26
HM64-101R0 1.0 0.80 1.67 2.1 0.103
HM64-102R2 2.2 1.60 1.40 1.4 0.130
HM64-104R7 4.7 3.22 0.98 1.0 0.180
HM64-10100 10.0 6.96 0.67 0.68 0.240
HM64-10150 15.0 10.71 0.54 0.54 0.330
HM64-10220 22.0 15.26 0.45 0.45 0.360
HM64-10330 33.0 23.59 0.37 0.37 0.550
HM64-10470 47.0 32.48 0.31 0.31 0.850
Specifications @ 25°C
Inductance Rated (1)
Part @100kHz, 0.1 V RMS DC Current Isat (2) DC Resistance
Number Zero DC (µH ±20%) with DC (µH Min.) Amps Amps Ω Max.
Notes: (1) Rated DC current is the approximate current at which inductance will be decreased by 30% from it’s initial (zero DC) value
or the DC current at which ∆T = 40°C, whichever is lower.
(2) Peak Current (Isat) for approximately 30% inductance roll-off.
Outline Dimensions (mm)
Figure 1 Recommended Solder Pad Layout
5.6 0.8
4.5
5.1 + 0.2
1.6 + 0.2
5.7 + 0.3
7.5 + 0.25
Electrical / Environmental
• Operating Temperature Range -40°C to +125°C
Micropower Low Profile Surface Mount Inductors
RoHS
Compliant for
‘LF’ Models
Standard: Embossed Tape & Reel
Reel: Diameter: = 7” (177.8mm)
Capacity: = 500 Units
Packaging
2006 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE
We reserve the right to change specifications without prior notice
www.bitechnologies.com
27
Electrical Characteristics @ 25°C
Ordering Information
Inductance Code:
First 2 digits are significant. Last digit
denotes the number of trailing zeros.
For values below 10µH, “R“ denotes
the decimal point.
Model Series
Case Size
Lead-Free Option
LF = Lead-Free
(No code used for
non lead-free part)
HM64 10 1R0 LF TR7
TR - Tape & Reel Packing
7 - 7” reel
