Mixed Signal Daughter Card Quickstart Card This daughter card is designed for connection to the mixed signal header on the SmartFusion(R) Evaluation Kit (A2F-EVAL-KIT-2) or Development Kit (A2F500-DEV-KIT-2). The board comes with rubber feet attached. If it is being used with the development kit, the standoffs supplied in the box can be attached to match board height. Test point (TP) signals are listed below: TP Signal TP Signal TP Signal TP Signal TP1 TP2 TP3 TP4 TP5 TP6 TP7 TP8 TP9 TP10 TP11 TP12 TP13 TP14 TP15 MSS_GP_IO_0 MSS_GP_IO_1 MSS_GP_IO_2 MSS_GP_IO_3 MSS_GP_IO_4 MSS_GP_IO_5 MSS_GP_IO_6 MSS_GP_IO_7 MSS_GP_IO_8 MSS_GP_IO_9 MSS_GP_IO_10 MSS_GP_IO_12 MSS_GP_IO_11 MSS_GP_IO_13 MSS_GP_IO_14 TP16 TP17 TP18 TP19 TP20 TP21 TP22 TP23 TP24 TP25 TP26 TP27 TP28 TP29 TP30 MSS_GP_IO_15 F2-200-IO_0 F2-200-IO_2 F2-200-IO_1 F2-200-IO_3 F2-200-IO_4 F2-200-IO_5 F2-200-IO_6 F2-200-IO_8 F2-200-IO_7 PWM1 PWM0 DACOUT1 DACOUT0 AT2 TP31 TP32 TP33 TP34 TP35 TP36 TP37 TP38 TP39 TP40 TP41 TP42 TP43 TP44 AC2 ATGND1 AC3 AT3 AC4 AT4 AV1_1 ATGND2 AV1_3 AV2_1 AV2_4 AV2_3 ADC2 AV1_4 TP45 TP46 TP47 TP48 TP49 TP50 TP51 TP52 TP53 TP54 TP55 TP56 TP57 TP58 ADC4 ADC3 ADC6 ADC5 ADC8 ADC7 ADC10 ADC9 AC1 ADC11 VEX_5V V3P3 GND GND (c) 2012 Microsemi Corporation. All rights reserved. Mixed Signal Daughter Card Quickstart Card The mixed signal connector connects directly to the SmartFusion Evaluation Kit or Development Kit mixed signal header. Mixed Signal Connector Un Regulated 5V Supply VEX_5V J1 MSS_GP_IO_0 MSS_GP_IO_2 MSS_GP_IO_4 MSS_GP_IO_5 MSS_GP_IO_8 MSS_GP_IO_10 MSS_GP_IO_11 MSS_GP_IO_14 F2-200-IO_0 F2-200-IO_1 F2-200-IO_4 F2-200-IO_6 F2-200-IO_7 PWM0 DACOUT0 AC2 AC3 AC4 AV1_1 AV1_3 AV2_4 ADC2 ADC4 ADC6 ADC8 ADC10 AC1 V3P3 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 81 83 85 87 89 91 93 95 97 99 5V_1 5V_3 GND1 F2-200-0-MSSIO F2-200-2-MSSIO F2-200-4-MSSIO F2-200-5-MSSIO DGND2 F2-200-8-MSSIO F2-200-10-MSSIO F2-200-11-MSSIO DGND4 F2-200-14-MSSIO F2-200-0-FPGAIO F2-200-1-FPGAIO DGND6 F2-200-4-FPGAIO F2-200-6-FPGAIO F2-200-7-FPGAIO F2-200 PWM0 DGND8 AGND1 OBD0 AGND3 AC2 AGND5 AC3 AGND6 AC4 AGND8 AV1_1 AGND9 AV1_3 AGND11 AV2_4 AGND13 ADC2 AGND15 ADC4 AGND17 ADC6 AGND19 ADC8 AGND21 ADC10 AC1 AGND24 DGND10 3.3V_1 3.3V_3 5V_2 5V_4 GND2 F2-200-1-MSSIO F2-200-3-MSSIO DGND1 F2-200-6-MSSIO F2-200-7-MSSIO F2-200-9-MSSIO DGND3 F2-200-12-MSSIO F2-200-13-MSSIO F2-200-15-MSSIO DGND5 F2-200-2-FPGAIO F2-200-3-FPGAIO F2-200-5-FPGAIO DGND7 F2-200-8-FPGAIO F2-200 PWM1 DGND9 AGND2 OBD1 AGND4 AT2 ATGND1 AT3 AGND7 AT4 ATGND2 AV2_1 AGND10 AV2_3 AGND12 AV1_4 AGND14 ADC3 AGND16 ADC5 AGND18 ADC7 AGND20 ADC9 AGND22 ADC11 AGND23 AGND25 DGND11 3.3V_2 3.3V_4 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 84 86 88 90 92 94 96 98 100 MSS_GP_IO_1 MSS_GP_IO_3 MSS_GP_IO_6 MSS_GP_IO_7 MSS_GP_IO_9 MSS_GP_IO_12 MSS_GP_IO_13 MSS_GP_IO_15 F2-200-IO_2 F2-200-IO_3 F2-200-IO_5 F2-200-IO_8 PWM1 DACOUT1 AT2 ATGND1 AT3 AT4 ATGND2 AV2_1 AV2_3 AV1_4 ADC3 ADC5 ADC7 ADC9 ADC11 CLP-150-02-L-DH MANUFACTURER P/N = CLP-150-02-L-DH MANUFACTURER = Samtec AGND AGND Matting connector " FTSH-150-01-L-D-RA" 2 Mixed Signal Daughter Card Quickstart Card This second connector can be used to probe signals or build add on connectors. It does not connect to any other Microsemi-specific hardware. Break Out Board - Signal Connector Un Regulated 5V Supply VEX_5V J2 MSS_GP_IO_0 MSS_GP_IO_2 MSS_GP_IO_4 MSS_GP_IO_5 MSS_GP_IO_8 MSS_GP_IO_10 MSS_GP_IO_11 MSS_GP_IO_14 F2-200-IO_0 F2-200-IO_1 F2-200-IO_4 F2-200-IO_6 F2-200-IO_7 PWM0 DACOUT0 AC2 AC3 AC4 AV1_1 AV1_3 AV2_4 ADC2 ADC4 ADC6 ADC8 ADC10 AC1 V3P3 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 81 83 85 87 89 91 93 95 97 99 5V_1 5V_3 GND1 F2-200-0-MSSIO F2-200-2-MSSIO F2-200-4-MSSIO F2-200-5-MSSIO DGND2 F2-200-8-MSSIO F2-200-10-MSSIO F2-200-11-MSSIO DGND4 F2-200-14-MSSIO F2-200-0-FPGAIO F2-200-1-FPGAIO DGND6 F2-200-4-FPGAIO F2-200-6-FPGAIO F2-200-7-FPGAIO F2-200 PWM0 DGND8 AGND1 OBD0 AGND3 AC2 AGND5 AC3 AGND6 AC4 AGND8 AV1_1 AGND9 AV1_3 AGND11 AV2_4 AGND13 ADC2 AGND15 ADC4 AGND17 ADC6 AGND19 ADC8 AGND21 ADC10 AC1 AGND24 DGND10 3.3V_1 3.3V_3 5V_2 5V_4 GND2 F2-200-1-MSSIO F2-200-3-MSSIO DGND1 F2-200-6-MSSIO F2-200-7-MSSIO F2-200-9-MSSIO DGND3 F2-200-12-MSSIO F2-200-13-MSSIO F2-200-15-MSSIO DGND5 F2-200-2-FPGAIO F2-200-3-FPGAIO F2-200-5-FPGAIO DGND7 F2-200-8-FPGAIO F2-200 PWM1 DGND9 AGND2 OBD1 AGND4 AT2 ATGND1 AT3 AGND7 AT4 ATGND2 AV2_1 AGND10 AV2_3 AGND12 AV1_4 AGND14 ADC3 AGND16 ADC5 AGND18 ADC7 AGND20 ADC9 AGND22 ADC11 AGND23 AGND25 DGND11 3.3V_2 3.3V_4 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 82 84 86 88 90 92 94 96 98 100 MSS_GP_IO_1 MSS_GP_IO_3 MSS_GP_IO_6 MSS_GP_IO_7 MSS_GP_IO_9 MSS_GP_IO_12 MSS_GP_IO_13 MSS_GP_IO_15 F2-200-IO_2 F2-200-IO_3 F2-200-IO_5 F2-200-IO_8 PWM1 DACOUT1 AT2 ATGND1 AT3 AT4 ATGND2 AV2_1 AV2_3 AV1_4 ADC3 ADC5 ADC7 ADC9 ADC11 TSW-150-14-T-D MANUFACTURER P/N = TSW-150-14-T-D MANUFACTURER = Samtec AGND AGND 3 Mixed Signal Daughter Card Quickstart Card Software and Licensing Download and install the latest release of Libero(R) System-on-Chip (SoC) software from the Microsemi SoC Products Group website (www.microsemi.com/soc) and register for your free Gold license. In order to design with a Cortex-M1-enabled device, you should install both the Libero SoC and SoftConsole tools. SoftConsole is used for programming and debug of embedded processor designs. Software releases: www.microsemi.com/soc/download/software/libero Documentation Resources For further information, including user's guide, tutorial, and full design examples, refer to the SmartFusion Kit pages: SmartFusion Evaluation Kit www.microsemi.com/soc/products/hardware/devkits_boards/smartfusion_eval.aspx SmartFusion Development Kit www.microsemi.com/soc/products/hardware/devkits_boards/smartfusion_dev.aspx SmartFusion Mixed Signal Daughter Card www.microsemi.com/soc/products/hardware/devkits_boards/mpm_dc.aspx Technical Support and Contacts Technical support is available online at www.microsemi.com/soc/support and by email at soc_tech@microsemi.com. Microsemi SoC Sales offices, including Representatives and Distributors, are located worldwide. To find your local representative visit www.microsemi.com/soc/company/contact. 50200273-1/12.12 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Microsemi: MIXED-SIGNAL-DC